Dji RC Motion 2 Bedienungsanleitung

User Manual

2023.03v1.0

DJI RC Motion 2

Searching for Keywords

Search for keywords such as “battery” and “install” to find a topic. If you are

using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows or

Command+F on Mac to begin a search.

Navigating to a Topic

View a complete list of topics in the table of contents. Click on a topic to navigate to

that section.

Printing this Document

This document supports high resolution printing.

Using this Manual

Legend

Important Hints and Tips

Before Flight

It is recommended to watch all tutorial videos and read the in-box document before using

for the first time. Prepare for your first flight by referring to this user manual for more

information.

• 5.8 GHz is not supported in some regions. This frequency band will automatically

be disabled when the aircraft is activated or connected to the DJI™ Fly app in

these regions. Observe local laws and regulations.

Video Tutorials

https://www.dji.com/rc-motion-2/video

Download the DJI Fly App

https://www.dji.com/rc-motion-2/downloads

Download DJI Assistant 2 (Consumer Drones Series)

https://www.dji.com/rc-motion-2/downloads

Table of Content

Using this Manual 3

Legend 3

Before Flight 3

Video Tutorials 3

Download the DJI Fly App 3

Download DJI Assistant 2 (Consumer Drones Series) 3

Overview 5

Using the Motion Controller 7

Powering on/off 7

Linking 8

Activation 9

Controlling the Camera 9

Controlling the Aircraft 10

Motion Control 13

Motion Controller Alert 14

Motion Controller Calibration 14

Firmware Update 15

Appendix 16

Specifications 16

Aftersales Information 16

DJI RC Motion 2 User Manual

Overview

1. Battery Level LEDs

2. Lock Button

Takeoff: press twice to start the aircraft motors, then press and hold to make the

aircraft take off. The aircraft will ascend to approximately 1.2 m and hover.

Landing: while the aircraft is hovering, press and hold to land the aircraft and stop the

motors.

Brake: press once to make the aircraft brake and hover in place. Press again to unlock

the attitude.

When the aircraft is performing RTH or auto landing, press the button once to cancel

RTH or landing.

3. Joystick

Toggle up or down to make the aircraft ascend or descend. Toggle left or right to make

the aircraft move horizontally left or right.

4. Mode Button

Press to switch between Normal and Sport mode. Press and hold to initiate RTH. Press

again to cancel RTH.

5. FN Dial

Press the dial to open the camera settings panel in the FPV view. Scroll the dial to

navigate the settings menu or adjust the parameter value, then press the dial to

confirm the selection. Press and hold the dial to exit the current menu.

Use the FN dial to control the camera tilt before takeoff or during RTH and landing.

Press and hold the FN dial from the FPV view and then scroll up or down to tilt the

camera. Release the dial to stop the camera tilt.

DJI RC Motion 2 User Manual

6. Shutter/Record Button

Press once: take a photo or start/stop recording.

Press and hold: switch between the photo and video modes.

7. Accelerator

Press to fly the aircraft in the direction of the circle in the goggles. Push forward to fly

the aircraft backward. Apply more pressure to accelerate. Release to stop and hover.

8. USB-C Port

9. Power Button/Link Button

Press the power button once to check the current battery level.

Press, and then press and hold to power the motion controller on or off.

When powered on, press and hold the power button to initiate linking.‘

10. Lanyard Hole

DJI RC Motion 2 User Manual

Using the Motion Controller

Powering on/off

Press the power button once to check the current battery level.

Press, and then press and hold the power button to power the motion controller on or

off.

The battery level LEDs display the power level of the battery during charging and

discharging. The statuses of the LEDs are defined below:

LED is on.

LED is flashing.

LED is off.

LEDs Battery Level

81%-100%

76%-80%

64%-75%

51%-63%

26%-50%

16%-25%

9%-15%

1%-8%

Power Button

Battery Level LEDs

DJI RC Motion 2 User Manual

5V, 2A

If the battery level is low, it is recommended to use a charger that supports 5 V, 2 A output

to charge the device.

• Make sure that the default output voltage of the charger is 5 V. Excessive voltage

will damage the device.

The table below shows the battery level LED statuses during charging.

LEDs Battery Level

1%-50%

51%-75%

76%-99%

100%

Linking

Preparation before linking:

1. Power on the aircraft, goggles, and motion controller.

2. Open the goggles menu. Select Status and make sure that the aircraft model displayed

at the top of the menu is correct. Otherwise, select Switch from the upper right corner

of the menu and then select the correct aircraft.

3. Make sure the aircraft is linked with the goggles.

Link the aircraft with the motion controller:

5s 5s

DJI RC Motion 2 User Manual

1 Press and hold the power button on the aircraft until the battery level LEDs start to

blink in sequence.

2 Press and hold the power button on the motion controller until the controller beeps

continually and the battery level LEDs blink in sequence.

3 The motion controller stops beeping once linking is successful, and both the aircraft

and motion controller battery level LEDs turn solid and display the battery level.

• The aircraft can be controlled with only one remote control device during flight. If

your aircraft has been linked with multiple remote control devices, turn off other

control devices before flight.

Activation

When all devices are powered on and linked, connect

the USB-C port of the goggles to the mobile device

and run the DJI Fly app. The app will automatically

identify the DJI RC Motion 2 and activate it in silent

mode.

Activate the device as soon as possible after

purchase to avoid affecting the after-sales service.

Controlling the Camera

Shutter/Record Button

FN Dial

Adjusting the camera parameters: press the dial to open the camera settings panel from

the FPV view of the goggles. Scroll the dial to navigate the settings menu or adjust the

parameter value, then press the dial to confirm the selection. Press and hold the dial to

exit the current menu.

DJI Fly

App

DJI RC Motion 2 User Manual

Controlling the camera tilt: before takeoff or during RTH and landing, press and hold the

dial from the FPV view and then scroll up or down to tilt the camera. Release the dial to

stop the camera tilt.

Shutter/Record Button

Press and hold to switch between the photo and video modes. Press once to take a photo

or to start or stop recording.

Controlling the Aircraft

• To ensure flight safety when controlling the aircraft with the motion controller,

press the lock button once to make the aircraft brake and hover before operating

the goggles. Failure to do so is a safety risk and may lead to the aircraft losing

control.

Mode Button

The motion controller has two modes: Normal mode and Sport mode. Normal mode is

selected by default. Press the mode button to switch between Normal and Sport mode.

Press and hold to initiate RTH. Press again to cancel RTH.

Lock Button

Use the lock button to control the takeoff, landing, and brake of the aircraft:

Takeoff: press twice to start the aircraft motors, then press and hold to make the aircraft

take off. The aircraft will ascend to approximately 1.2 m and hover.

Landing: press and hold the lock button while the aircraft is hovering to land and stop the

motors automatically.

Brake: during flight, press once to brake the aircraft and make it hover in place with the

attitude locked. Press again to unlock the attitude and resume the flight control.

When the aircraft is performing RTH or auto landing, press the button once to cancel RTH

or landing.

Lock Button

Joystick

Mode Button

Accelerator

Andere Handbücher für RC Motion 2

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere dji Fernbedienung Handbücher

dji

dji RC Plus Bedienungsanleitung

dji

dji Cendence Bedienungsanleitung

dji

dji RC Pro Bedienungsanleitung

dji

dji Smart Controller Enterprise Bedienungsanleitung

dji

dji RC Bedienungsanleitung

dji

dji A3 Bedienungsanleitung

dji

dji Focus Bedienungsanleitung

dji

dji FPV Remote Controller 2 Bedienungsanleitung

dji

dji FOCUS CP.ZM.000238.02 Bedienungsanleitung

dji

dji DT7 Bedienungsanleitung

dji

dji PVT581 Bedienungsanleitung

dji

dji Focus Bedienungsanleitung

dji

dji FPV AIR UNIT Bedienungsanleitung

dji

dji OSMO ACTION Bedienungsanleitung

dji

dji A3 Bedienungsanleitung

dji

dji Matrice600 Series Bedienungsanleitung

dji

dji SPARK REMOTE CONTROLLER C2 Bedienungsanleitung

dji

dji Focus Bedienungsanleitung

dji

dji SPARK REMOTE CONTROLLER C2 Bedienungsanleitung

dji

dji RC Motion 2 Bedienungsanleitung

dji

dji Smart Controller Bedienungsanleitung

dji

dji DT7 Bedienungsanleitung

dji

dji LIGHTBRIDGE Bedienungsanleitung

dji

dji Cendence Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung

Invacare

Invacare G91S Bedienungsanleitung

JR Racing

JR Racing XR2 Bedienungsanleitung

Philips

Philips SBCRU130/00U Bedienungsanleitung

Philips

Philips Prestigo SRT9320 Bedienungsanleitung

Vicon

Vicon VNCTRL-1 Bedienungsanleitung