Draper Profile+ Bedienungsanleitung

Proﬁle+Permanently Tensioned Projection Screen

Assembly & Mounting Instructions

Proﬁle Components:

Tools Required:

Tape Measure Pencil Hex Head Power Drill Fastening

Screwdriver Hardware

(By others)

Caution

BRead instructions through completely before proceeding.

CFollow instructions carefully.

Installation contrary to instructions invalidates warranty.

DScreen should be accessible for complete removal should fabric

become damaged or should other service be required.

EScreen should be installed level (using a carpenter’s level).

FNothing should be fastened to screen frame or viewing surface.

GMake sure you have received all parts (see parts list below and

exploded diagram on page 3).

HInstaller is responsible for providing appropriate hardware for mounting.

Draper recommends using two people for assembly and installation.

When lifting assembled screen, do not lift at only one corner; lift at both

corners. Lifting by one corner could result in damage to the screen

frame, especially on large screens.

JThe ideal temperature range for assembling permanently tensioned

screens to prevent damaging the surface is 68°-78° F (20°-26° C).

Assembling below recommended temperatures may damage surface

and void warranty.

5/32"- Grade 8

Hex Screws

(several)

Mounting

Brackets

Sliding Snap

Attachments

(several)

Sliding

Hook & Loop

Attachment

(several)

Frame Extrusion

Section

Trim Frame

Section

Corner

Vertical Support

Connector

Front

View

Back

View

Trim Frame

Corner

Vertical Support

For Larger Sizes

For Hook and Loop Fabric Attachment:

1-A. Insert sliding Hook & Loop attachments

into all four (4) sections of the frame

(See Fig. 1-A).

For all fabric attachment methods:

2. Insert the Frame sections onto the corners pieces

(See ﬁg 2.) and secure them with provided screws.

5. Carefully lay the screen fabric down on a clean surface. Place

the assembled frame in the center of the fabric (see Fig. 4).

6. Slide the Hook & Loop or Snaps along the frame until they are

evenly spaced.

7. Pull the edge of the screen fabric and wrap it around the frame

(see ﬁg 5). Attach the screen fabric on all four (4) sides.

8. Carefully, turn the entire screen assmbly over and inspect.

Adjust the position of the sliding fabric attachments to remove

any wrinkles.

For Snap Fabric Attachment:

1-B. Insert sliding snap attachments into

all four (4) sections of the frame

(See Fig. 1-B).

For Larger sizes requiring Vertical support:

3. When assembling a large frame, use the two (2) vertical support

connectors on the top and bottom sections (see ﬁg. 3). Connect

these sections together with the Vertical Support Bar.

Secure all frame sections and connectors with provided screws.

Insert Sliding

Hook & Loop

Attachment

Approx.

3”

Spacing

Inser

Sliding

Snaps

Proﬁle Permanently Tensioned Projection Screen Page 2 of 4

Back of

Fabric

Back of Fabric

Wrap the fabric

around and attach to frame

Back of

Screen Fabric Assembled Frame

centered on

Screen Fabric

(Viewing Surface Down)

Figure

1 - A

Figure

1- B

Figure CFigure D

Figure E

Figure F

Proﬁle Permanently Tensioned Projection Screen Page 3 of 4

Front of F

abric

Front of Fabric

Back of

Fabric

Back of

Fabric

Front of Fabric

Trim Frame Attachment

1. Snap the trim frame corners onto all four (4) corners.

Adjust the fabric if needed (See ﬁg. 6).

2. Snap the trim frame sections onto all four (4) sides of the frame.

Adjust the fabric if needed (See ﬁg. 7).

Figure G

Figure H

Mounting On the Wall

1. Mount the Wall Brackets in the desired location. They must be installed level and have at least 2 fasteners (by others) per bracket.

2. Lift the assembled screen up and over the wall brackets. The screen will align with the channel in the frame.

3. Carefully let the screen settle on the wall brackets.

Wall Mounting

Bracket

WALLWALL

WALL

Screen Frame

Side View

Screen Frame

Side View

Mounting

Hardware

(by Others)

Wall

Mounting

Bracket

Lift Screen

Up & Over

Wall Brackets

It will align

with the Channel

in the Frame

Screen Frame

Properly Installed

3 ¾”

* Please Note:

Mounting bracket fasteners must

be positioned at least 4 ½” below

the ceiling or overhead structure.

4 ½”*

Ceiling or Overhead

Obstruction

Ceiling or Overhead

Obstruction

Ceiling or Overhead

Obstruction

¾”

B C D

(765) 987-7999

www

.draperinc.com

Andere Draper Projektionsfläche Handbücher

Draper

Draper Ambassador Handbuch

Draper

Draper Ultimate Access E Programmierhandbuch

Draper

Draper Acumen Recharge E Programmierhandbuch

Draper

Draper Envoy Handbuch

Draper

Draper Signature E Series Handbuch

Draper

Draper Access XL E Bedienungsanleitung

Draper

Draper Luma Bedienungsanleitung

Draper

Draper 218031 Bedienungsanleitung

Draper

Draper Clarion Bedienungsanleitung

Draper

Draper M Series Bedienungsanleitung

Draper

Draper Envoy Handbuch

Draper

Draper Ultimate Access XL V Bedienungsanleitung

Draper

Draper Targa Handbuch

Draper

Draper Cinefold Portable Folding Projection Screen Bedienungsanleitung

Draper

Draper Clarion Bedienungsanleitung

Draper

Draper Nocturne+E Programmierhandbuch

Draper

Draper Access MultiView Handbuch

Draper

Draper Artisan Series Handbuch

Draper

Draper Premier XL Programmierhandbuch

Draper

Draper Ropewalker Programmierhandbuch

Draper

Draper Salara Bedienungsanleitung

Draper

Draper MC1 Bedienungsanleitung

Draper

Draper Access M Bedienungsanleitung

Draper

Draper Targa Handbuch

Beliebte Projektionsfläche Handbücher anderer Marken

FART PRODUKT

FART PRODUKT Standard SCREEN Bedienungsanleitung

Elite Screens

Elite Screens Elite Tripod Series Bedienungsanleitung

Laarhoven

Laarhoven Companion II Bedienungsanleitung

Renogy

Renogy RMS-LFPS-US Bedienungsanleitung

Da-Lite

Da-Lite ExecutiveElectrol Bedienungsanleitung

Samsung

Samsung S*H65* Bedienungsanleitung

FONESTAR

FONESTAR PPTR-43100-FA Bedienungsanleitung

Slide Clear

Slide Clear Varro XL Bedienungsanleitung

Elite Screens

Elite Screens M85XWS1-SRM Bedienungsanleitung

OS РХ-090Н Bedienungsanleitung

Niko

Niko 10-845 Bedienungsanleitung

Speaka Professional

Speaka Professional 2357532 Betriebsanleitung

Sima

Sima XL-72 Bedienungsanleitung

Jasic

Jasic EVO 2.0 ET-200P Bedienungsanleitung

Elite Screens

Elite Screens Starling 2 Series Bedienungsanleitung

InFocus

InFocus SC-WALL GRY-92H Handbuch

Barco

Barco OverView MVL-615 Bedienungsanleitung

SI Dynamic 2 XL Bedienungsanleitung