Dream On Me Crib 663 Bedienungsanleitung

STYLE NO: 663

DREAM ON ME INC.

125 HELEN STREET

S.PLAINFIELD NJ 07080

908-791-0555

Read all instructions before assembling crib.

Save instructions for future use.

Adult assembly required.

Small parts may present choking hazard prior to assembly.

Enclosed please find simple step-by-step instructions to help

you quickly assemble your products.Before you begin we

recommend that you following the steps below:

1.Please read the instructions thoroughly.

2. Identify all parts and hardwares

3.You will need the following tools:

Philips head screw driver

Flat head screw driver Hammer

Do Not Use Power Drills or Drivers

To protect your parts during assembly please place them on a

soft surface.

To clean surface use only water on a damp cloth. Do not use

window cleaners or cleaning abrasives as it will scratch the

surface and could damage the protective coating.

Please note that the warning sticker is placed on the cribs to keep parents and

caregivers informed it is a requirement by law under CPSC And ASTM.

We do apologize for any inconvenience this may cause you.

WARNING !

MADE IN CHINA

· FAILURE TO FOLLOW THESE WARNINGS AND THE ASSEMBLY INSTRUCTIONS

COULD RESULT IN SERIOUS INJURY OR DEATH.

· READ ALL INSTRUCTIONS BEFORE ASSEMBLING CRIB. KEEP INSTRUCTIONS

FOR FUTURE USE.

ANY MATTRESS USDED IN THIS CRIB MUST BE AT LEAST 51-5/8 INCHES BY

27-1/4 INCHES WITH A THICKNESS NOT EXCEEDING 6 INCHES.

· CHECK THIS PRODUCT FOR DAMAGED HARDWARE, LOOSE JOINTS, MISSING

PARTS OR SHARP EDGES BEFORE AND AFTER ASSEMBLY.A FREQUENT CHECK

DAMAGED OR BROKEN.CONTACT DREAM ON ME INC.125 HELEN STREET

S.PLAINFIELD NJ 07080

FOR REPLACEMENT PARTS AND INSTRUCTIONAL

LITERATURE IF NEEDED.DO NOT SUBSTITUTE PARTS.

· TO REDUCE THE RISK OF SIDS, PEDIATRICIANS RECOMMEND HEALTHY INFANTS

BE PLACED ON THEIR BACKS TO SLEEP, OTHERWISE ADVISED BY YOUR

PHYSICIAN.

· STRINGS CAN CAUSE STRANGULATION! DO NOT PLACE ITEMS WITH A STRING

AROUND A CHILD’S

NECK,SUCH AS HOOD STRINGS OR PACIFIER CORDS.

DO NOT SUSPEND STRINGS OVER A CRIB OR ATTACH A

STRINGS TO TOYS.

· TO HELP PREVENT STRANGULATION TIGHTEN ALL FASTENERS. A CHILD CAN

TRAP PARTS OF THE BODY OR CLOTHING ON LOOSE FASTENERS.

· DO NOT PLACE CRIB NEAR WINDOWS WHERE CORDS FROM BLINDS OR DRAPS

MAY STRANGLE A CHILD.

· WHEN CHILD IS ABLE TO PULL TO A STANDING POSITION, SET MATTRESS TO THE

LOWEST POSITION AND REMOVE BUMPER PADS, LARGE TOYS AND OTHER

OBJECTS THAT COULD SERVE AS STEPS FOR CLIMBING OUT.

· WHEN CHILD IS ABLE TO CLIMB OUT OR REACH THE HEIGHT OF 35 IN.(89CM),

THE CRIB SHALL NO LONGER BE USED.

· DO NOT USE A WATER MATTRESS WITH THIS CRIB.

· REPLACE TEETHING RAIL IF DAMAGED, CRACKED OR LOOSE.

· IF REFINISHING, USE A NON-TOXIC FINISH SPECIFIED FOR CHILDREN'S

PRODUCTS.

· NEVER USE PLASTIC SHIPPING BAGS OR OTHER PLASTIC FILM AS MATTRESS

COVERS BECAUSE THEY CAN CAUSE SUFFOCATION.

· INFANTS CAN SUFFOCATE IN GAPS BETWEEN CRIB SIDES AND A MATTRESS

THAT IS TOO SMALL.

· INFANTS CAN SUFFOCATE ON SOFT BEDDING,NEVER ADD A PILLOW OR

COMFORTER.NEVER PLACE ADDITIONAL PADDING UNDER AN INFANT.

· FOLLOW WARNINGS ON ALL PRODUCTS IN A CRIB. SEE HEAD PANNEL AND

MATTRESS SUPPORT FOR WARNINGS AND INSTRUCTIONS.

SHOULD BE MADE DURING USE.DO NOT USE CRIB IF ANY PARTS ARE MISSING,

CONNECTION HARDWARE

a: 1-5/8” Allen head

bolt (18 pcs)

b:Wood dowels (12pcs) c:Allen wrench (1pc) d:3” Allen head bolt (4pcs)

e:Barrel nuts (14 pcs) f: 3/4” Allen head bolt (4 pcs) h:1-1/5” Screw (3 pcs)

i:Knob (3pcs) j:Shelf support (8pcs)

PARTS ENCLOSED IN CARTON

A:Changer right side (1pc)

k:Washer (2pcs) l:Bolt (2pcs) m:Belt (1pc)

n:Tip over restraints (1pc)

B:Top rail (1pc)

C:Bottom bar (1pc)

Changer back Changer middle

E:Bottom bar (1pc)

D: Top bar (1pc)

g: 2-1/5”Allen head

bolt (10 pcs)

q:Bolt (1pc)

p:Cross screws (24pcs)

PHILLIPS--HEAD SCREWDRIVER

REQUIRED FOR ASSEMBLY

----NOT INCLUDE

R:Metal spring support platform (1pc)

Z:Smalll pad (1pc)

Changer front bar

F: Top (1pc)

G: Middle (1pc)

H:Bottom (1pc)

I:Changing surface (1pc)

J:Changer middle panel

K:Changer bottom shelf (1pc)

L:Changer left side (1pc) M:Left back leg (1pc)

N:Left board (1pc)

O:Left front leg (1pc)

Drawer T:Front panel (3pcs)

U:Left side panel (3pcs)

V: Right side panel (3pcs)

W:Back panel (3pcs)

X:Bottom panel (3pcs)

Q:Back rail bottom (1pc) S:Front rail bottom (1pc)

Y:Changer middle shelf (2pcs)

P:Back top rail(1pcs)

αGuard rail (1pc)

CRIB ASSEMBLY

STEP 1

Attach The changer back(B&C) ,

and The changer middle(D&E) ,

and The changer front (F,G,&H)

toThe changer right side (A) using wood

dowels (b),

nuts(e) by allen

bolts (a),bolts (g) and barrel

wrench (c) .

Model shown is example only.

Styles may vary .

Lay down the assembled parts

on the floor .

Slide The changing surface (I)

into the groove in (D) along the

groove between (B) and (G) .

Slide (J) into the groove in (A)

along the groove between (D)

and (E) .

Then slide (K) into groove in

(A) along the groove between

STEP 2

Model shown is example only.

Styles may vary .

STEP 3

Model shown is example only.

Styles may vary .

Attach The changer back (B&C) and

The changer middle (D&E) and The

changer front (F,G&H) to The

changer left side (L) using wood dowels

(b),bolts (a) and bolts (q) by allen

wrench (c) .

Attach left back leg (M) and

left front leg (O) to left board

(N) using bolts (d) and barrel

nuts (e) .

STEP 4

Model shown is example only.

Styles may vary .

STEP 5

Model shown is example only.

Styles may vary .

Attach The top rail (P) and the

bottom rail (Q) to The changer

side (L) and left headboard

using wood dowels(b),bolts(q&g)

and barrel nuts(e) by allen wrench.

Locate the mattress support (R)

with tabs .

Be sure the smooth side of the

mattress support (R) is faced upward .

Position the tabs of the mattress

support(R) to mount to the selected

position in the legs .

Insert the bolts (f) , through the

tabs and into thread inserts ,

then tighten securely with allen

wrench (c) .

STEP 6

Model shown is example only.

Styles may vary .

q q

STEP 7

Model shown is example only.

Styles may vary .

STEP 8

Model shown is example only.

Styles may vary .

Attach The bottom front rail (S)

to The changer side (L) and

the left head board using

bolts (g),barrel nuts (e) and allen

wrench (c) .

Attach left side panel (U) & right side

panel (V) to back panel (W) by

inserting cross screw (p) into the holes

on left side panel (U) & right side panel

(V) .

DO NOT tighten all .

STEP 9

Model shown is example only.

Styles may vary .

Slide the bottom panel (X) painted side

up , into grooves of the left side panel

(U) and the right side panel (V) . In

the end , insert the bottom (X) into the

groove of back panel (W) .

Attach the front panel (T) to the left side

panel (U) and the right side panel (V)

by inserting cross screws (p) into the

holes on left side panel (U) & right side

panel (V) .

Inserting the bottom panel (X) into the

groove of the front panel (T) .

Tighten all the screws .

Assemble the rest two drawers follow step

8,9,10 .

STEP 10

Model shown is example only.

Styles may vary .

Attach the knob (i) to the front panel (T) by

screw (h) .

STEP 11

Model shown is example only.

Styles may vary .

Insert the shelf supports (j) in the holes in the posts of changing table.

Then place the changer middle shelf (Y) inside the shelf support.

Tighten the screws in the shelf supports (j) .

PHILLIPS-- HEAD SCREWDRIVER REQUIRED

FOR ASSEMBLY- NOT INCLUDE

Inhaltsverzeichnis

Andere Dream On Me Baby- und Kleinkindmöbel Handbücher

Dream On Me

Dream On Me MONTREAL Bedienungsanleitung

Dream On Me

Dream On Me 662 Bedienungsanleitung

Dream On Me

Dream On Me SAN-FRAN Bedienungsanleitung

Dream On Me

Dream On Me SOHO Bedienungsanleitung

Dream On Me

Dream On Me 437 Bedienungsanleitung

Dream On Me

Dream On Me 683 Bedienungsanleitung

Dream On Me

Dream On Me 646 Bedienungsanleitung

Dream On Me

Dream On Me STORYBROOKE Bedienungsanleitung

Dream On Me

Dream On Me 654 Bedienungsanleitung

Dream On Me

Dream On Me 645 Bedienungsanleitung

Dream On Me

Dream On Me HORTON Bedienungsanleitung

Dream On Me

Dream On Me CLOVER 676 Bedienungsanleitung

Dream On Me

Dream On Me fisher-price Siesta Bedienungsanleitung

Dream On Me

Dream On Me 620FP Bedienungsanleitung

Dream On Me

Dream On Me SKYWARD Bedienungsanleitung

Dream On Me

Dream On Me 633 Bedienungsanleitung

Dream On Me

Dream On Me ZOODLE Bedienungsanleitung

Dream On Me

Dream On Me Zodiak Bedienungsanleitung

Dream On Me

Dream On Me 680 Bedienungsanleitung

Dream On Me

Dream On Me Bassinet Bedienungsanleitung

Dream On Me

Dream On Me 436 Bedienungsanleitung

Dream On Me

Dream On Me 643 Leitfaden

Dream On Me

Dream On Me 442 Bedienungsanleitung

Dream On Me

Dream On Me Portable Deluxe Playrad Bedienungsanleitung

Beliebte Baby- und Kleinkindmöbel Handbücher anderer Marken

Mocka

Mocka Learning Tower Bedienungsanleitung

VERTBAUDET

VERTBAUDET 62003-2789 Bedienungsanleitung

Summer

Summer MY FUN POTTY Bedienungsanleitung

Grotime

Grotime Changeover Bedienungsanleitung

Fillikid

Fillikid 1221 Bedienungsanleitung

Relita

Relita loft bed ALEX Bedienungsanleitung

Joovy

Joovy Qool Bedienungsanleitung

KidKraft

KidKraft Step n Store Bedienungsanleitung

Fisher-Price

Fisher-Price L4889 Bedienungsanleitung

Germania

Germania Moon 4048.101 Bedienungsanleitung

BabyGo

BabyGo Amila Bedienungsanleitung

Fisher-Price

Fisher-Price CBV06 Bedienungsanleitung

Fisher-Price

Fisher-Price H4790 Bedienungsanleitung

Graco

Graco Dream Suite Bedienungsanleitung

Delta Childrens Products

Delta Childrens Products BB87116CR Bedienungsanleitung

Costway

Costway BB5591 Bedienungsanleitung

SAUTHON

SAUTHON UP CHENE DORE UI101A Bedienungsanleitung

Delta Children

Delta Children Classic Bedienungsanleitung