4
HOW TO ASSEMBLE MANUAL BREAST PUMP
WASH YOUR HANDS THOROUGHLY.
1. Make sure that the silicone breast shield is perfectly seated on the ller.
2. Make sure the silicon valve xed into the ller, covering all the ller.
IMPORTANT: DO NOT LOSE THE VALVE. YOUR PUMP WILL NOT WORK WITHOUT IT
OR IF IT IS FITTED INCORRECTLY.
3. Fix to the ller/pump assembly to the bottle and screw tightly.
4. Fix the main pump body connecting to the ller and screw so it locks into place.
5. Insert the bottle into the base.
6. At last, set the breast shield lid onto the silicone breast shield.
BATTERY
• Fix two AA batteries according to the Instruction shows «+» «-» in the battery box
appropriately.
• In case the power is not enough for use, please have two more spare batteries each
time you use the product.
• If you don’t use the product for some period, please make sure to take out the batteries,
or damage maybe caused to the breast pump.
HOW TO USE:
1. Clean all the parts of breast pump, using the steam sterilizer, wash your hand and
assemble all the parts properly, tightened to avoid leakage.
2. Before start sucking milk, gently massage the breast or use a warm towel to compress
the breast, which is helpful for extracting breast milk.
3. Sit on a chair relaxed, and tilt your body forward slightly.
4. Turn the suction adjusting knob to the «MIN» setting.
5. Press the silicone breast shield to the breast tightly.
6. Please adjust the suction adjusting knob, feel of the suction, turn to «MIN», suction
become weak; turn to «MAX», suction become powerful. Mom adjusts the suction
according to their needs.
