DPA D:sign 4097 CORE Bedienungsanleitung

Installation guide

dpamicrophones.com/4097

4097 CORE Supercardioid Choir Mic

What’s inside the box?

Top

Swivel joint

Vertical pole

Floor base

Adapter holder

XLR adapter

Active boom pole

Cable

4. Add the swivel joint

Assemble the swivel joint, but do not tighten it just yet. Pull it

down the vertical pole to a suitable height.

Quick assembly guide

1. Connect the vertical pole to the ﬂoor base

Take one of the two identical sections of the vertical pole and

screw it onto the ﬂoor base.

2. Add the adapter holder

Pull adapter holder down to the middle of the pole and attach

the XLR adapter or wireless transmitter. (See 7.)

1 2

3. Assemble the vertical pole

Bottom

Top

Add the two additional sections to complete the vertical pole.

Leave out the middle section for a shorter pole.

5. Add the cable

6. Connect the cable

1. Pull the female side of the cable up through the hole in the

swivel joint.

2. Ax it inside the boom holder.

3. Then loosen the swivel joint and lead the cable down through

the cable run.

Connect the cable to the active boom pole and adjust as need-

ed. Excess cable can be stored near the adapter holder near the

base.

1 2

3

Near the base, the adapter holder stores either a standard

MicroDot to XLR adapter or a wireless transmitter. Any

transmitter type in our adapter program can be used.

7. Wired and wireless

6. Attach the Active Boom Pole

Clip the boom pole ﬁrmly into the holder. You should hear it

click. You can now adjust the position of the boom as needed.

Speciﬁcations

20

Hz 50 100 200

500

1 kHz 2510 20 40

dB

10

-10

-20

-30

0

0

°

30

°

60

°

90

°

180

°

Frequency response

Measured at 20 cm (7.9 in)

16 kHz

8 kHz

4 kHz

2 kHz

1 kHz

500 Hz

250 Hz

0º

5dB

Polar pattern

Directional characteristics

Supercardioid

Frequency range

20 Hz - 20 kHz

Frequency range, ±2 dB, 20 cm (7.9 in)

80 Hz - 15 kHz with 2 dB soft boost at 10 - 12 kHz

Second order low-cut filter at 80 Hz with DAD4099

Sensitivity, nominal ±3 dB at 1 kHz

16 mV/Pa; -36 dB re. 1 V/Pa

Equivalent noise level, A-weighted

Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))

S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL)

71 dB

Total harmonic distortion (THD)

< 1% up to 133 dB SPL peak

Dynamic range

Typ. 110 dB

Max. SPL, peak before clipping

135 dB

Connector

MicroDot (XLR via supplied DAD4099 adapter)

Color

Black

Dimensions

Total weight: 5.5 kg (180 oz)

Floor base weight: 4.1 kg (155 oz)

Maximum total height: 253.3 cm (99.7 in)

Application guide

Learn more about miking a choir at:

dpamicrophones.com/mic-university/how-to-mic-a-choir

DPI-4097-M-01

Service & repair

If you are not satisﬁed with the characteristics exhibited by this product, please go to

dpamicrophones.com/service for instructions.

Warranty

d:sign™ 4097 CORE Supercardioid Choir Mic is covered by a two-year limited warranty.

CE marking

This product conforms to all relevant directives approved by the European Commission.

dpamicrophones.com/4097

Inhaltsverzeichnis

Beliebte Mikrofon Handbücher anderer Marken

IK Multimedia

IK Multimedia iRig Stream MIC PRO Bedienungsanleitung

DAPAudio

DAPAudio RM-101 Bedienungsanleitung

AKG

AKG CHM 21 Bedienungsanleitung

Sennheiser

Sennheiser evolution wireless series EM 100 Bedienungsanleitung

Sony

Sony C-48 Bedienungsanleitung

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG Bedienungsanleitung

Shure

Shure WH30TQG Bedienungsanleitung

auna PRO

auna PRO MIC-900 Bedienungsanleitung

AKG

AKG D 3800 Bedienungsanleitung

Shure

Shure KSM141 Bedienungsanleitung

MAIIN SOUND

MAIIN SOUND IIN style Bedienungsanleitung

Earthworks

Earthworks TC25 Bedienungsanleitung

Sennheiser

Sennheiser evolution D1 Bedienungsanleitung

Alesis

Alesis MicLink Wireless Bedienungsanleitung

DSPPA

DSPPA D6234 Bedienungsanleitung

Monacor

Monacor IMG STAGELINE ECM-300B Bedienungsanleitung

Ansr Audio

Ansr Audio Scan16 Bedienungsanleitung

Shure

Shure MXA710 Series Bedienungsanleitung