Draco K476-8U Bedienungsanleitung

IHSE GmbH
Maybachstrasse 11
88094 Oberteuringen
Germany
www.ihse.de
Tel. +49 7546-9248-0
Fax +49 7546-9248-48
User Manual
Edition: 2014-04-15
Draco
U-Switch
Model:
K476-4U
K476-8U
K476-4U2

Draco U-Switch
2 2014-04-15
Copyright
© 2014. All rights reserved. This information may not be reproduced in any
manner without the prior written consent of the manufacturer.
Information in this document is subject to change without notice.
Trademarks
All trademark and trade names mentioned in this document are
acknowledged to be the property of their respective owners.
Disclaimer
While every precaution has been taken during preparation of this manual,
the manufacturer assumes no liability for errors or omissions. Neither does
the manufacturer assume any liability for damages resulting from the use
of the information contained herein.
The manufacturer reserves the right to change specifications, functions, or
circuitry of the product without notice.
The manufacturer cannot accept liability for damage due to misuse of the
product or due to any other circumstances outside the manufacturer’s
control (whether environmental or installation related). The manufacturer
shall not be liable for any loss, damage, or injury arising directly, indirectly,
incidentally, or consequently from the use of this product.

Contents
2014-04-15 3
Contents
1 About This Manual ....................................................................... 5
1.1 Scope.................................................................................. 5
1.2 Validity ................................................................................ 5
1.3 Cautions and Notes ............................................................ 5
2 Safety Instructions....................................................................... 6
3 Description ................................................................................... 7
3.1 Application .......................................................................... 7
3.2 System Overview ................................................................ 8
3.3 Product Range .................................................................... 9
3.4 Upgrade Kits ....................................................................... 9
3.5 Accessories......................................................................... 9
3.6 Device Views .................................................................... 10
3.6.1 Model K476-4U ................................................... 10
3.6.2 Model K476-8U ................................................... 11
3.6.3 Model K476-4U2 ................................................. 12
3.7 Status LEDs ...................................................................... 14
4 Installation .................................................................................. 16
4.1 Package Contents............................................................. 16
4.2 System Setup.................................................................... 16
4.3 Example Applications........................................................ 17
5 Configuration.............................................................................. 19
5.1 Command Mode ............................................................... 19
5.2 External Display (optional) ................................................ 21
5.3 External Control (optional) ................................................ 21
6 Operation .................................................................................... 22
6.1 Switching a Source ........................................................... 22
6.1.1 Switching via Keyboard....................................... 22
6.1.2 Switching via Mouse (Panning)........................... 22
6.1.3 External Switching (optional)............................... 23

Draco U-Switch
4 2014-04-15
7 Specifications............................................................................. 24
7.1 Interfaces .......................................................................... 24
7.1.1 USB-HID ............................................................. 24
7.1.2 RJ10 / 4P4C........................................................ 25
7.2 Supported Peripherals ...................................................... 25
7.2.1 USB-HID Devices ............................................... 25
7.3 Connector Pinouts ............................................................ 26
7.4 Power Supply.................................................................... 27
7.5 Environmental Conditions ................................................. 27
7.6 Size................................................................................... 27
7.7 Shipping Weight................................................................ 27
7.8 MTBF ................................................................................ 28
8 Troubleshooting......................................................................... 29
8.1 USB-HID ........................................................................... 29
9 Technical Support ...................................................................... 30
9.1 Support Checklist.............................................................. 30
9.2 Shipping Checklist ............................................................ 30
10 Certificates.................................................................................. 31
10.1 CE Declaration Of Conformity........................................... 31
10.2 North American Regulatory Compliance........................... 32
10.3 WEEE ............................................................................... 32
10.4 RoHS/RoHS 2................................................................... 32
11 Glossary...................................................................................... 33
Pos: 1 /806-IHSE/ Zu diesem Handbuch/A TB_Zu diesem Handbuch @ 5\mod_1278 573163276_6.doc @ 41510 @ 1222 @ 1

About This Manual
2014-04-15 5
1 About This Manual
1.1 Scope
This manual describes how to install your U-Switch, how to operate it and
how to perform trouble shooting.
1.2 Validity
This manual is valid for all devices listed on the front page. The product
code is printed on the base of the devices.
1.3 Cautions and Notes
The following symbols are used in this manual:
This symbol indicates an important operating instruction that should be
followed to avoid any potential damage to hardware or property, loss of
data, or personal injury.
This symbol indicates important information to help you make the best use
of this product.
This symbol indicates best practice information to show recommended
and optimal ways to use this product in an efficient way.
Pos: 2 /806-IHSE/ Sicherheitshinweis e/ATB_Sicherheits hinweise @ 5\mod_12785 73321245_6.doc @ 41528 @ 1 @ 1

Draco U-Switch
6 2014-04-15
2 Safety Instructions
To ensure reliable and safe long-term operation of your U-Switch please
note the following guidelines:
Installation
Only use in dry, indoor environments.
The U-Switch and the power supply units can get warm. Do not
situate them in an enclosed space without any airflow.
Do not place the power supply directly on top of the device.
Do not obscure ventilation holes.
Only use power supplies originally supplied with the product or
manufacturer-approved replacements. Do not use a power supply if it
appears to be defective or has a damaged chassis.
Connect all power supplies to grounded outlets. In each case, ensure
that the ground connection is maintained from the outlet socket
through to the power supply's AC power input.
Do not connect the link interface to any other equipment, particularly
network or telecommunications equipment.
Take any required ESD precautions.
In order to disconnect the device completely from the electric circuit, all
power cables have to be removed.
Repair
Do not attempt to open or repair a power supply unit.
Do not attempt to open or repair the U-Switch. There are no user
serviceable parts inside.
Please contact your dealer or manufacturer if there is a fault.
Pos: 3 /806-IHSE/ Beschreibung/UEB_Besc hreibung @ 5\mod_1278 573379151_6.doc @ 41546 @ 1 @ 1

Description
2014-04-15 7
3 Description
Pos: 4 /806-IHSE/ Beschreibung/Ver wendungszweck/476- xx@ 5\ mod_1278943539292_ 6.doc @ 43333 @ @ 1
3.1 Application
The U-Switch is used to handle several sources (computer, CPU, KVM
Extender CON Units) and several monitors with one keyboard and mouse
set only.
The U-Switch is especially suitable for use with KVM switches and KVM
extenders of the Draco family.
Pos: 5 /806-IHSE/ Beschreibung/Syst em-Übersicht /476- xx@ 5\ mod_1278944383855_ 6.doc @ 43352 @ @ 1

Draco U-Switch
8 2014-04-15
3.2 System Overview
The U-Switch is connected to the sources (computer, CPU, KVM extender
CON Units) by using the included cables.
Keyboard and mouse are also connected to the device.
12 3
1 Sources (computer, CPU, KVM Extender CON Units)
2 U-Switch
3 Keyboard, mouse
See Chapter 4.3, Page 17 for installation examples.
Pos: 6 /806-IHSE/ Beschreibung/Gerä tetypen/476-xx @ 5\mod_1 278944566980_6.doc @ 43371 @ 2 @ 1

Description
2014-04-15 9
3.3 Product Range
Model Description
K476-4U U-Switch 4 Port
K476-8U U-Switch 8 Port
K476-4U2 U-Switch for parallel switching of 2x4 ports
Pos: 7 /806-IHSE/ Beschreibung/Einb auoptionen/476- xx@ 5\m od_1278944769042_6.doc @ 43389 @ @ 1
3.4 Upgrade Kits
Model Description
455-8G 19"/1U rack mount kit to mount up to 2 devices
455-1K Mounting plate to mount by screws
455-2K Mounting plate to mount by snap on
Pos: 8 /806-IHSE/ Beschreibung/Zubehör /476-xx @ 5\mod_1278944 953839_6.doc @ 43407 @ 2 @ 1
3.5 Accessories
Model Description
260-5U International power supply unit 100...240VAC / 5VDC / 4 A
Pos: 9 /806-IHSE/ Beschreibung/Gerä teansichten/UEB_Ger äteansichten @ 5\mod_127 8573737808_6.doc @ 41654 @ 2 @ 1

Draco U-Switch
10 2014-04-15
3.6 Device Views
Pos: 10 /806-IHSE/ Beschreibung/Gerä teansichten/476- xx/Typ K476-4U @ 5\mod_12 78946137542_6.doc @ 43430 @ @1
3.6.1 Model K476-4U
12345 6 7 8 9 10 11 12
Rear View
1 Connect to RJ10 / 4P4C (Port 1)
2 To CPU 1: USB-HID
3 Connect to RJ10 / 4P4C (Port 2)
4 To CPU 2: USB-HID
5 Connect to RJ10 / 4P4C (Port 3)
6 To CPU 3: USB-HID
7 Connect to RJ10 / 4P4C (Port 4)
8 To CPU 4: USB-HID
9 Connect to USB-HID devices 1
10 Connect to USB-HID devices 2
11 Service port
12 Connect to 5VDC power supply
Pos: 11 /806-IHSE/ Beschreibung/Gerä teansichten/476- xx/Typ K476-8U @ 5\mod_12 78946184120_6.doc @ 43448 @ @1
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Beliebte Netzwerk-Router Handbücher anderer Marken

NETGEAR
NETGEAR FS526T - Switch Bedienungsanleitung

Korenix
Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic
Automated Logic ZN551 Betriebsanleitung

Cisco
Cisco ASR 1000 Series Bedienerhandbuch

EnGenius
EnGenius ESR-9710 Bedienungsanleitung

Cisco
Cisco 805 Series Bedienungs- und Sicherheitshinweise











