Dock Doctors Paddle Products Beach Dolly Bedienungsanleitung

Beach Dolly with sling & keel pad

Assembly Instructions

PART NAME QTY

A. AXLE......................................... 1

with tongue bracket and sling supports attached

B. SLING SUPPORT BAR ................. 2

C. TONGUE.................................... 1

D. TONGUE TBRACKET.................. 1

E. HANDLEBAR.............................. 1

with bow pad and handle attached

F. HANDLE.................................... 1

G. WHEEL ..................................... 2

H. SLING BRACKET......................... 2

with sling attached

I. SLING........................................ 1

J. KEEL PAD .................................. 1

K. BOW PAD .................................. 1

L. END CAP ................................... 3

Toll Free: 1-800-870-6756 | info@thedockdoctors.com | www.thedockdoctors.com 1

GIJK

Beach Dolly with sling & keel pad

Step 1: Attach sling support bars to axle:

Lay the axle on its side as shown below.

Take the (2) sling support bars and slide two brass nuts into the channel.

Slide the sling support bar into the sleeve on the axle, then guide the brass nuts into place using the allen wrench. Line the

brass nuts up with the holes in the sleeve.

Insert (2) allen bolts (with washers attached) into the holes, aligning them with the brass nuts underneath.

Hand tighten, then tighten

with the provided allen

wrench.

Repeat with the other sling

support bar.

Step 1

Parts Needed Quantity

Axle 1

Sling Support Bars 2

Brass Nuts 4

Washers 4

Allen Bolts 4

Toll Free: 1-800-870-6756 | info@thedockdoctors.com | www.thedockdoctors.com 2

sling support bar will slide into sleeve here

axle

Beach Dolly with sling & keel pad

Step 2: Attach tongue to axle t-bracket:

Slide two brass nuts into the channel on the tongue, then turn the tongue over, and

slide two more brass nuts into the channel on the back side of the tongue.

Slide the tongue into the t-bracket on the axle. Guide the brass nuts into place using the allen wrench.

Line the brass nuts up with the holes in the sleeve.

Insert (2) allen bolts (with washers attached) into the

holes, aligning them with the brass nuts underneath.

Hand tighten, then tighten with the provided allen

wrench.

Flip the axle/tongue assembly over and repeat for the

other (2) brass nuts on the other side.

Step 2

Parts Needed Quantity

Tongue 1

Axle from Step 1 1

Brass Nuts 4

Washers 4

Allen Bolts 4

Toll Free: 1-800-870-6756 | info@thedockdoctors.com | www.thedockdoctors.com 3

Beach Dolly with sling & keel pad

Step 3: Attach wheels to axle:

Slide (1) wheel washer onto the end of the axle.

Then, slide (1) wheel onto the end of the axle.

Insert one locking pin into the hole on the end of the axle to secure the wheel in place.

Step 3

Parts Needed Quantity

Wheel 2

Axle from Step 1 1

Wheel Washer 2

Locking Pin 2

Toll Free: 1-800-870-6756 | info@thedockdoctors.com | www.thedockdoctors.com 4

Beach Dolly with sling & keel pad

Step 4: Attach Keel Pad:

Slide the keel pad onto the tongue. Slide it about 12” from the end of the tongue.

Tighten the allen bolt on the end of the keel pad bracket.

Step 5: Attach Handlebar:

Slide the bracket on the handlebar onto the tongue. Tighten the allen bolts on the

side of the bracket on the handlebar.

Step 4

Parts Needed Quantity

Keel Pad with bracket 1

tighten allen bolts to secure handlebar to tongue

Step 5

Parts Needed Quantity

Handlebar 1

with handle attached

Toll Free: 1-800-870-6756 | info@thedockdoctors.com | www.thedockdoctors.com 5

Beach Dolly with sling & keel pad

Step 6: Attach End Cap on Tongue:

Attach (1) of the plastic end caps onto the end of the tongue. (Do not use the other (2)

end caps yet, you will install them in Step 9).

Step 7: Attach Sling:

Unroll the sling as shown below, making sure the webbing strap is not twisted.

NOTE: The allen bolts on the sling bracket should face the

front of the dolly when installed on the sling support bars.

Step 6

Parts Needed Quantity

End Cap 1

Step 7

Parts Needed Quantity

Sling brackets 2

with sling attached

allen bolts on sling bracket need to face

toward the front of the dolly

➞

allen bolt on sling bracket

Toll Free: 1-800-870-6756 | info@thedockdoctors.com | www.thedockdoctors.com 6

Beach Dolly with sling & keel pad

Step 8: Attach Sling (continued):

Slide one bracket on the end of the sling onto the sling support bar, making sure the allen bolt on the sling bracket

faces the front of the dolly. Slide the bracket on the other end of the sling onto the other sling support bar.

Step 9: Install End Caps:

Install the remaining (2) end caps onto the end of the sling support bars.

Step 10: Tighten Sling Brackets:

After installing the end caps, raise the sling bracket up to the height of

the end cap, then tighten the allen bolt on the side of the sling brackets,

using the allen wrench.

allen bolts on sling bracket need to face toward the front of the dolly

Toll Free: 1-800-870-6756 | info@thedockdoctors.com | www.thedockdoctors.com 7

Inhaltsverzeichnis

Andere Dock Doctors Bootsausrüstung Handbücher

Dock Doctors

Dock Doctors SLIDING BOARDING STEP Bedienungsanleitung

Beliebte Bootsausrüstung Handbücher anderer Marken

Ideal Windlass

Ideal Windlass CWM Leitfaden

Access

Access BIMINI Bedienungsanleitung

Floe

Floe VSD 6000 Bedienungsanleitung

Faun

Faun C40 Trackway Bedienungsanleitung

Exalto

Exalto 240BS Bedienungsanleitung

Hobie

Hobie Mirage 360 Bedienungsanleitung

Dowco

Dowco V322 CC - 2019 Bedienungsanleitung

Humphree

Humphree HCS-5 Bedienungsanleitung

Vetus

Vetus BOW4512D Technisches Datenblatt

Mastervolt

Mastervolt Mass Combi 12/2000-100 Original Betriebsanleitung

Zattini Group

Zattini Group bamar BOXTRON E14S Benutzerhandbuch

SeaView

SeaView PM5-FMD-8 Bedienungsanleitung

Vetus

Vetus HTANK Bedienungsanleitung

Grammer

Grammer AVENTO MSG 65/511 Betriebsanleitung

Furuno

Furuno TZTL12F Bedienungsanleitung

Harken

Harken 944 Bedienungsanleitung

ShoreLand'r

ShoreLand'r DUB 2314 Bedienungsanleitung

ProFurl

ProFurl C480 Bedienungsanleitung