Drill Master 300 Bedienungsanleitung
MODEL300
User’s Guide
Guía del usuario
Mode d’emploi
1. ALIGN BITS
3. SPLIT POINTS
2. SHARPEN BITS
<REPLACE IMAGE>
<REPLACE IMAGE>
Thank you...
for buying your Drill Doctor®
. It will become a valuable tool
because you will now have sharp drill bits before a project,
during a project, and after a project.
I am very proud of the quality of our products and I am equally
proud of the great people at Drill Doctor who design and produce
them. If you have questions or need help with your Drill Doctor,
please contact us and one of our customer representatives will
be there to help. We support what we build!
Use this User’s Guide to learn to operate your Drill Doctor. I also
want to invite you to visit our website at www.DrillDoctor.com.
There you will find:
•Demonstrations of all operations with the sights and sounds
leading to successful drill bit sharpening
•Downloadable copies of the User’s Guide
•Warranty registration
•Service and contact numbers
Again, thank you for buying a Drill Doctor. Now enjoy its
convenience and quality.
Hank O’Dougherty, President, Drill Doctor®
Phone: 1-888-MYDRILL (693-7455)
1-541-552-1301
Email: tech@DrillDoctor.com
Web: www.DrillDoctor.com
1
www.DrillDoctor.com
Contents
English
Safety .......................................................................... 2
Getting to Know Your Drill Doctor®............................ 3
Identifying Basic Drill Bits ........................................... 4
Anatomy of a Drill Bit ................................................. 4
The Drill Doctor®Sharpening Process ......................... 5
Aligning the Drill Bit ................................................... 5
Sharpening the Drill Bit .............................................. 8
Identifying Correctly Sharpened Drill Bits ................... 9
Sharpening Bits of Different Lengths
and Diameters ....................................................... 10
Aligning and Sharpening Masonry Drill Bits ............ 11
Questions and Answers ........................................... 12
Drill Doctor®Maintenance ....................................... 15
User-Replaceable Parts ............................................ 18
Warranty .................................................................. 19
Español ........................................................... 20
Français .......................................................... 00
English
2www.DrillDoctor.com
WARNING: Some dust created by power sanding,
grinding, miscellaneous construction activities, as well
as contents from the machine including the molding,
wiring, grinding wheel, or any other parts may contain
chemicals known to the State of California to cause
cancer, birth defects or other reproductive harm and can
be hazardous to your health.
Safety
•Carefully read this User’s Guide before operating the Drill
Doctor.
•When using electric tools, basic safety precautions should
always be followed to prevent the risk of fire, electric shock
and personal injury.
•Always disconnect the Drill Doctor when cleaning or
inspecting. Make sure the switch is in the OFF position before
plugging in the power cord.
•Do not use in wet or damp locations.
•Do not abuse the cord.
•Wear eye protection when using or cleaning the Drill Doctor.
•Never touch internal parts of the sharpener when it is turned
on or plugged in.The rotating diamond wheel can cause injury.
•As with any power tool, the Drill Doctor should be kept out
of the reach of children.
3
www.DrillDoctor.com
Getting to Know Your Drill Doctor®
Power Switch
Alignment
Button
Wheel Access
Cover
Alignment
Port
Sharpening
Port
Cam Guide
Flat Spot
Flat Spot
Window
Cam
Chuck
Knob
Chuck
Watch the User Video included with your Drill Doctor®
and become a sharpening expert in minutes!
<MODIFY ART>
<MODIFY ART>
<MODIFY ART>
<MODIFY ART>
4www.DrillDoctor.com
Identifying Basic Drill Bits
The Drill Doctor®is most efficient when used to sharpen a drill
bit’s original point angle.With its standard diamond sharpening
wheel it will sharpen high-speed steel, cobalt, TiN-coated,
carbide and masonry drill bits.
It has been designed and engineered to sharpen three of the
most common drill bit types:
Standard Point
This general purpose point (normally
118°) is used for drilling softer
materials like cold rolled steel,
aluminum, and wood.
Masonry bits (normally 135°) have
a carbide insert at the point and are
used for drilling materials like cement,
brick, and ceramic.
Split point bits (normally 135+°)
are self-centering and are generally
used for tempered steels, hard alloys
or hard cast materials.
Anatomy of a Drill Bit
It is important to understand that
each bit has a Chisel Edge, a Cutting
Edge, a Heel, and a Relief Angle.
When viewing a well sharpened bit
from the end, the entire surface from
the Cutting Edge to the Heel will have
a finely ground surface without ridges
or indentations.The Heel will always be
lower than the Cutting Edge.
Heel
Chisel
Edge
Cutting
Edge
Heel Cutting
Edge
Relief
Angle
5
www.DrillDoctor.com
The Drill Doctor®Sharpening Process
The sharpening process includes 2 easy procedures:
1. Align the bit in the Chuck.
2. Sharpen the bit.
Aligning the Drill Bit
(See page 11 to align and sharpen a Masonry drill bit.)
4.
1. Turn the Chuck Knob to the left
to open the Chuck and insert
your drill bit into the Chuck
(about halfway in is fine for
now).
Turn the Chuck Knob to the right
to tighten.
Turn the Chuck Knob to the left
just until the bit will slide and
rotate in the Chuck.
With one hand, press in and
hold the Alignment Button on
the Drill Doctor (do not release
until Step 7).
2.
3.
<MODIFY ART>
<MODIFY ART>
6www.DrillDoctor.com
Flat Spots
5.
With your free hand, insert the
Chuck into the Alignment Port—
make sure the flat spots on the
Chuck match the flat spots in the
port.
At this point, the Chuck
should be inserted into the
Alignment Port with the
flat spots hidden, and the
Chuck should be locked in the port.
6.
8.
With the Alignment Button held
in, push the drill bit forward until
it is against the Drill Stop.
Look at the drill bit through
the Window over the
Alignment Port—it should be
against the Drill Stop.
Release the Alignment Button
and hold the chuck in place with
your thumb.
While looking in the Window,
turn the drill bit to the right until
you feel the Bit Clamps grip
the bit at its narrowest
point (the bit is now difficult
to turn either way).
7.
<MODIFY ART>
<MODIFY ART>
<MODIFY ART>
<MODIFY ART>
<MODIFY ART>
<MODIFY ART>
<MODIFY ART>
<MODIFY ART>
7
www.DrillDoctor.com
Press the Alignment Button in
and remove the Chuck from the
Alignment Port. Tighten the
Chuck Knob firmly.
You are now ready to sharpen the
drill bit.
10.
9.
Turn the Chuck Knob to the right
until it is tight but make sure that
the bit did not turn and the Chuck
did not back out of the Port.
<MODIFY ART>
<MODIFY ART>
<MODIFY ART>
<MODIFY ART>
8www.DrillDoctor.com
Sharpening the Drill Bit
Before sharpening you should know:
•Keep the Cam in contact with the Cam Guide as you
sharpen—push the Chuck straight into the port.
•Only light pressure is required—let the diamond wheel do
its work.
•Turn the Chuck an even number of half-turns:
3/32 inch bits—use 2 to 4 half-turns,
1/8 inch bits—use 4 to 6 half-turns,
3/8 inch bits—use 16 to 20 half-turns.
•You will hear a grinding noise as you complete each half-
turn and each side of the bit face is ground. (zzzzzzzzz)
•The Chuck will rock as you turn it and the Cam rides on the
Guide.
13.
12.
Insert the Chuck into the
Sharpening Port.
It will be easier to sharpen the
bit if you stand up.
Align one of the white marks on
the Cam with the Cam Guide,
and push the Power
Switch to the ON (I)
position.
14. Turn the Chuck in complete half-
turns to the right so the white
marks on the Chuck move to the
Cam Guide one after the other.
It is important that your half-
turns be continuous—do not
stop or hesitate in the middle.
Cam Guide White Mark
Cam
Inhaltsverzeichnis
Andere Drill Master Elektrowerkzeuge Handbücher
Drill Master
Drill Master 93816 Bedienungsanleitung
Drill Master
Drill Master Drill Doctor 750X Bedienungsanleitung
Drill Master
Drill Master XP Bedienungsanleitung
Drill Master
Drill Master XP Bedienungsanleitung
Drill Master
Drill Master 97626 Montageanleitung
Drill Master
Drill Master 94855 Bedienungsanleitung
Drill Master
Drill Master 350x Bedienungsanleitung
Drill Master
Drill Master XP Bedienungsanleitung
Drill Master
Drill Master 67042 Installationshandbuch
Drill Master
Drill Master 350x Bedienungsanleitung
Drill Master
Drill Master 95578 Bedienungsanleitung
Drill Master
Drill Master 750SP Bedienungsanleitung
Drill Master
Drill Master 62405 Bedienungsanleitung
Drill Master
Drill Master 68242 Bedienungsanleitung
Drill Master
Drill Master 120 Volt Variable Speed Jigsaw Bedienungsanleitung
Drill Master
Drill Master 96289 Installationshandbuch
Drill Master
Drill Master 250 Handyman Bedienungsanleitung
Drill Master
Drill Master 97626 Bedienungsanleitung
Drill Master
Drill Master Heat gun Bedienungsanleitung
Drill Master
Drill Master Drill Doctor 500X Bedienungsanleitung
