Doro Ip700wifi Bedienungsanleitung

English

1 LED

2 Head set socket

3 Volume Up / Down

4 Left function key

5 Call key

6 Charger socket

7 Navigation key

8 Right function key

9 Power / End key

Display indicators

10 Signal strength

11 Ringer signal: mute

12 Ring mode: vibration

13 Missed call

14 Call forward

15 Key locked

16 Battery indicator

17 Function key area

10 11

1413

English

Please note!

Before initial use the batteries must be charged for 4

hours.

Important!

Never use the charger if the plug is damaged.

Switching the phone on/off

Press and hold Lfor a few seconds to

switch the phone on or off.

Functions of the keys

The left and right function keys are, together

with the navigation key, essential when

handling the phone and its menu structure.

The left function key is generally used for

conrmation of choices, saving a chosen

setting or to get deeper into the menu system.

The right function key is instead used to return

to the previous, higher level in the menu

system or to delete or cancel an incorrect entry.

Another way of returning to the previous,

higher menu level is to use L.

The navigation key is used to scroll in the

option lists of the menu or to move the

marker. This is done by pressing the upper or

lower part of the key. In some cases it is also

applicable to press the left or right part of the

navigation key to change a specic setting.

Typing is done with the number keys: 1 to 9. 0

is used to create space and to switch input

method.

Area of use

The product is intended for indoor usage. It

should not be exposed to extremely high or low

temperatures. The product is not resistant to

moisture or careless treatment.

Please note!

Do not attempt to disassemble or repair the product.

Installing the battery

When removing the battery, make sure that the

phone is switched off.

Slide the battery release button upwards and lift

the battery off the phone.

When installing the battery, slide the release button

upwards.

Align the metal contacts on the battery with the

contacts inside the battery compartment.

Press the battery downwards until it ts into the

battery compartment, then release the the battery

release button.

Charging

Connect the charger to an electrical wall socket and

to the charger socket of the phone.

The LED light will turn orange. When charging is

complete 3(approximately 2 hours) the LED

light will turn green. Fully-charged batteries will last

for approximately 40 hours in stand-by or 2 hours

operational. Battery consumption is depending on

the network and SIP-server conditions.

English

To communicate

To make a call, enter the phone number and press

q. (Press the right function key to delete an

incorrect entry.)

To answer an incoming call press q. To end or

reject a call press L.

Note!

It is also possible to make a call in “Speed dial”. Press

and hold the key number corresponding the phone number

to be called.

For more information on “Speed Dial” refer to “Main

menu > Call Features”.

Key lock

Press followed by the left function keyfollowed by the left function key

to lock keypad.

Press followed by the left function key to

unlock keypad.

Hold call

Press the right function key;to hold a call.

Press the right function key to4resume a call.

Main menu

Press the left function key to access the main

menu.

Scroll through the menu by using the navigation

key.

Main menu > Phone Book

When Phone Book is active, press the left

function key to accept.

Phone Book > Add Contact

Press the left function key to reach the Phone

Book option list.

Move the marker so that Add Contact is

activated.

Press the left function key to conrm.

Enter the name and scroll to the number eld

by using the navigation key.

Enter the number.

When editing is completed, save the entry by

pressing the left function key.

Phone Book > Edit Contact / Delete

Contact / Delete All

Select required contact.

Press left function key and select option: Edit

Contact / Delete Contact / Delete All.

Phone Book > Making a call

Move the marker to select which contact to call.

Press q

If more than one number, scroll to the right one

by using the navigation key.

Conrm the choice by pressing q.

English

Call Features > Speed Dial

The Speed Dial function enables the user to

connect a specic phone number to the number

keys: 1 to 9.

Call Features > Call Waiting

Call Waiting alerts the user on that there is

someone trying to call. The duration of the Call

Waiting time is adjustable.

Call Features > Direct IP

When making a call, Direct IP can be used instead

of entering a telephone number.

Note!

The function is only available when “STUN“ is set to

“None”.

Main menu > Phone Conguration

It is possible to customize the phone in several

ways.

When Phone Conf. is active, press the left

function key to accept.

Phone Conguration > Audio

Use the navigation key to move the marker to

Audio.

Press the left function key to reach the Audio

option list.

Move the marker to select audio option: Voice

Codec, Jitter Buffer, VAD or DTMF Gen.

Press the left function key to conrm the

selection.

Main menu > Call History

This function contains information on missed,

received or dialled calls.

When Call History is active, press the left

function key to select list: Missed Calls,

Received Calls or Dialed Calls.

Scroll in the list by using the navigation key.

Press the left function key to select what type of

information to be displayed.

Scroll in the listed Call History by using the

navigation key.

Pressing the left function key when a number is

marked will offer several possibilities: Save as

new, Add to contact, View Details, Remove and

Remove All.

Main menu > Call Features

The call features include: Call Forward, Speed

Dial, Call Waiting and Direct IP.

When the marker is on Call Features, press the

left function key to accept.

Scroll in the list by using the navigation key.

Press the left function key to adjust the settings

for the selected call feature.

Call Features > Call Forward

It is possible to forward the incoming calls to a

specic phone number. Forwarding can be set

to all calls, when the line is busy or when there is

no answer.

English

Phone Conguration > Ringer

The menu item Ringer makes it possible to select

a special ringtone, volume and/or vibration for

incoming calls.

Move the marker to Ringer by using the

navigation key.

Press the left function key to reach the

Ringer option list. The selectable options are:

Ringtone, Volume and Vibration.

Phone Conguration > Date/Time

settings

There are several possibilities for setting the

phone’s time, date, time format etc.

Note!

Adjustment of the “Date/Time settings” is only possible if

“NTP” is disabled.

Move the marker to Date/Time by using the

navigation key.

Press the left function key.

Move the marker to NTP by using the

navigation key.

Press the left function key to conrm.

Move the marker to NTP enable by using

navigation key.

Press the left function key. The phone will

automatically update the time from the NTP

server. If needed, change the NTP server

address.

To select a specic time zone:

Move the marker to Time zone in the

Date/Time settings option list by using the

navigation key.

Press the left function key.

Scroll the marker to select time zone by using

the navigation key.

Press the left function key to conrm.

Phone Conguration > Theme

The theme function makes it possible to change

the colour of the screen.

Move the marker to Theme by using the

navigation key.

Press the left function key.

Scroll with the navigation key to select a theme.

Press the left function key to conrm the

selection.

Phone Conguration > Language

Choose the displayed language of the phone as

follows:

Move the marker to Language by using the

navigation key.

Press the left function key.

Scroll with the navigation key to select a

language.

Press the left function key to conrm.

English

WLAN Conguration

Auto WLAN Conguration

(Admin Conguration > Others)

Follow procedure below to make an automatic

search for available access points:

Make sure the marker is on Others and press

the left function key.

Move the marker to Site Survey by using the

navigation key.

Press the left function key to conrm the search.

Scroll in the list of found access points by using

the navigation key.

Press the left function key to select.

If needed, enter the WEP/WLAN key. The phone

will now connect to the chosen WLAN access point.

Press the left function key to save the setting.

Manual WLAN Conguration

(Admin Conguration > WLAN Conf)

It is also possible to make a manual WLAN

conguration. It is then rst necessary to adjust

the settings:

Make sure the marker is on WLAN Conf and

press the left function key.

Move the marker to 1. by using the navigation key.

Press the left function key to conrm.

Scroll to Edit, by using the navigation key and

press the left function key.

Main menu > Admin Conguration

The menu item Admin Conguration is where to

setup the wireless network related parameters.

When the marker is on Admin Conf, press the

left function key to accept.

Enter the default password "1111" to get access.

Scroll in the list by using the navigation key.

Admin Conguration > Others

Move the marker to Others and press the left

function key.

Scroll through the list by using the navigation

key.

The list includes following options: Site Survey,

Factory Reset (Password=2468), MAC Address,

FW Upgrade and Serial No.

To upgrade the telephone:

Scroll to FW Upgrade and press the left

function key.

Move the marker to Upgrade and press the left

function key to conrm. The device will reboot

after 5 minutes.

Default HTTP server is: http://www.doro.com

/downloads/ip700wi/upgrade/

Important!

Do not unplug the charger, remove the battery or switch the

telephone off while upgrading.

English

To edit the name of the WLAN access point:

Scroll to SSID by using the navigation key.

Press the left function key to edit or enter the

new name.

Press the left function key to save.

To set the encryption of the WLAN access

point:

Scroll to Encryption by using the navigation

key.

Press the left function key to conrm.

Scroll to Mode by using the navigation key.

Press the left function key.

Scroll with the navigation key to select between

None, WEP and WPA Personal.

Press the left function key to conrm the

selection.

If WEP is selected:

Scroll to WEP Keys by using the navigation key.

Press the left function key.

Scroll to WEP Key 1 by using the navigation key.

Press the left function key.

Enter the WEP key/password and save by

pressing the left function key.

Scroll to WEP Bits by using the navigation key.

Press the left function key.

Move the marker to 64 or 128 bits with the

navigation key.

Press the left function key to conrm the

selection.

If WPA Personal is selected:

Scroll to WPA Personal by using the navigation

key.

Press the left function key.

Press the left function key once again to enter

Passphrase.

Type a password and press the left function key

to save the current setting.

Finalize the WLAN access point settings by

selecting whether to set a xed or dynamic IP

address:

Scroll to TCP/IP by using the navigation key.

Press the left function key.

Press the left function key once again to enter

DHCP Conf.

Select Enable or Disable by using the

navigation key.

Press the left function key to activate or

deactivate the DHCP function.

If DHCP is disabled, scroll to Static IP by using

the navigation key.

Press the left function key to perform IP

settings.

Note!

“Static IP” is ONLY available when the “DHCP”

function is disabled.

English

Admin Conguration > STUN Conf

Make sure the marker is on STUN Conf and

press the left function key.

Activate the STUN function:

Scroll to Enable by using the navigation key.

Press the left function key.

Scroll with the navigation key to select between

Yes or None.

Press the left function key to conrm.

Enter the STUN server address:

Scroll to STUN Server by using the navigation

key.

Press the left function key and enter the STUN

server address.

Press the left function key to save.

Enter the STUN server port:

Scroll to STUN Svr Port by using the navigation

key.

Press the left function key and enter the STUN

server port.

Press the left function key to save.

Web interface

Each phone has, in addition, a web interface to

access most conguration settings.

Use a web-browser to connect to the web-

interface of the phone.

Type the phone's IP address in the address eld

and press Enter.

There are two log in options:

When the WLAN access point settings are

nished:

Scroll to Current Conf in the WLAN Conf menu

and press the left function key.

Scroll to the desired access point and press the

left function key.

Admin Conguration > User Conf

To adjust the SIP account settings:

Make sure the marker is on User Conf and press

the left function key.

Scroll to Prof 1. by using the navigation key.

Press the left function key to edit Prole Name

(issued landline number), Username (name of

the phone's user), Password (security code),

Display Name (displayed name), Domain

(SIP server address), Registrar (server

registrar address), Registrar Port (server port),

Outbound Proxy (user outbound proxy) and/or

Ob. Proxy Port (user outbound proxy port).

Move to the selected parameter by using the

navigation key and press the left function key.

Enter the data and save by pressing the left

function key.

English

The User Conguration Page gives the user options for

setting the functions Call Forward, Call Waiting, Speed

Dial, Audio, Ringer and Time/Date.

Administration Conguration Page, gives the

user options for setting the congurations of the

phone, like for example the interface.

Please note!

The “Administration Conguration Page” is password

protected. The username is “admin” and the default

password is set to “1111”. The password can be changed.

Troubleshooting

There are some problems that might be

encountered when using the phone. It might be

needed to contact the network service provider

but often the problems are easily corrected.

Checklist

If the phone cannot be switched on:

Press andholdthepowerkey for morethan2seconds.

Check the battery status. Charge it if needed.

Check that the battery is properly installed.

If it is not possible to make calls:

Ensure that the phone's Wi-Fi settings are correct.

Move closer to the access point for better signal

strength.

If the battery cannot be charged:

Check that the phone and charger is correctly

connected.

Check that the battery is properly installed.

If the WLAN search did not nd the desired

access point:

Enable the SSID (System Set Identier)

broadcasting of the access point.

Make sure that the phone is within range of the

access point.

Note!

If it is necessary to hand in the phone, make sure to copy

all information stored in the phone as data might be lost

during a reparation.

Declaration of conformity

Doro declares that the apparatus Doro ip700wi

complies with the essential requirements and

other relevant positions of Directive 1999/5/EC

(R&TTE), 2002/95/EC (RoHS). A copy of the

Declaration of Conformity can be found at www.

doro.com/dofc

Guarantee

This product is guaranteed for a period of 12 months from the

date of purchase. Proof of purchase is required for any service or

support required during the guarantee period. This guarantee

shall not apply to a fault caused by an accident or a similar

incident or damage, liquid ingress, negligence, abnormal usage,

not reasonably maintained or any other circumstances on the

purchaser’s part. Furthermore, this guarantee shall not apply to a

faults caused by the use of poor quality batteries, battery leakage,

corrosion or similar events related to non DORO batteries. This

guarantee does not in any way affect your statutory rights.

Inhaltsverzeichnis

Sprachen:

Andere Doro Handy Handbücher

Doro

Doro 8062 Bedienungsanleitung

Doro

Doro Primo 413 Bedienungsanleitung

Doro

Doro Primo 305 Bedienungsanleitung

Doro

Doro 1361 Bedienungsanleitung

Doro

Doro 7030 Bedienungsanleitung

Doro

Doro 8200 Bedienungsanleitung

Doro

Doro 8031 Bedienungsanleitung

Doro

Doro 7070 Bedienungsanleitung

Doro

Doro HANDLEPLUS 326I GSM Bedienungsanleitung

Doro

Doro 7080 DFC-0310 Bedienungsanleitung

Doro

Doro 8080 Bedienungsanleitung

Doro

Doro 6060 Bedienungsanleitung

Doro

Doro 6520 Bedienungsanleitung

Doro

Doro 8042 Bedienungsanleitung

Doro

Doro PHONEEASY 410GSM Bedienungsanleitung

Doro

Doro PHONEEASY 332GSM Bedienungsanleitung

Doro

Doro Primo 305 Bedienungsanleitung

Doro

Doro 730X Bedienungsanleitung

Doro

Doro HandleEasy 328gsm Bedienungsanleitung

Doro

Doro Secure 580IUP Bedienungsanleitung

Doro

Doro 824 Bedienungsanleitung

Doro

Doro 5860 Bedienungsanleitung

Doro

Doro 225IPC Bedienungsanleitung

Doro

Doro 6526 Bedienungsanleitung

Beliebte Handy Handbücher anderer Marken

Zte

Zte BLADE A520 Bedienungsanleitung

Nokia

Nokia Lumia 620 Bedienungsanleitung

Blackbe;rry

Blackbe;rry KEYone Bedienungsanleitung

Bea-fon

Bea-fon X5 Premium Bedienungsanleitung

Blackbe;rry

Blackbe;rry 8707 Series Bedienungsanleitung

Blackbe;rry

Blackbe;rry Storm Betriebsanleitung

LG LM-X420QN Bedienungsanleitung

LifeWatch

LifeWatch V Bedienungsanleitung

Bea-fon

Bea-fon SILVER LINE SL860 Bedienungsanleitung

IKI Mobile

IKI Mobile KF4.5i Bedienungsanleitung

Hitech

Hitech HT-850 Bedienungsanleitung

Yezz

Yezz Fashion F10 Bedienungsanleitung

Point Mobile

Point Mobile PM60 Bedienungsanleitung

Blackbe;rry

Blackbe;rry Q10 Bedienungsanleitung

Blackbe;rry

Blackbe;rry Bold 9900 Bedienungsanleitung

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 Bedienungsanleitung

LG LM-K420EMW Bedienungsanleitung

ISAFE MOBILE

ISAFE MOBILE IS655.2 Bedienungsanleitung

Doro ip700wifi Bedienungsanleitung

Beliebte Handy Handbücher anderer Marken