Dometic SKYSOL Programmierhandbuch

SKYSOL

Assembly & Installation Instructions

Parts List

HerculesFrame Large

Assembly Instructions for at packed blinds

Double ended blinds (addition notes for single ended blinds on page 2)

1. Unpack blind and Check

contents against list

Contents

4 Corner brackets

4 mitre corners

8 Grub screws

4 Frame sections

1 Blind and or Fly Assembly

Tools required:

2mm Allen Key

2. Layout frame sections and align dots

4. Place frame on foam packing tube supplied as shown

Flyscreen assembly ready to install at open end of frame, note handle underneath

5. Feed blind into frame evenly ensuring gliders engage and cords are not

trapped

3. Assemble corners as shown to one end only, ensure prole is tight to

mitre corner.

Page 1

10. Fit Flyscreen fabric headrail if applicable as per steps 9a & b,

a. Rest headrail on clips

b. Press into place from underneath avoiding damage

to fabric.

Page 2

9. Fit night fabric headrail to clips in frame using steps

a& bbelow.

8. Fit remaining frame corners as per step 4.

7. Position fabric in center of frame and check all gliders are engaged by pushing from below

(handle side), the bars should not lift.

6. Engage moving rail gliders into frame, again ensuring cords are not trapped.

Repeat steps 5 & 6 for second fabric if applicable.

Page 3

Single ended 2 fabric assembly, both night and y fabrics

are connected by a central moving rail, note square

guides. Feed central moving rail guides into frame as

shown.

Fitting single ended 2 fabric assembly

Follow steps 1 to 4 and note the following for step 5 (feeding gliders in to frame)

Continue with steps 6 to 9 and note the following for step 10

Fitting opposite headrail for single ended assemblies

as per steps 9a & b.

Troubleshooting

Blind does not operate:

•Ensure blind is installed as per instructions provided

•Check cords are not trapped and gliders are correctly located, see step 6.

•Ensure frame tracks are free from debris

Fabric sags or there is a loss of tension:

• Check spring in headrail

Headrail detached or loose

•Check tting clips ( 9 a & b)

Test blind operation of blind by fully closing and opening,

Unpacking pre assembled blinds

•Please read instructions before unpacking.

•Lay on a at, dry surface, avoid twisting the blind unit.

•Remove all protective packaging, taking care not to damage cords, blind or metal work.

•Ensure that the product is not damaged.

•Measure the blind unit and make sure that it ts the recess (the blind unit should be 4mm smaller overall for an easy t).

•Make sure that the recess is square, if not; it will force the blind out of shape when xing.

11. Test blind operation of blind by fully closing and opening. In the unlikely of any problems,

please follow troubleshooting on page 3.

•If a large frame, ensure a minimum of two people undertake the installation.

•Ensure that the blind unit is the correct way up with the handle facing downwards an in the correct orientation.

•Offer the blind unit up to the recess and ensure that all the sides are square, use packing pieces if necessary. (g1)

•Make sure that the blind unit is not twisted; distortion will damage the blind and affect operation.

•Use suitable screws to x the frame to the recess, using pre-drilled holes (the head of screw to be no larger than 6.0 mm in

diameter and no more than 2.0 mm in height). If using a countersunk screw, countersink the frame holes to suit.

Before installation

Note the full Job ID found on the packaging label for future correspondence.

Headlining

g 1

Frame

Packing

90°

Recess

Care and maintenance

•Minimal maintenance is required. Do not grease, oil or lubricate the blind unit, lubricants will damage the fabric.

•If blind gets wet, deploy blind and allow to dry naturally.

Recommended use

•Blind to be stowed when roof is open over 5 Knots

Safety

•This blind is not designed as a walking surface.

g 2

Page 4

Sub ush xing point

Installation

Support

•Please visit www.webasto.com or contact Webasto directly quoting the Job ID (found on either the blind’s documentation,

packing label or inspection label located on the back of the headrail).

•For spares please see exploded parts list below.

CUSTOMER NAME

Support

•Please visit www.oceanair.co.uk or contact Oceanair directly quoting the Job ID (found on either the blind’s documentation,

packing label or inspection label located on the back of the headrail).

•For spares please see exploded parts list below.

Exploded Parts List

Item

Description Qty

1 M3 Nut 8

2 M3 x 5mm grub screw 8

3Headrail endcap 2

4Clip 6

5Headrail 2

6Cover strip 2

7 Grommet 48

8Slide plate 16

9 M4 x 10mm pan head

Pozi-Drive screw

10 Grommet (tab removed) 12

Item

Description Qty

11 M3 x 8mm grub screw 12

12 Rivet 4

13 Connect rail 12

14 Moving rail end cap 4

15 Cross bar 2

16 Handle 2

17 Corner bracket 4

18 Frame mitre 4

19 M4 x 4mm grub screw 8

20 Mounting prole 4

21 Plate 8

Item

Description Qty

22 Spring 0.7mm 8

23 Magnetic strip 2

24 Tape strip 1

25 End cap insert 8

26 Glider spacer 12

27 Moving rail glider 4

28 M4 x 4mm pan head

Pozi-Drive screw

29 Inspection Label 1

120 22

216

2428 26

52418 711

914 15

238

16 13

Page 5

Double ended blind shown

Page 6

Notes

Dometic UK Blind Systems Ltd

Atlantic House, 1 Ellis Square, Selsey, Chichester PO20 0AY United Kingdom.

Tel: +44 1243 606909 Fax: +44 1243 608300 www.dometic.com

Registered Ofce

Atlantic House, 1 Ellis Square, Selsey, Chichester PO20 0AY

Registered in England No. 2504633

A member of the British Marine Federation © Dometic UK Blind Systems Ltd 2013 Part No. 700000264 Rev 4 ECN 11642 March 2014

Part No. 700000232 Rev 3 ECN 11642 March 2014

Andere Handbücher für SKYSOL

Inhaltsverzeichnis

Andere Dometic Jalousie Handbücher

Dometic

Dometic Oceanair Rollerblind Powered Bedienungsanleitung

Dometic

Dometic DB1R Bedienungsanleitung

Dometic

Dometic SKYSOL AB Bedienungsanleitung

Dometic

Dometic Rollerblind Precision BR38 Bedienungsanleitung

Dometic

Dometic SKYSOL Bedienungsanleitung

Dometic

Dometic Oceanair SKYSCREEN Bedienungsanleitung

Dometic

Dometic FP200 Bedienungsanleitung

Dometic

Dometic Oceanair Romanblind Bedienungsanleitung

Dometic

Dometic Rastrollo 2000 Bedienungsanleitung

Dometic

Dometic SKYSCREEN 2 Bedienungsanleitung

Dometic

Dometic ROLLERBLIND CHAIN Bedienungsanleitung

Dometic

Dometic SKYSOL 2 Bedienungsanleitung

Dometic

Dometic FP200 Bedienungsanleitung

Dometic

Dometic Rastrollo 3000 Bedienungsanleitung

Dometic

Dometic FR 400 Bedienungsanleitung

Dometic

Dometic FR 400 Bedienungsanleitung

Dometic

Dometic SKYSOL CLASSIC Bedienungsanleitung

Dometic

Dometic Oceanair Romanblind Bedienungsanleitung

Dometic

Dometic 1302 Bedienungsanleitung

Dometic

Dometic SKYVENETIAN Betriebsanleitung

Dometic

Dometic SKYSOL Oceanair Track Small 9600023478 Bedienungsanleitung

Dometic

Dometic Oceanair Skysol Frame Manual Bedienungsanleitung

Dometic

Dometic Oceanair Skyvenetian Bedienungsanleitung

Dometic

Dometic DB3H Bedienungsanleitung

Beliebte Jalousie Handbücher anderer Marken

Jysk

Jysk ROGEN Bedienungsanleitung

SOMFY

SOMFY 1241752 Bedienungsanleitung

Rollos

Rollos S-Nanorollo V2 Planungshandbuch

Teptron

Teptron Move Bedienungsanleitung

Renson

Renson Outdoor Loggia Sicherheitsleitfaden

Project Source

Project Source CDLF2342W Bedienungsanleitung

Domondo

Domondo PureNight Installationsanleitung

rollease acmeda

rollease acmeda Easy Spring Air Einrichtungshandbuch

IKEA

IKEA KADRILJ Bedienungsanleitung

Hallis Hudson

Hallis Hudson Rolls Super glide Bedienungsanleitung

Benthin

Benthin P1614 Bedienungsanleitung

MV LINE

MV LINE CLARA 015 Bedienungsanleitung

Current

Current E-WAND Leitfaden

weinor

weinor VertiTex ZipR Handbuch

Roto

Roto ZAR M R4/R7 Bedienungsanleitung

SOMFY

SOMFY Movelite WT Series Bedienungsanleitung

Acmeda

Acmeda RF400 Series Bedienungsanleitung

Motura

Motura Pli_353/3 Bedienungsanleitung