Dji FOCUS CP.ZM.000238.02 Bedienungsanleitung

DJI FOCUS

Remote Controller

2015.12

V1.0

User Manual

Legend

Important Hints and Tips

Before You Begin

The following documents have been produced to help you safely operate and make full use of

your DJI Focus:

DJI Focus Remote Controller Quick Start Guide

DJI Focus Remote Controller User Manual

Check all of the included parts listed in the

In the Box

section. Read this entire User Manual

and watch the informational on the product page of DJI’s official website (http://www.dji.

com/product/focus). Read the disclaimers and warnings to understand your legal rights and

responsibilities. If you have any questions or problems during the installation, maintenance or

use of this product, please contact DJI or a DJI authorized dealer.

Searching for Keywords

Search for keywords such as “battery” and “install” to nd a topic. If you are using Adobe Acrobat

Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search.

Navigating to a Topic

View a complete list of topics in the table of contents. Click on a topic to navigate to that section.

Introduction

The DJI Focus Remote Controller is able to control the focus and aperture of the Zenmuse X5

series gimbal and camera when connected to the Inspire 1 remote controller. It features an

OLED screen and a host of control buttons.

[11] [12]

[14]

[13]

[1]

[2]

[3]

[5]

[4]

[6]

[7]

[8]

[9]

[10]

[1] Antenna

Not used when the remote controller is

connected to the Zenmuse X5.

[2] Power Button

Press and hold for 2 seconds to power

on/off the remote controller.

[3] Communication Port

Communicates with the Zenmuse X5.

[4] Marking Ring

Used to provide marking scale.

[5] Focus Wheel

Used to adjust the lens of your camera.

[6] Micro USB Port

Used to charge or update the remote

controller.

[7] Navigation Buttons

Allows you to navigate through menu items.

[8] Quick Focus Buttons

Assign focus points to buttons A, B, C

and D for quick access.

[9] OLED Screen

Displays the menu, system status and

battery level.

[10] Stiffness Control

Adjusts the stiffness of the focus wheel.

[11] System Status Indicator

Indicates the system status of the remote

controller.

[12] [13] Hard Stop Screws

Adjustable hard stops to limit the travel

range of the focus wheel.

[14] Backlight

Illuminates the marking ring from behind.

DJI FOCUS User Manual

[15] Rosette Mount

For mounting accessories.

[16] Rear Screw

Needs to be removed in order to take off

the battery cover for battery replacement.

Getting Started

Charge the Battery

The remote controller contains a 1700 mAh battery that can power the device for up to 14 hours.

Charge the battery through the Micro USB port located on the side and check the battery level

on the OLED screen.

To replace the battery, remove the screw and battery cover on the back of the remote controller.

Screw

Micro USB Port

[17] Lanyard Hole

Used to attach the neck strap.

[18] Link Button

Used to enter forced update mode.

[16]

[15]

[17]

[18]

Only use ofcial DJI batteries that can be purchased on www.dji.com. DJI takes no

responsibility for any damage to your devices caused by non-DJI batteries.

Never use swollen, leaky, or damaged batteries. If your batteries show any abnormal

signs in performance, contact DJI or a DJI authorized dealer for assistance.

Never disassemble or pierce the battery in any way, or else the battery may leak, catch

re, or explode.

DO NOT attach the batteries to wall outlets or car charger sockets directly, and always

use a DJI approved adapter. DJI takes no responsibility if the battery is charged using

a third party charger.

Attaching the Neck Strap

Pull down and hold the button on the neck strap connector, slide it through the mounting hole on

the bottom of the remote controller, and then release the button.

Ensure that the Zenmuse X5 camera lens is set to AF mode.

In the DJI GO app, ensure the shooting mode is set to 'M' (manual) or 'A' (aperture

priority).

Connection

To allow communication between the two devices, connect the communication port on the

Focus remote controller to the CAN Bus port on the Inspire 1 remote controller using the

dedicated CAN Bus cable.

DJI FOCUS User Manual

System Status Indicator

The system status indicator is a white LED that is located on the remote controller.

Remote Controller Description

Solid light RC is connected to the Zenmuse X5 and functioning normally.

/ Forced update.

Blinks quickly

(4 times per second) RC is disconnected from the Zenmuse X5. / RC is charging.

Settings

The Focus remote controller will display the following information when it is connected to the

Inspire 1 Pro or Raw system.

[1] Battery Level

[2] Focus Wheel Travel Percentage

[3] Focus Wheel Travel Bar

[4] Main Menu

[5] Connection Status

50.0%

[1]

[2]

[3]

[4]

[5]

Zenmuse X5 Settings

Aperture: Enable or disable aperture control.

Direction: The lens motor’s direction of rotation – normal or reversed.

Default: Restore the default lens motor parameters.

Settings

Power Off: Idle time before the remote controller auto-powers off-10 min, 30 min, 60 min or never.

Endpoints: The upper and lower travel limits of the focus wheel. Turn the focus wheel to the

desired upper travel limit and select Set Point 1. Then, turn the focus wheel to the desired lower

travel limit and select Set Point 2. Turning the focus wheel from Point 1 to Point 2 will rotate the

camera focus by a full cycle.

LED Control: Enable or disable the LED and system status indicators on the remote controller.

Default: Restores the default settings for the remote controller.

About: Displays the current rmware version of the remote controller.

DJI FOCUS User Manual

Quick Focus

Allows rapid switching between four preset focus points.

Assigning a Focus Point

Adjust the lens focus to the desired focus point by turning the focus wheel. Hold down one of

the letters until it blinks to store the focus point. To reassign a focus point, press and hold the

letter to discard its value, and then redo the rst step.

Switching to a Focus Point

Press one of the letters to apply its assigned focus point. The OLED screen will display the

active Quick Focus letter. The selected letter will light up and the remaining letters will blink

rapidly. Press the active letter again to exit Quick Focus.

After selecting a Quick Focus button, you can ne tune the focus by turning the focus

wheel without changing its assigned value.

There are mechanical limits on both the focus wheel and lens motor. If the lens does

not respond to the focus wheel, check if the lens has reached its mechanical limit.

Aperture Control

Once aperture control is enabled, the 'D' button is used to switch between focus control and

aperture control.

To switch from focus control to aperture control, press the 'D' button and then follow the

instructions in the DJI GO app to operate the focus wheel.

The remote controller overrides the in-app controls. You will not be able to adjust the

focus , zoom or aperture in the DJI GO app.

Locking the Remote Controller

The remote controller can be locked to avoid unintentional operations. All controls except the

power button and OK button are disabled in the locked state.

DJI FOCUS User Manual

50.0%

Focus Wheel Settings

Setting Mechanical Limits

The two adjustable hard stop screws around the focus wheel can be used to limit the travel

range physically.

1. Loosen the hard stop screws, slide them to the desired positions and tighten.

2. The travel range of the focus wheel is now limited to the distance between the two hard stop

screws.

50.0%

To lock the remote controller, press and hold the OK button until a lock icon appears on the

OLED screen. Repeat this procedure to unlock the remote controller.

DJI FOCUS User Manual

Adjusting the Stiffness

Turn the control knob at the center while holding the focus wheel to adjust the stiffness of the

wheel. Adjust the focus wheel until it reaches a stiffness or looseness that feels comfortable.

50.0%

Firmware Update

The DJI Focus rmware can be updated through the DJI PC/MAC Assistant.

Installing the DJI PC/MAC Assistant

Windows

1. Download the DJI WIN DRIVER INSTALLER and Assistant from the DJI Focus product page

on DJI.com.

2. Double click the Assistant installer and follow the steps to nish the installation. Then, launch

the Assistant.

The Assistant installer can be used on Windows XP (32 or 64 bit) or above.

Mac OS X

1. Download the Assistant installer (.DMG) from DJI.com, and then run the installer and follow

the prompts to nish the installation.

2. When launching for the rst time, if using Launchpad to run the Assistant, Launchpad will

block access because Assistant has not been reviewed by the App Store. Locate the

Gimbal icon using the Finder, press Control, then click the icon (or right-click the icon using

a mouse). Choose Open from the shortcut menu, then click Open in the dialog box to launch

the program.

3. After the first successful launch, double click the Gimbal icon, as usual, to launch the

program using the Finder or Launchpad.

The DMG installer supports Mac OS X 10.9 or above.

DJI FOCUS User Manual

Upgrade

You can view the latest rmware versions of all components on this page.

Upgrading the Remote Controller

Turn on the controller and connect it to your computer via the Micro-USB cable and wait until the

indicator LED in the Assistant blinks blue. Click Upgrade to upgrade the Follow Focus Remote,

and then upgrade the Follow Focus Remote Radio.

Forced Upgrade

Use Forced Upgrade if the remote controller rmware upgrade fails. To initiate Forced Upgrade,

power on the remote controller while holding down the link button.

Ensure your PC is connected to the Internet.

Close any antivirus programs and network rewalls.

Ensure that the controller is powered on during the upgrade.

Do not disconnect the USB cable during the upgrade.

Inhaltsverzeichnis

Andere dji Fernbedienung Handbücher

dji

dji OSMO ACTION Bedienungsanleitung

dji

dji DT7 Bedienungsanleitung

dji

dji RC Plus Bedienungsanleitung

dji

dji Focus Bedienungsanleitung

dji

dji Cendence Bedienungsanleitung

dji

dji SPARK REMOTE CONTROLLER C2 Bedienungsanleitung

dji

dji SPARK REMOTE CONTROLLER C2 Bedienungsanleitung

dji

dji RC Motion 2 Bedienungsanleitung

dji

dji FPV Remote Controller 2 Bedienungsanleitung

dji

dji PVT581 Bedienungsanleitung

dji

dji Focus Bedienungsanleitung

dji

dji RC Motion 2 Bedienungsanleitung

dji

dji A3 Bedienungsanleitung

dji

dji Smart Controller Enterprise Bedienungsanleitung

dji

dji Focus Bedienungsanleitung

dji

dji Smart Controller Bedienungsanleitung

dji

dji LIGHTBRIDGE Bedienungsanleitung

dji

dji A3 Bedienungsanleitung

dji

dji Cendence Bedienungsanleitung

dji

dji RC Pro Bedienungsanleitung

dji

dji DT7 Bedienungsanleitung

dji

dji RC Bedienungsanleitung

dji

dji Matrice600 Series Bedienungsanleitung

dji

dji FPV AIR UNIT Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung

Invacare

Invacare G91S Bedienungsanleitung

JR Racing

JR Racing XR2 Bedienungsanleitung

Philips

Philips SBCRU130/00U Bedienungsanleitung

Philips

Philips Prestigo SRT9320 Bedienungsanleitung

Vicon

Vicon VNCTRL-1 Bedienungsanleitung

dji FOCUS CP.ZM.000238.02 Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken