dji MAVIC 2 PRO Bedienungsanleitung
V1.0
MAVIC 2
PRO
Quick Start Guide
Kurzanleitung
Guía de inicio rápido
Guide de démarrage rapide
Guida rapida
Snelstartgids
Guia de início rápido
Краткое руководство пользователя
Contents
Quick Start Guide 2
Kurzanleitung 12
Guía de inicio rápido 22
Guide de démarrage rapide 32
Guida di avvio rapido 42
Snelstartgids 52
Guia de início rápido 62
Краткое руководство пользователя 72
EN
DE
ES
FR
IT
NL
PT-PT
RU
2
EN
Aircraft
The DJITM MAVICTM 2 Pro features omnidirectional Vision Systems and Infrared Sensing
Systems*, and a fully stabilized 3-axis gimbal with a 1" CMOS sensor camera (jointly
developed by DJI and Hasselblad) that shoots 4K video and 20-megapixel photos.
DJI signature technologies such as Obstacle Sensing and Intelligent Flight Modes like
HyperLapse, ActiveTrackTM 2.0, QuickShot, Panorama, and Advanced Pilot Assistance
Systems, help you capture complex shots effortlessly. The Mavic 2 Pro boasts a maximum
ight speed of 44.7 mph (72 kph) and a maximum ight time** of 31 minutes.
13
14
19
18
16
17
15
20
1
2
3
4
56
7
8
910
11
12
1. Gimbal and Camera
2. Forward Vision System
3. Downward Vision System
4. Lateral Vision System
5. Downward Infrared
Sensing System
6. Auxiliary Bottom Light
7. microSD Card Slot
8. Front LEDs
* The Vision Systems and Infrared Sensing Systems are affected by surrounding conditions. Read the
Disclaimer and Safety Guidelines, User Manual, and watch the tutorial videos in the DJI GOTM 4 app or on the
ofcial DJI website to learn more. http://www.dji.com/mavic-2
** Maximum ight time was tested in an environment with no wind while ying at a consistent 15.5 mph (25 kph). This
value is for reference only.
9. Motors
10. Propellers
11. Antennas
12. Aircraft Status Indicator
13. Upward Infrared Sensing
System
14. Backward Vision System
15. Intelligent Flight Battery
16. Battery Level LEDs
17. Power Button
18. Battery Buckles
19. USB-C Port
20. Link Button/Linking
Status Indicator
3
EN
12 13
14 15
17
16
18
Remote Controller
Built into the remote controller is the DJI’s long-range transmission technology OCUSYNCTM 2.0,
offering a maximum transmission range of 5 mi (8 km) and displaying video from the aircraft
to the DJI GO 4 app on your mobile device at up to 1080p. An on-board LCD screen gives
real-time aircraft data information and the detachable control sticks make the remote controller
easier to store.
Maximum run time: 2 hours and 15 minutes*
1. LCD Screen
2. Flight Pause Button
3. 5D Button
4. Removable Control Sticks
5. Power Button
6. Antennas
7. RTH Button
8. Control Sticks Storage Slot
9. Reserve Video-Downlink
Port (USB)
10. Mobile Device Clamp
11. Flight Mode Switch
12. Gimbal Dial
13. Aperture/Shutter Adjustment Dial
14. Record Button
15. Focus/Shutter Button
16. Video-Downlink/Power Port
(micro USB)
17. C1 Button (Customizable)
18. C2 Button (Customizable)
Folded
* The remote controller is able to reach its maximum transmission distance (FCC) in a wide-open area
with no electromagnetic Interference at an altitude of about 400 ft (120 m).
The maximum runtime is tested in a laboratory environment. This value is for reference only.
1
3
4
6
7
2
8
9
10
11
5
4
EN
DJI GO 4 is compatible with iOS 9.0 (or later) or Android 4.4 (or later).
1. Download the DJI GO 4 App and Watching Tutorial Videos
Search “DJI GO 4” in the App Store or Google Play or scan the
QR code below to download the app on your mobile device.
Watch the tutorial videos at www.dji.com/mavic-2 or in DJI GO 4 by
tapping the icon in the top right corner of your screen.
2. Preparing the Aircraft
Remove the gimbal
cover from the camera.
Unfold the front arms. Unfold the rear arms.
Unfolded
Unfold the front arms and the propellers before the rear ones. All arms and propellers
must be unfolded before takeoff.
1
2
3
1
2
3
Press the propellers
down rmly and rotate
in the lock direction.
Match the propellers
to motors.
Marked Unmarked
Tutorial videos
DJI GO 4
5
EN
B
A
A
B
Remove the remote controller cable before charging.
3. Charging the Batteries
Use the provided charger to fully
charge the Intelligent Flight Battery
before rst use.
Remove the Intelligent Flight Battery
Charging Time:
~1 hour 30 minutes
Charging Time:
~2 hour 15 minutes
Power Outlet
100 - 240V
Low
High
Checking the Battery Levels and Powering On/O
Press once to check the battery level.
Press, then press and hold to turn on/off.
Press once to check the battery level on
the LCD screen.
Press once, then press and hold to turn on/
off the remote controller.
6
EN
1
Ensure the control sticks are rmly mounted.
The remote controller cable with the Lightning connector is mounted by default. Use the
appropriate cable for your mobile device to connect to the remote controller. When using an
iPad or tablet, use the USB port on the remote controller.
Do not use the Micro USB and the USB ports simultaneously for linking video.
4. Preparing the Remote Controller
Unfold the antennas and mobile device clamps,
then attach the control sticks.
Place one end of the RC cable to the
end of the slot.
Attach your mobile device within the clamps.
Set the antennas parallel to each other
Optimal Transmission Range
Strong
Weak
2
3
7
EN
DJI GO 4
App
6. Flight
Ready to Go (GPS)
OR
Auto Takeoff
Left stick up (slowly)
to take off
Left stick down (slowly) until you touch the
ground
Hold a few seconds to stop the motors
Auto Landing
Before taking off, make sure the Aircraft Status Bar in
DJI GO 4 displays “Ready to Go”.
Combination stick command to
start/stop the motors
Auto Takeo / Landing
Manual Takeo / Landing
The motors can only be stopped mid-ight when the ight controller detects critical
error.
5. Preparing for Takeoff
Power on the remote controller Power on the aircraft Launch DJI GO 4
Use your DJI account to activate the aircraft. Activation requires an internet connection.
Internet
8
EN
Remote Controller Operation
In DJI GO 4
Left Stick
Up
Down
Turn Left Turn Right
Right Stick
Forward
Backward
Left Right
QuickShot
TapFlyWaypoints
HyperLapseNormal
Point of Interest
ActiveTrack
Cinematic Mode
The default ight control is known as Mode 2. The left stick controls the aircraft's altitude
and heading, while the right stick controls its forward, backward, left and right movements.
The gimbal dial controls the camera's tilt.
Press the Flight Pause button for emergency braking during ight.
Watch the tutorials in DJI GO 4 or at the ofcial DJI website to learn more.
Always set an appropriate RTH altitude before takeoff. When the aircraft is returning to
the Home Point, you should guide it with the control sticks.
Andere Handbücher für MAVIC 2 PRO
4
Inhaltsverzeichnis
Sprachen:
Andere dji Quadcopter Handbücher
dji
dji Phantom 2 Vision + Bedienungsanleitung
dji
dji Inspire 1 Bedienungsanleitung
dji
dji Inspire 1 Bedienungsanleitung
dji
dji Phantom 2 Vision + Bedienungsanleitung
dji
dji Matrice 200 Series V2 Bedienungsanleitung
dji
dji Inspire 1 Bedienungsanleitung
dji
dji Phantom 2 Vision + Bedienungsanleitung
dji
dji MAVIC 2 PRO Bedienungsanleitung
dji
dji S?1000 Bedienungsanleitung
dji
dji SPARK Bedienungsanleitung
dji
dji Matrice 100 Bedienungsanleitung
dji
dji mavic Bedienungsanleitung
dji
dji Matrice M210 Bedienungsanleitung
dji
dji Phantom 3 SE Bedienungsanleitung
dji
dji LIGHTBRIDGE Bedienungsanleitung
dji
dji MAVIC AIR 2 Bedienungsanleitung
dji
dji Phantom 4 RTK Bedienungsanleitung
dji
dji Inspire 1 Pro Bedienungsanleitung
dji
dji Matrice 200 Series V2 Bedienungsanleitung
dji
dji PHANTOM 3 PROFESSIONAL Bedienungsanleitung
