Doro AUB 200 Bedienungsanleitung

doro AUB 200

1 Wall mounting hanger hook

2 Headset socket

3 Handset socket

4 Store/Mute button and LED

5 Recall button

6 Memory button

7 Redial button

8 Pause button

9 Headset button and LED

10 Hold button and LED

11 Handset/Headset volume control

12 One-Touch memories

13 Ring/Message Wait Indicator

14 Input socket for additional

equipment

English (see page EN 1-8)

!"# $%&

*+, -./'()

456 789:0123

English

Important!

The earpiece of the handset may attract small ferromagnetic objects such as staples and pins, care should

be taken when placing the handset near these items.

Connection

1. Connect the curly cord to the handset and the socket marked Q. Then connect the

telephone cord to the socket marked ton the telephone and then to the telephone

network socket.

2. Lift the handset and listen for the dial tone. Your telephone is now operational.

Hearing Aid compatible

This telephone is hearing aid compatible. Select T mode on the hearing aid to enable

coupling.

Connection of headset

An additional headset can be connected to the socket on the side of the telephone

marked =.

To access an incoming call or dial press =, to terminate a call press =again.

The LED next to the headset button will illuminate when activated.

Please note!

DORO original headsets are tested and adapted for this telephone. Other types and makes of headsets

may be used, though the function and sound quality can not be guaranteed.

Any damage occurring due to incompatible or non Doro headsets being installed, will not be covered

under the telephone guarantee.

Connection of additional equipment

On the right side of the telephone there is a socket marked 8. This is used for

connecting additional telephone equipment to the same telephone line, e.g. a wireless

telephone, modem, etc.

Labels/protective cover

The memory index cover can be accessed by carefully removing the transparent plastic

using a small at blade screwdriver or similar.

Wall mounting

The telephone can be wall mounted using an optional wall mount bracket.

The wall mount bracket is available as an accessory, part number WB200/300 in white

or black.

1. Fix the wall mount bracket on the back of the telephone.

2. Secure two screws, vertically positioned 83 mm apart.

3. The screws should locate into the two keyholes on the wall mount bracket.

4. Activate the hanging peg (located by the hook switch) by lifting it upwards and

rotating it 180 degrees.

English

Volume control

The volume level in the earpiece can be increased or decreased using the volume

control knob on the side of the telephone.

Mute button

The microphone can be turned off/on during a call by pressing MUTE.

Redial button

If the number dialled is engaged or if the last number dialled is to be redialled, lift the

receiver or press the headset button =and press the REDIAL button.

On Hold

Press the HOLD button to place a call on hold. The LED next to the button will

illuminate. The call can be resumed by pressing the HOLD button again or from

another telephone connected to the same line.

Recall

Press the RECALL button followed by the extension number to transfer calls when

connected to a PBX. Access to additional network services can be gained by using the

RECALL button, *and #keys. Contact your network operator for more information.

Select either TIME/EARTH recall using the switch located on the underside of the

unit.

Memory

The telephone will store 3 one-touch(M1-M3) and 10 two-touch memories (up to 21

digits). When a number is stored, you need only press one or two buttons to make a call.

Storing One-touch Memories

1. Lift the handset and press p(ignore anything you hear in the earpiece).

2. Press desired location M1-M3.

3. Enter the phone number. Press pand replace the handset.

Dialing using One-touch Memories

Lift the handset and press desired location M1-M3.

Storing Two-touch Memories

1. Lift the handset and press p(ignore anything you hear in the earpiece).

2. Press MEMORY.

3. Press desired location 0-9.

4. Enter the phone number. Press pand replace the handset.

Dialing using Two-touch Memories

1. Lift the handset and press MEMORY.

2. Press desired location 0-9.

If you need to insert a pause in the telephone number press REDIAL.

If you need to change a number, store the new number in the same location as the old one.

English

Ringer

1. Lift the receiver (ignore the dialling tone) and press the store button Pand #.

2. Select ring signal by pressing the number keys 0-9in accordance with the table

below.

3. Press store button Pand replace the receiver. The ring signal is now set.

Melody type Key/level

Melody A ......................... 1=Low, 2=Normal, 3=High

Melody B ......................... 4=Low, 5=Normal, 6=High

Melody C.........................7=Low, 8=Normal, 9=High

Off*..................................0

* If the key 0 is selected, the ring signal will be turned off until the next time the receiver is lifted. After

that, the ring signal will revert to the previous setting.

Technical information

Some selector switches are located in a compartment on the underside of the telephone.

These switches control technical parameters for connection to PBX equipment.

IMPORTANT NOTE: These switches should only be adjusted by qualied personnel.

Recall time

Selection of 100/300/600ms timed loop break for recall functionality.

The standard setting is 100 ms for UK/Australia and 600 ms for New Zealand.

EARTH/TIME (UK only)

Selection of either earth or timed loop break recall method.

Tone/Pulse

Selection of either dialling method depending on PBX.

Message Waiting Indicator

Some PBX systems have a function called Message Waiting.

The switch is located behind the battery cover on the underside of the telephone.

The MW function operates differently depending on the PBX in question. Please

contact the system controller for more information. The following four alternatives are

available: +, -, ringer indicator ( ) and high DC voltage (HV). When the telephone is

used in systems without a telephone exchange ( ) should be selected.

English

Declaration of conformity

Doro hereby declares that this product, Doro AUB 200, conforms with the essential

requirements and other relevant regulations contained in the Directive 1999/5/EC,

2002/95/EC. A copy of the manufacturer’s declaration is available at www.doro.com/

dofc

Troubleshooting

Check that the telephone cord is undamaged and properly plugged in.

Disconnect any additional equipment that may be connected.

If the problem is resolved the fault is with the other equipment.

Test the equipment on a known working line. If the product works, then the fault is

probably with your line. If you are still experiencing difculties, contact the place of

purchase.

If you cannot resolve the fault using the faultnder section, technical support is

available by email on tech@doro-uk.com or via a premium rate telephone

number: 0905 895 0854, calls cost 50 pence per minute (prices correct at the

time of publication). Further contact details are available on our website:

www.doro-uk.com

Alternatively you can write to:

Customer Services

Doro UK Ltd

1 High Street

Chalfont St Peter

Buckinghamshire

SL9 9QE

Guarantee

This product is guaranteed for a period of 10 years from the date of purchase. Proof of

purchase is required for any service or support required during the guarantee period.

This guarantee shall not apply to a fault caused by an accident or a similar incident or

damage, liquid ingress, negligence, abnormal usage, not reasonably maintained or any

other circumstances on the purchaser’s part. Furthermore, this guarantee shall not

apply to a fault caused by a thunderstorm or any other voltage uctuations.

This guarantee does not in any way affect your statutory rights. (As a matter of

precaution, we recommend disconnecting the telephone during a thunderstorm.)

English

Version 1.0

Inhaltsverzeichnis

Andere Doro Telefon Handbücher

Doro

Doro 514C Bedienungsanleitung

Doro

Doro HEARPLUS 313CI Bedienungsanleitung

Doro

Doro PhoneEasy 311 Bedienungsanleitung

Doro

Doro HEARPLUS 313CI Bedienungsanleitung

Doro

Doro MemoryPlus 319i ph Bedienungsanleitung

Doro

Doro Arc 7 Bedienungsanleitung

Doro

Doro PhoneEasy 312cs Bedienungsanleitung

Doro

Doro PhoneEasy 311C Bedienungsanleitung

Doro

Doro TEL 8 PLUS Bedienungsanleitung

Doro

Doro PhoneEasy 311C Bedienungsanleitung

Doro

Doro PhoneEasy 337ip Bedienungsanleitung

Doro

Doro MATRA 25 Bedienungsanleitung

Doro

Doro 915c Syntiro Bedienungsanleitung

Doro

Doro CARE Bedienungsanleitung

Doro

Doro CONGRESS 305 Bedienungsanleitung

Doro

Doro PHONEEASY RECORD 327CR Bedienungsanleitung

Doro

Doro HANDLEPLUS 326I GSM Bedienungsanleitung

Doro

Doro Audioline AL505 Bedienungsanleitung

Doro

Doro AFTI 45 Bedienungsanleitung

Doro

Doro Arc 6 Bedienungsanleitung

Doro

Doro 916CR Bedienungsanleitung

Doro

Doro COMFORT 3000 Bedienungsanleitung

Doro

Doro PhoneEasy 311C Bedienungsanleitung

Doro

Doro 909c Bedienungsanleitung

Beliebte Telefon Handbücher anderer Marken

GE 2-9480 Bedienungsanleitung

Geemarc

Geemarc PHOTOPHONE 155 Bedienungsanleitung

D-Link

D-Link DWR-720/PW Bedienungsanleitung

Interquartz

Interquartz Gemini IQ333 Bedienungsanleitung

SSS Siedle

SSS Siedle HT 840-0 Bedienungsanleitung

Motorola

Motorola TITANIUM Bedienungsanleitung

Panasonic

Panasonic ICX Bedienungsanleitung

LG H870DS Bedienungsanleitung

Samsung

Samsung GT-I9500 Bedienungsanleitung

AT&T

AT&T Trimline 205 Bedienungsanleitung

Selta

Selta zenyth 600 Bedienungsanleitung

UNIQCELL

UNIQCELL A1 Bedienungsanleitung

Panasonic

Panasonic KX Series Bedienungsanleitung

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Bedienungsanleitung

BT Decor 425 Bedienungsanleitung

NEC

NEC SV8500 Bedienungsanleitung

Teledex

Teledex PEARL Bedienungsanleitung

Ericsson

Ericsson Dialog 3213 Bedienungsanleitung