Drive DeVilbiss Healthcare Elite Bedienungsanleitung

Elite with Digital Pump

User Manual

Elite Mattress with PUMP1000

The Elite

The Elite Mattress Replacement System provides a cost effective solution for both the prevention

and treatment of pressure ulcers in any healthcare environment. With a fully encased layer of visco-

elastic foam beneath the cells for added support, the Elite mattress combines a comfortable support

surface and alternating therapy, suitable for patients at Very High Risk of developing pressure ulcers.

Elite Mattress with PUMP1000

Content

Fire Warning

Safeguards

Intended Use

Contradictions

Installation

Pump Functions

Mattress Functions

Storage

Damage Prevention

Cleaning

Maintenance

Technical Description

Troubleshooting

Warranty

Elite Mattress with PUMP1000

Fire Warning

In order to reduce the risk of fire:

DO NOT SMOKE - Smoking will contaminate the product and is NOT permitted around or on the

mattress system. This is a common cause of fatal fires. This system uses room air for circulation

through the mattress. A cigarette could burn a hole in the mattress surface and cause damage to the

mattress system. Patient clothing, bed sheets and other items, may be combustible and could catch

fire. Failure to observe this warning could result in a severe fire, property damage, physical injury or

death.

DO NOT - use candles on or around the mattress system

DO NOT - use electric blankets with this mattress system

DO NOT – use in the presence of flammable anaesthetics, explosions could occur

DO - keep hot equipment off and away from the mattress surface, E.g. Hair dryer, curling tong, etc.

DO - keep matches and lighters away from children

DO - keep heaters away from the mattress system

Follow all manufacturers’ instructions and warning.

It is advised that a full fire risk assessment is carried out prior to using this equipment

In case of fire, exit and call the emergency services.

Please refer to MDA/2013/093 for further guidance

Elite Mattress with PUMP1000

IMPORTANT SAFEGUARDS

READ ALL INSTRUCTIONS BEFORE USE

DANGER - To reduce risk of electrocution:

1. Always unplug this product immediately after using.

2. Do not use while bathing.

3. Do not place or store product where it can fall or be pulled into a tub or sink.

4. Do not place in or drop into water or other liquid.

5. Do not reach for a product that has fallen into water. Unplug immediately.

WARNING – To reduce risk of burns, electrocution, fire or injury to person:

1. This product should never be left unattended when plugged in.

2. Close supervision is necessary when this product is used on or near children.

3. Use this product only for its intended use as described in this manual. Do not use attachments not

recommended by the manufacturer.

4. Never operate this product if it has a damaged cord or plug, if it is not working properly, if it has

been dropped or damaged, or dropped in water, return the product to a service centre for

examination and repair.

5. Keep the cord away from heated surfaces.

6. Never block the air opening of this product or place it on a soft surface, such as a bed or couch,

where their openings may be blocked. Keep the air opening free of lint, hair, and other similar

particles.

7. Never drop or insert any object into any opening or hose.

8. Connect this product to a properly grounded outlet only. See grounding instructions.

NOTE, CAUTION AND WARNING STATEMENTS

NOTE -

Indicates some tips

CAUTION -

Indicates correct operating or maintenance procedures in order to prevent damage to or

destruction of the equipment or other property

WARNING -

Calls attention to a potential danger that requires correct procedures or practices in

order to prevent personal injury

SYMBOLS

Class II electrical device

“BF” symbol indicates this product is according to the degree or protecting

against electric shock for type BF equipment.

Attention, instructions should be read

Authorised representative in the European community

Elite Mattress with PUMP1000

Manufacturer

Disposal of Electrical & Electronic Equipment (WEEE)

Product conforms to all relevant standards (See Declaration of Conformity)

No smoking on or near the mattress

Passive Radio Frequency Identification (RFID) tags maybe in use throughout the

system

Keep dry

Intended Use

The Elite Replacement System is intended to reduce the incidence of pressure ulcers while

optimising patient comfort. It may also be appropriate for the following:

•Individual home care setting and long-term care facilities

•Pain management as prescribed by a healthcare professional

Contraindications

Users with the following condition could experience contraindications if they use this device:

•Cervical or skeletal traction

•Unstable spinal cord injuries

•During some orthopaedic treatments

Elite Mattress with PUMP1000

Installation

Unpackaging

When unpacking the Elite System, check for any damage which may have occurred during transit. If

found to be damaged remove the system from use and contact Drive DeVilbiss Healthcare Ltd.

Setting up

1. Remove all existing mattress surfaces from the bed frame

2. Ensure the printed surface is placed facing upwards

3. Place the mattress on the bed frame with the image of the feet on the cover placed at the foot

end of the bed

4. Secure the mattress to the moveable platforms of the bed frame using the straps on the base of

the cover

5. Hang the pump at the foot end of the bed; adjust the hangers to secure the pump against the

foot board to reduce vibration. Avoid placing the pump on the floor

6. Join the connectors on the mattress feed pipes to the side of the pump

NOTE:

Ensure the feed pipes on the mattress are not kinked or tucked under the mattress as this

will restrict airflow

7. Plug the pump into the mains electrical outlet

NOTE:

Any extra power cord should be neatly arranged and off the floor to avoid any trips and any

damage to the cable

8. Turn on the pump using the main switch found on the side of the pump and press the standby

button on the front of the pump

9. The pumps low pressure indicator will remain lit until the mattress is inflated to the desired

pressure. The pumps initial set up can take up to 30 minutes

10. Adjust the pressure setting according to the patients weight

11. Place a loosely fitted sheet over the mattress

Elite Mattress with PUMP1000

Pump Functions

On/Off Standby

Main power rocker switch can be located at the side of the pump. The

standby button is located on the front panel

Lock Out

After 5 minutes of inactivity, the pump will lock out its functions. To

unlock, press and hold the lock out key for 3 seconds

Mute

Press the mute button to silence the alarms

Cushion Mode

Press and hold for 3 seconds to initiate the cushion mode. To return to the

mattress mode, press and hold the cushion mode button for 3 seconds

Static

All cells in the mattress will be inflated by pressing this button. The pump

will automatically revert back to alternating mode after 20 minutes

Alternate

One in two cycle, this function will provide optimum pressure relief

Patient Weight Settings

10 comfort levels are available for a variety of patient weights.

Use the- / + to adjust the weight settings accordingly

Low Pressure Indicator

When low pressure in the mattress is detected, the pump alarm and the

LED will illuminate

Power Failure Indicator

When a power cut is detected, the pump will alarm and the LED will

illuminate

Service Light

This light will illuminate when the pump is due an annual service. The

pump will require recalibrating to deactivate this LED

Elite Mattress with PUMP1000

Mattress Functions

•High frequency welded cover which reduces the risk of ingress and aids the decontamination

process

•A highly resilient polyurethane covers which can be cleaned down with 10,000ppm sodium

hypochlorite

•50mm deep visco foam to act as a support should there be a power failure

•CPR tag, which when pulled will rapidly deflate the mattress

•Securing straps to keep the mattress in situ during alternation

•Connectors can be joined together to allow for easy transportation

Storage

For the ease of storage, mattresses can be rolled up and stored in a holdall or bag.

To prevent mattresses becoming contaminated and/or damaged during storage:

•Mattresses should be stored within a polythene cover or bag

•Do not store other objects such as side rails or bed ends on top of mattresses

•Allow adequate space for the stored mattresses to be manoeuvred

Damage Prevention

Take extra care not to puncture the cover and cells as this will allow fluid ingress and ultimately

rupture the cells and contaminate the foam base. To prevent the cover from being punctured

and/or damaged:

•Do not place sharp objects such as hypodermic needles, scalpels, etc., on the mattress

•Avoid wearing protruding jewellery i.e. rings with stones

•Take extra care when using medical equipment such as monitors, drip stands, side rails,

transfer boards, etc.

Elite Mattress with PUMP1000

Cleaning

The following guidelines are suggested by Drive DeVilbiss Healthcare as being suitable infection

control procedures. Further information is available upon request.

Pump Unit

General cleaning may be affected by using a cloth dampened with a mild detergent and water

solution. This approach may be followed either by wiping with a sodium hypochlorite solution to a

dilution of 1000 ppm or by using an alcoholic wipe.

WARNING:

Do not use phenolic or biological based cleaning solutions

Do not use any abrasive compounds or cleaning pads

Do not submerge the pump in to water or any other liquids

Ensure that mains power supply to the pump has been disconnected prior to

cleaning.

Mattress

General Cleaning

During general use, the mattress and tube set may be cleaned using a neutral detergent solution.

Using a single use wipe, clean the mattress cover and/or tube set with a solution of neutral

detergent and hot water. Rinse thoroughly with clean water and a damp single use wipe.

NOTE:

The top, bottom and all four sides of the cover and tube set, including under the zip flaps

MUST be cleaned.

The foam used in this product cannot be decontaminated, therefore, it is recommended

that any contamination must result in the foam being replaced

WARNING:

Do not use phenolic or biological based cleaning solutions

Do not use any abrasive compounds or cleaning pads

Ensure the cover and tube set are completely dried before refitting the cover.

Disinfecting the mattress

If the cover is heavily soiled or has been exposed to bodily fluids such as blood, it will require a

thorough cleaning procedure:

Wipe the cover using a single use wipe with Chlorine Solution (of up to 10,000ppm) and cold water.

Rinse thoroughly with clean water and a damp single use wipe. Make sure the cover is completely

dried before refitting or storing.

Wipe the cells using a single use wipe with Chlorine Solution (1,000ppm) and cold water. Rinse

thoroughly with clean water and a damp single use wipe. Make sure the cells are completely dried

before refitting or storing.

Frequent or prolonged exposure to higher concentration disinfectant solutions may affect the

longevity of the mattress and affect its functionality.

NOTE:

Some surface wrinkling may also occur

Inhaltsverzeichnis

Andere Drive DeVilbiss Healthcare Inneneinrichtung Handbücher

Drive DeVilbiss Healthcare

Drive DeVilbiss Healthcare GRAVIMED PROTEXX Bedienungsanleitung

Drive DeVilbiss Healthcare

Drive DeVilbiss Healthcare GRAVIMED BARITEXX Bedienungsanleitung

Drive DeVilbiss Healthcare

Drive DeVilbiss Healthcare SUPPLITO Bedienungsanleitung

Drive DeVilbiss Healthcare

Drive DeVilbiss Healthcare 1275/BAR/EX Bedienungsanleitung

Drive DeVilbiss Healthcare

Drive DeVilbiss Healthcare GRAVIMED SIMPLEXX Bedienungsanleitung

Drive DeVilbiss Healthcare

Drive DeVilbiss Healthcare Bradshaw Bariatric Bedienungsanleitung

Drive DeVilbiss Healthcare

Drive DeVilbiss Healthcare MED AIRE DUO WAVE Bedienungsanleitung

Drive DeVilbiss Healthcare

Drive DeVilbiss Healthcare 860000001 Bedienungsanleitung

Drive DeVilbiss Healthcare

Drive DeVilbiss Healthcare GRAVIMED MULTIFLEXX Bedienungsanleitung

Drive DeVilbiss Healthcare

Drive DeVilbiss Healthcare MED AIRE FLEX WAVE Bedienungsanleitung

Drive DeVilbiss Healthcare

Drive DeVilbiss Healthcare Eclipse II Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung