Dji RS 2 Bedienungsanleitung

2020.10v1.0

User Manual

Using this Manual

Legend

Warning Important Hints and tips Reference

Before You Begin

The following documents have been produced to help you safely operate and make full

use of your DJI RS 2.

DJI RS 2 Quick Start Guide

DJI RS 2 User Manual

DJI RS 2 Disclaimer and Safety Guidelines

Read this entire quick start guide, user manual and watch the informational and tutorial

videos on the product page of DJI’s ocial website (http://www.dji.com/rs-2). Read the

disclaimer and safety guidelines to understand your legal rights and responsibilities. If

you have any questions or problems during the installation, maintenance, or use of this

product, contact DJI or a DJI authorized dealer.

Download the Ronin App

Search “Ronin” in the App Store or Google Play and follow the instructions for

installation.

Searching for Keywords

Search for keywords such as “battery” and “install” to find a topic. If you are

using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows or

Command+F on Mac to begin a search.

Navigating to a Topic

View a complete list of topics in the table of contents. Click on a topic to navigate

to that section.

Printing this Document

This document supports high resolution printing.

Android 7.0 or aboveiOS 11.0 or above Ronin App

Contents

Using this Manual 2

Legend 2

Before You Begin 2

Download the Ronin App 2

Contents 3

Introduction 4

DJI RS 2 Diagram 5

Getting Started 6

Attaching the Extended Grip/Tripod 6

Mounting the Grip 6

Unlocking and Locking the Gimbal 7

Mounting the Camera 7

Balancing 9

BG30 Grip and Built-In Battery 12

Charging 12

Safety Guidelines 12

Operations 16

Activating DJI RS 2 16

Touchscreen 16

Ronin App Settings 20

Image Transmission 29

Operation Modes 30

Updating Firmware 31

Maintenance 31

Specications 32

Introduction

DJI RS 2 is a professional single-handed 3-axis gimbal specically designed for DSLR

and mirrorless cameras. It is compatible with a wide range of camera setups and

supports a maximum tested payload of up to 4.5 kg.

DJI RS 2 boasts an enhanced gimbal performance thanks to its updated Titan

Stabilization Algorithm. With a full-color screen, users can calibrate the gimbal, set

parameters, and choose from intelligent shooting modes such as ActiveTrack 3.0,

Timelapse, Track, Panorama, and Time Tunnel.

Locks on each axis arm enables faster and more convenient balancing as well as more

secure storage. The onboard buttons allow users to control the gimbal and switch

profiles and working modes. When used with the provided camera control cables,

DJI RS 2 can also control camera focus, shutter, and recording. With the RSA/NATO

ports, accessories such as the Focus Wheel and Twist Grip Dual Handle can be used.

The detachable grip has a built-in battery with a capacity of 1950 mAh, providing a

maximum standby time of up to 12 hours*.

After connecting to the Ronin app, it's easy to control gimbal movement and parameter

settings with intelligent functions such as Panorama, Timelapse, and Track. With the

DJI Ronin RavenEye Image Transmission System mounted, user can shoot smooth

footage while automatically tracking a subject with ActiveTrack 3.0 and use Force

Mobile to control the gimbal by tilting and rotating your mobile phone.

* The standby time was tested with DJI RS 2 well-balanced and without any accessories or camera control

cables attached. The maximum standby time is for reference only.

DJI RS 2 User Manual

DJI RS 2 Diagram

1. Tilt Lock

2. Tilt Motor

3. Pan Lock

4. Pan Motor

5. Touchscreen

6. Ronin Series Accessories (RSA)/

NATO Ports

7. Power Button

8. Camera Control Button

9. M Button

10. BG30 Grip (Built-in battery with

¼"-20 screw hole)

11. Extended Grip/Tripod

12. Joystick

13. Lower Quick-Release Plate

14. Upper Quick-Release Plate

15. Roll Motor

16. Roll Lock

17. Grip Lever/Safety Button

18. Battery Level Indicators

19. Battery Level Button

20. Power Port (USB-C)

21. Trigger

22. Front Dial

23. Image Transmission/Focus Motor

Port (USB-C)

24. Focus Motor Port (USB-C)

25. RSS Camera Control Port (USB-C)

Getting Started

Attaching the Extended Grip/Tripod

Mounting the Grip

Insert the grip into the gimbal as shown 1. Make sure the grip lever is in the unlocked

position 2, and then toggle to the locked position after attaching 3.

To remove the grip, toggle the lever to the unlocked position, hold down the safety

button, and pull the grip away from the gimbal.

DJI RS 2 User Manual

Unlocking and Locking the Gimbal

The gimbal is folded by default. To unfold the gimbal, toggle the tilt lock, roll lock, and

pan lock levers to the unlocked position and adjust the gimbal position as shown, and

then toggle the three locks to the locked position.

Mounting the Camera

Supported Cameras and Lenses

DJI RS 2 has been rigorously tested to support a payload of 4.5 kg. Make sure the

combined weight of the camera, lens, and other accessories are within 4.5 kg. Refer

to the ocial DJI website (https://www.dji.com/support/compatibility?from=manual) for

the most updated DJI RS 2 Camera Compatibility List.

Mounting a Camera

Make sure to prepare the camera before mounting it to DJI RS 2. Remove the lens cap

and check that the battery and memory card are inserted in the camera. Make sure DJI

RS 2 is powered o or in sleep mode before mounting the camera.

1. Attach the Upper Quick-Release Plate

The camera lens and the arrow on the bottom of the upper quick-release plate must

face the same direction. Attach the upper quick-release plate to the camera by

tightening the screw.

Roll Lock Pan Lock

Tilt Lock

DJI RS 2 User Manual

A camera riser is required when using a focus motor or a small camera with a

large lens, such as a Sony A6400 with the Sony FE 24-70 f2.8 GM lens.

2. Attach the Lower Quick-Release Plate and Lens-Fastening Strap

Toggle the lever on the lower quick-release plate to the unlocked position 1,

then insert the camera 2and toggle the lever to the locked position 3after it is

engaged. Attach the lens-fastening strap to the lower quick-release plate 4, and

bind the strap to the camera lens 5. Note that the rubber of the lens-fastening strap

must be directly under the lens.

It is recommended to use the lens-fastening strap when using a long or heavy lens,

and always use the lens-fastening strap before enabling SuperSmooth mode.

To remove the camera from the lower quick-release plate, toggle the lever to the

unlocked position and remove the camera while pressing the safety lock beside the

lever.

Safety Lock 4

3. Attach the Camera to the Gimbal

Toggle the lever on the camera mounting plate to the unlocked position 1and

insert the lower quick-release plate 2. Toggle the lever to the locked position once

the camera is roughly balanced 3.

DJI RS 2 User Manual

To remove the lower quick-release plate, toggle the lever on the camera mounting plate

to the unlocked position and remove the lower quick-release plate while pressing the

safety lock on the mounting plate.

Safety Lock

RSS Camera Control Port

4. Connect the Camera Control Cable

Choose the proper camera control cable according to the camera type. Plug one

end of the cable into the RSS camera control port of the gimbal (shown above) and

plug the other end into the camera.

Balancing

To obtain the best performance from DJI RS 2, proper balancing is essential. Proper

balance is critical for shots with DJI RS 2 where fast motion or acceleration is required

and also oers longer battery runtimes. There are three axes that need to be properly

balanced before powering on DJI RS 2 and setting up the software.

Before Balancing

1. The camera needs to be fully congured, with all accessories and cables connected,

before installing and balancing the camera on the gimbal. If the camera has a lens

cap, make sure to remove it before balancing.

2. Before balancing, make sure to power on the camera if using an optical zoom

lens and to select the focal length if using a varifocal lens. Make sure DJI RS 2 is

powered o or in sleep mode before balancing.

Balancing Steps

1. Balancing the Vertical Tilt

a. Unlock the tilt axis and loosen the mounting plate knob 1.

b. Rotate the tilt axis so that the camera lens is pointing upward. Check to make

sure the camera is not top or bottom-heavy. If top-heavy, move the camera

backward 2. If bottom-heavy, move the camera forward 2.

c. Tighten the mounting plate knob while holding the camera upward. The vertical

tilt is balanced when the camera is steady while pointing upward.

DJI RS 2 User Manual

2. Balancing Depth for the Tilt Axis

a. Rotate the tilt axis so that the camera lens is pointing forward. Toggle the lever to

the unlocked position 1.

b. Check to make sure the camera is not front or back-heavy. If front-heavy, move

the camera backward by turning the knob 2. If back-heavy, move the camera

forward.

c. Toggle the lever to the locked position. The tilt axis is balanced when the camera

is steady while tilted up or down by 45°.

d. Lock the tilt axis.

3. Balancing the Roll Axis

a. Unlock the roll axis. Toggle the lever on the roll arm to the unlocked position 1.

b. Check the direction in which the roll motor swings. If the camera rotates to the

left, move the camera to the right 2. If the camera rotates to the right, move the

camera to the left 2.

c. Toggle the lever on the roll arm to the locked position. The roll axis is balanced

when the camera is steady.

d. Lock the roll axis.

Andere Handbücher für RS 2

Inhaltsverzeichnis

Andere dji Kamerazubehör Handbücher

dji

dji Zenmuse H2-2D Bedienungsanleitung

dji

dji OSMO MOBILE 2 Bedienungsanleitung

dji

dji Ronin SC2 Bedienungsanleitung

dji

dji RONIN 2 Bedienungsanleitung

dji

dji RONIN-SC Bedienungsanleitung

dji

dji Ready Rig Quick Connector Bedienungsanleitung

dji

dji OSMO Bedienungsanleitung

dji

dji RS 3 PRO Bedienungsanleitung

dji

dji crystalsky CS785 Bedienungsanleitung

dji

dji Zenmuse X5 Bedienungsanleitung

dji

dji OSMO Bedienungsanleitung

dji

dji RONIN 2 Bedienungsanleitung

dji

dji OM 4 Bedienungsanleitung

dji

dji Zenmuse Z15 Bedienungsanleitung

dji

dji Focus Bedienungsanleitung

dji

dji OSMO MOBILE 3 Bedienungsanleitung

dji

dji mavic Bedienungsanleitung

dji

dji Ronin Bedienungsanleitung

dji

dji OM 4 Bedienungsanleitung

dji

dji DF01 Bedienungsanleitung

dji

dji RONIN TC Bedienungsanleitung

dji

dji OSMO MOBILE 2 Bedienungsanleitung

dji

dji AGRAS T30 Bedienungsanleitung

dji

dji MATRICE 30 Series Bedienungsanleitung

Beliebte Kamerazubehör Handbücher anderer Marken

Viltrox

Viltrox EF-NEX Montageanleitung

Calumet

Calumet 7100 Series CK7114 Bedienungsanleitung

Ropox

Ropox 4Single Series Bedienungsanleitung

Cambo

Cambo Wide DS Digital Series Betriebsanleitung

Samsung

Samsung SHG-120 Bedienungsanleitung

Ryobi

Ryobi BPL-1820 Bedienungsanleitung

Aegis

Aegis ABL-36020P Bedienungsanleitung

Pentax

Pentax Data Back Fc Bedienungsanleitung

Fantasea

Fantasea EyeGrabber F Series Bedienungsanleitung

Honeywell

Honeywell HDZ20HD Bedienungsanleitung

EGO

EGO BA1400T Bedienungsanleitung

Sima

Sima SRW-62 Bedienungsanleitung

Shape

Shape A7SSMKIT Bedienungsanleitung

Slide Kamera

Slide Kamera HST-2 Bedienungsanleitung

Power works

Power works 2902613 Bedienungsanleitung

SES

SES SE-2047-2 Bedienungsanleitung

Olympus

Olympus PT-EP05L Bedienungsanleitung

Starlite

Starlite OctoDome nxt Bedienungsanleitung

dji RS 2 Bedienungsanleitung

Beliebte Kamerazubehör Handbücher anderer Marken