Dji ZENMUSE X4S Bedienungsanleitung

ZENMUSE X4S

V1.2

2017.01

User Manual

Read Before the First Flight

Legends

Warning Important Hints and Tips Reference

Using this manual

Read the following documents before using the ZENMUSE™ X4S.

1.Zenmuse X4S Quick Start Guide

2.Zenmuse X4S User Manual

We recommend reading the Zenmuse X4S Quick Start Guide, especially its Disclaimer and Safety

sections, to get familiar with all parts of the Zenmuse X4S. Refer to this Zenmuse X4S User Manual

for detailed information.

Getting more information

Visit the following webpage for more information about the Zenmuse X4S.

http://www.dji.com/zenmuse-x4s

Searching for Keywords

Search for keywords such as “battery” and “install” to find a topic. If you are using Adobe

Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to

begin a search.

Navigating to a Topic

View a complete list of topics in the table of contents.

Printing this Document

This document supports high resolution printing.

Contents

Read Before the First Flight 2

Legends 2

Using this manual 2

Getting more information 2

Contents 3

Product Prole 4

Introduction 4

In the Box 4

Overview 4

Installation 5

Read the information below before setting up your Zenmuse X4S 5

Supported Devices 5

Mounting the Zenmuse X4S to the aircraft 5

Mounting the Zenmuse X4S to the Inspire 2 5

Mechanical Range 6

Using the Remote Controller 6

DJI GO 4 App 7

Downloading 7

Launching the DJI GO 4 app 7

Camera Operation 8

Touch Interface 8

Basic Shooting 8

Taking Photos 8

Recording 9

Advanced Settings 9

Exposure Mode 9

Photo Styles 9

White Balance 10

List of Settings 10

Managing your Photos and Videos 11

Playback 11

Update Firmware 12

Method 1: Using the DJI Assistant 2 12

Method 2: Using the DJI GO 4 App 12

Appendix 12

Specications 12

Product Prole

Introduction

Featuring a 1-inch CMOS sensor and large pixels measuring 2.4μm per pixel, the Zenmuse X4S

is capable of capturing 20 megapixel stills and capturing 11.6 stops of dynamic range. It can

record 4K/60 H.264 and 4K/30 H.265 videos at a 100Mbps bitrate. A variety of shooting modes are

available for a better shooting experience. 14 image Burst and AEB is available.

The Zenmuse X4S has an 8.8mm/F2.8-11 lens, which is compact with low distortion and a eld of

view of 84°.

When mounted on the INSPIRE™ 2, the 3-axis gimbal provides a stable platform for the camera to

get clear shots even during rapid maneuvering. The gimbal tilts the camera across a -130° to +40°

pitch angle and pans ± 320° in both directions. Live HD video from the camera is streamed to the

DJI GO™ 4 app.

In the Box

Check that all of the following items are in your package. If any item is missing, please contact DJI

or your local dealer.

Overview

Zenmuse X4S

Document

Quick Start Guide

Zenmuse X4S ×1

DJI Gimbal Connector2.0

Pan Motor

Tilt Motor

Lens

Camera

Roll Motor

Carrying Case ×1

Installation

Read the information below before setting up your Zenmuse X4S

Supported Devices

The Zenmuse X4S can be attached to the following device, and will be compatible with other DJI

devices in the future.

DJI Inspire 2

Mounting the Zenmuse X4S to the aircraft

Mounting the Zenmuse X4S to the Inspire 2

Power off the aircraft before installation.

1. Remove the camera body cap from the Zenmuse X4S.

2. Press the gimbal and the camera release button on the Inspire 2. Rotate to remove the

Gimbal Cap from the Inspire 2.

3. Align the white dot on the gimbal with the red dot on the Inspire 2 and insert the gimbal.

4. Rotate the Gimbal Lock to the locked position (red dots aligned).

12 34

ZENMUSE X4S User Manual

Protect the Gimbal Connector 2.0 at all times.

Always ensure that the Gimbal Connector 2.0 on the Inspire 2 is in the right position when

mounting, otherwise the camera will not mount.

DO NOT detach the Zenmuse X4S when the aircraft is powered on.

Mechanical Range

The 3-axis gimbal provides an incredibly stable and mobile platform for the camera system to

capture completely smooth images and videos. The gimbal can tilt the camera up to 170 degrees,

pan 320 degrees and roll 20 degrees in either direction.

Take off from at, open ground and protect the gimbal at all times.

Using the Remote Controller

Press the Shutter Button to capture photos or the Record Button to record videos. Adjust the

camera's tilt using the left dial. Turn the right dial to adjust camera settings.

+40°

+20°

-20°

-130°

0°

Ground Level

+320°

-320°

ZENMUSE X4S User Manual

1. Left Dial

Scroll this dial to control tilt the gimbal. Scroll this dial while pressing C1 to control yaw the

gimbal; Scroll this dia while pressing C2 to control tilt of the FPV.

2. Record Button

Press once to start video recording. Press again to stop recording.

3. Shutter Button

Press to take a photo. If burst mode is selected, the set number of photos will be taken with one

press.

4. Intelligent Flight Pause Button

Press once to exit from TapFly™, ActiveTrack™ and Advanced modes.

5. Right Dial

Press once and then scroll to set camera settings. Re-active this function after10s‘ free of

operation.

6. C2 Button

Set in DJI GO 4 app.

7. C1 Button

Set in DJI GO 4 app.

DJI GO 4 App

Downloading

Search for “DJI GO 4” in the App Store, or download at www.dji.com.

Launching the DJI GO 4 app

1. Power on the remote controller and the aircraft.

2. Connect the remote controller and your mobile device via a USB cable.

3. Launch the DJI GO 4 app after connecting, and the live HD video stream will begin.

1. Live HD Video

2. Current Camera Settings

3. Spot Metering/ Focus Switch

4. AF/MF

5. AE Lock

6. Shutter/Record Switch

7. MF Adjustment (in MF mode)

8. Shutter/Record

9. Gimbal Slider

10. Photography Congurations and

Parameter Settings

11. Playback

12. FPV(Tablets only)

09:29

P-GPS

READY TO GO (GPS)

FPV

AF/MF

ISO

SHUTTER

200 0.3 Auto

5.61/200 20:12

SD TIME

4KP30

74%

70%

4.07V

1 2 43 5

Camera Operation

Touch Interface

The touch interface can be used for capturing photos, recording videos and playback. Professional

photography congurations are also available.

Basic Shooting

Insert supported Micro SD card into the Inspire 2 to activate still capturing and video recording.

Refer to the Specications for detailed information of supported Micro SD cards.

Taking Photos

You can start capturing in the following two ways:

DJI GO 4 App: Tap the Shutter/Record Switch to select Shutter . Tap the button to take photos.

Remote Controller: Press the Shutter Button on the Remote Controller.

Single shooting is set by default. Choose from one of the shooting modes via the DJI GO 4 app.

Tap“ ”-> -> Photo

1. Multiple Mode

Take 3, 5, 7, 10, or 14 shots in a row.

ZENMUSE X4S User Manual

2. AEB (Auto Exposure Bracketing)

Take 3 or 5 bracketed frames with ±0.7EV steps for exposure compensation.

3. Timed Shot

Take photos in 2, 3, 5, 7, 10, 15, 20, 30 or 60 second intervals.

Recording

You can start recording in the following two ways:

DJI GO 4 App: Tap Shutter/Record Switch button to activate video recording mode , and then

tap the button . Tap once to start recording video, then tap again to stop recording. The recording

time length will be displayed below the Shutter/Record button.

Remote Controller: You can also press the Video Recording Button on the remote controller, which

has the same function.

Advanced Settings

Exposure Mode

Tap , to choose from the exposure modes, including: Auto, Aperture Priority(A), Shutter Priority(S)

M(Manual Exposure). By setting different EV values, a variety of exposure can be achieved in

AUTO, S and A mode. ISO values can be set in all modes. When the aircraft is in P/S/A mode, you

can choose to set the ISO automatically or manually.

1. Auto

The shutter speed and aperture are set automatically to obtain the correct exposure.

2. S(Shutter Priority)

Tap -> -> S. Set your desired shutter speed, while the camera chooses the aperture

automatically. This mode is ideal for freezing action, creating motion blur or low-light shots.

3. A(Aperture Priority)

Tap -> -> A. Set your required aperture, while the camera chooses the shutter speed

automatically. This mode provides a wider depth of field and can be used to blur out

backgrounds.

4. M(Manual Exposure)

In manual mode, set aperture, shutter speed and ISO based on actual needs.

Photo Styles

Select different styles to capture photos with different sharpnesses, contrast levels and saturation.

Tap“ ”-> ->Style.

1. Standard: A general-purpose style for most scenes.

2. Landscape: The camera will focus on as much of the scene as possible using a large depth of

eld.

3. Soft: Suitable for scenes with natural or soft colors.

4. Custom: Sharpness, contrast and saturation can be set separately.

Sharpness: The photos will be softer with lower values and clearer with higher values.

Contrast: Increasing the value will make images more dramatic.

Saturation: Colors will lighten at lower values and darken at higher values.

ZENMUSE X4S User Manual

White Balance

White balance (WB) is the process of removing unrealistic color casts. Correcting white balance

can help avoid the color casts, thereby improving photos under a wider range of lighting conditions.

White balance can be either set into a xed value or a dynamic value automatically. Tap“ ”->

->Whit Balance.

1. Auto (AWB)

The camera adjusts the white balance automatically.

2. Sunny / Cloudy / Incandescent / Neon

Choose one of these modes if natural-looking colors cannot be achieved through photo styles.

3. Custom

Set a value to compensate for a specic light source.

List of Settings

Photo

Still Photography Modes Single Shot, Multiple(3/5/7/10/14frames), AEB(3/5bracketed frames at

0.7EV bias), Timed Shot(2/3/5/7/10/15/20/30/60s)

Image Size 3:2, 4:3, 16:9

Image Format DNG,JPEG,DNG+JEPG

White Balance Auto(AWB), Sunny, Cloudy, Incandescent, Neon,

Custom(2000K~10000K)

Style Standard, Landscape, Soft, Custom (Sharpness/Contrast/ Saturation)

Color Ordinary, TrueColor, D-Cinelike, D-Log, Film Looks.

Video

Video Recording Modes

H.264

C4K: 4096×2160 23.976/24/25/29.97/47.95/50/59.94p @100Mbps

4K: 3840×2160 23.976/24/25/29.97/47.95/50/59.94p @100Mbps

2.7K: 2720×1530 23.976/24/25/29.97p @80Mbps

47.95/50/59.94p @100Mbps

FHD: 1920×1080 23.976/24/25/29.97p @60Mbps

47.95/50/59.94p @80Mbps 119.88p @100Mbps

H.265

C4K: 4096×2160 23.976/24/25/29.97p @100Mbps

4K: 3840×2160 23.976/24/25/29.97p @100Mbps

2.7K: 2720×1530 23.976/24/25/29.97p @65Mbps

47.95/50/59.94p @80Mbps

FHD: 1920×1080 23.976/24/25/29.97p @50Mbps

47.95/50/59.94p @65Mbps 119.88p @100Mbps

Video Format MP4/ MOV (H.264/ H.265)

NTSC/PAL PAL, NTSC

White Balance Auto(AWB), Sunny, Cloudy, Incandescent, Neon,

Custom(2000K~10000K)

Style Standard, Landscape, Soft, Custom (Sharpness/Contrast/ Saturation)

Andere Handbücher für ZENMUSE X4S

Inhaltsverzeichnis

Andere dji IP-Kamera Handbücher

dji

dji ZENMUSE X4S Bedienungsanleitung

Beliebte IP-Kamera Handbücher anderer Marken

FLIR

FLIR Exx series Bedienungsanleitung

Avigilon

Avigilon H4A-BO1-IR Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWCA-C128-64 Bedienungsanleitung

ShareTech

ShareTech AV1 Bedienungsanleitung

Ezviz

Ezviz C6C Bedienungsanleitung

Melchioni

Melchioni UCAM 2015 Bedienungsanleitung

Geutebruck

Geutebruck G-Cam/ESD-4630 Bedienungsanleitung

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Bedienungsanleitung

Mitel

Mitel 6800i Series Service-Handbuch

Vitek

Vitek VTC-IR403-212NP Bedienungsanleitung

THOMSON

THOMSON DSC - 323W Bedienungsanleitung

AVer

AVer FB2027 Bedienungsanleitung

ENFORCER

ENFORCER EV-T5105-N2SQ Bedienungsanleitung

Wansview

Wansview NC543 Bedienungsanleitung

Eneo

Eneo MCB-64A0003M0A Bedienungsanleitung

deView electronics

deView electronics CBDNI36F Bedienungsanleitung

Swann

Swann SwannEye Bedienungsanleitung

LevelOne

LevelOne IP CamSecure Bedienungsanleitung