DROMEAS Alma HT Bedienungsanleitung

Alma H - Dismantling

Remove the connections from the noches.

Unscrew the feet.

PLANT: Industrial Area of Serres, 62 121, Serres, Greece l Τ. +30 23210 99220 l F. +30 23210 99270

www.dromeas.gr le-mail: dromeas@dromeas.gr

PEFC/18-41-42

EN ISO 14001 : 2004

No.: 04012056

OHSAS 18001 : 2007

No.: 03012016

EN ISO 9001 : 2015

No.: 20 100 163001776

Alma HT

Operating instructions

For electric adjustable desk with metallic color RAL 9006

Height adjustment 650 - 1290mm

Lifting capacity 125kg

05-2019

Alma HC

www.dromeas.com

Headquarters

Industrial Area of Serres,

62 121, Serres, Greece

Τ. +30 23210 99220

F. +30 23210 99270

e-mail: [email protected]

DROMEAS S.A.

Office Furniture Manufacturer

Version: v1.1 ALMA HC/HT

Date: 20/04/2019

Prologue and instructions for the user

This operating manual informs you about the accessories, operation, use and

maintenance of the Alma HT/HC working desk with electric height adjustment.

These operating instructions are part of the Alma HT/HC working desk. They are

valid only as a complete document. This manual should also be included in the

case of resale of this office desk. Users of the Alma HT/HC working desk must

read and comply with these safety instructions.

Dromeas implements a quality management system that meets the requirements

of DIN EN ISO 9001. The product has been certified in accordance with EN 527-1,

EN 527-2, EN 527-3, GS and RAL UZ 38:

A five year guarantee of good functioning is provided. With regard to electrical

components, a two-year warranty is provided.

Safety Precautions and Instructions

The electrically adjustable Alma HT/HC working desk is designed exclusively for

office use. Any other or further use is considered inappropriate. In the event of

inappropriate use, Dromeas assumes no liability for any damages that may be

incurred and no warranty for the faultless and functional use of the parts. The

intended use also includes compliance with all the instructions in this manual.

Safety instructions help to avoid personal injuries and material damage. The basic

precautions for the unpacking, assembly and operation of the working desk should

be carefully read in Chapter 3.

Information: Dromeas assumes no liability or warranty for damages and

malfunctions resulting from noncompliance with the operating instructions.

Further information:

https://www.dromeas.com/

E-Mail: dromeas@dromeas.gr, info@dromeas.gr

T.: +30 23210 99220

Headquarters:

Industrial Area of Serres

62121 Serres, Greece

T.: +30 23210 99220

F.: +30 23210 99270

E-Mail: dromeas@dromeas.gr

Contents

1. Introduction ..........................................................................................................................

2. Product description ………..................................................................................................

2.1 Packaging and parts (see attachment) ….................................................................

2.2 Used materials .……….............................................................................................

2.2.1 Packaging ….………………………………………………………………….......

2.2.2 Working desk ….............................................................................................

2.3 Technical data .........................................................................................................

2.3.1 Working desk ……..……………………………………………….....................…

2.3.2 Electrical parts ……………………………………………………………….........

2.4 Optimal desk height ……...........................................................................................

2.5 Environmental aspects of the product ......................................................................

3. Instructions for use

3.1 Safety regulations ……..............................................................................................

3.2 Unpackaging and disposal of packaging material ....................................................

3.3 Assembly and installation .........................................................................................

3.4 Height adjustment / Compensation of ground anomalies

…………………………….

3.5 Handset ....................................................................................................................

3.5.1 Bluetooth Smart Control (optional equipment) ….

3.5.2 Memory controller (optional equipment) ….........

3.5.3 Reset procedure …………………………………………………………………....

3.6 Collision tracking …………………………………………………………………………...

3.7 Care and maintenance …...........................................................................................

3.8 Disassembly ...............................................................................................................

3.9 Storage and transportation …………..…………….......................................................

3.10 Disposal, reuse, recycling ………………………………………………………….........

4. Glossary .................................................................................................................................

5. Attachments: Assembly / disassembly plans ………………...................................................

1. Introduction

The ALMA office series has been enriched with design solutions and proposals that

respond to the current needs of flexibility and ergonomics in the modern work

environment.

The ability to adjust the height of the working surface ensures maximum fitting of the

furniture to the people. It creates a functional and flexible workspace, while maintaining its

unified aesthetics. The lifting mechanism (motors) is mounted on two vertical supports

(lifting units) on the working desks. The height adjustment of the office is achieved by

selecting the corresponding keys on the controller. The adjustment range is 640-1290 mm,

the maximum lifting speed is estimated at 38 mm / sec and the lifting capacity is limited to

105 kg.

The following instructions give you a detailed description of the product with reference to

the packaging and the various parts, technical specifications and materials used, as well

as its ergonomic and environmental aspects. Furthermore we provide all the necessary

instructions for the life cycle of the product: from assembly and use to the end of the life

cycle. Finally, you can find a glossary of relevant concepts as well as the assembly plans

attached.

Information: Dromeas assumes no liability or warranty for damages and

malfunctions resulting from noncompliance with the operating instructions.

2. Product description

2.1 Packaging and parts (see Attachement)

All available accessories are listed in the technical description of the product that is

published on the website https://www.dromeas.com

A wide range of accessories in various materials, surfaces and colors is available for our

products. For detailed information about available system components and additional

orders and subsequent deliveries, please contact Customer Support

https://www.dromeas.com or visit the online store https://eshop.dromeas.gr

2.2 Used materials

2.2.1 Packaging

The working desk is packed in a polystyrene carton. For desktop protection, edge and

corner protectors made of PE are used.

2.2.2 Working desk

- Steel sheet ST 37 DCP (cold rolled).

- Chipboard P2 of category E1 and ABS 2 mm perimeter edge banding. Certified according

to ISO EN-14322.

- ABS margin tape and other plastic PP parts.

2.3 Technical data

2.3.1 Working desk

Alma HT/HC

Dimensions: DROMEAS catalogue

Weight: (see label)

2.3.2 Electrical parts

Control and movement

Maximum ambient temperature for storage and transport: -10 °C to 50

°C

Maximum operating temperature: 5 °C to 40 ° C

Maximum storage, transport and operation humidity: 700 to 1060 hPa

Rated frequency: 50 Hz

Rated voltage: 230 V AC ~ ± 10%

Carrying capacity: up to 105 kg

Maximum operating cycle: 2 min ON / 18 min OFF

Protection category (with grounding): I

Maximum power consumption during lifting:

-2 telescopic columns per working desk: 200 W

Power consumption in standby mode: = 0,1 W

Noise emissions < 55 dB

2.4 Optimal desk height

Adjusting the optimum desk height is critical for the right work position. Even with the use

of an ergonomic office chair, it is necessary to get up for a while. The human body benefits

more from the frequent position change. Static loads in the spine are minimized and blood

circulation is improved. With an ergonomic working desk for everyday use, we feel more

energetic and creative.

"Movement is part of our nature, only death leads to total rest"

- Blaise Pascal (famous mathematician, physicist and philosopher)

To adjust the optimum desk height when you are sitting, follow these steps:

1. Sit on the office chair

2. The thigh with the tibia must be at least 90 degrees and the seat should be

approximately the same as your knees. If not, adjust your office chair higher or

lower. Your back should always rest on the back of the chair

3. Let your hands loose. Fold the forearms in the office chair or desktop. The

keyboard is located exactly horizontally on your forearms. Otherwise, the height

of the office should be adjusted accordingly upwards or downwards

Our pictures and drawings will help you properly set up your computer's office both in the

sitting position and in the upright position:

2.5 Environmental aspects of the product

DROMEAS, with a sense of responsibility towards the environment and the next

generation, adopts systems / tools (LCA) for the development of its products. The study of

such analyzes by the designers of the company and their cooperation with the

construction department contributes to the continuous development and improvement of

the products it produces in order to fully meet the category of green and environmentally

friendly products according to the European regulations:

- Minimal design to minimize the use of raw materials, while maintaining the required

stability and safety in accordance with relevant European and international standards.

- Use of raw materials, especially wood, from controlled sources. This ensures that they

come from sustainable environmental management according to PEFC and FSC

standards.

- Exclusive use of materials that are compatible with the latest safety and health

requirements for the end user. Specifically, in this office you use an E1 class surface

desk and an antibacterial powder to cover its metal parts.

3. Instructions for use

3.1 Safety regulations

The electrically adjustable Alma HT/HC working desk is designed exclusively for office

use. Any other or further use is considered inappropriate use. In the event of inappropriate

use, Dromeas assumes no responsibility for any damages that may occur and no warranty

for the faultless and functional operation of the parts. The intended use also includes

compliance with all the instructions in this manual.

DANGER: Contact with electrical voltage can cause serious injury or death!

Unplug or insert plug connections only when there is no voltage

Do not attempt to open the enclosures of the following items: controller, lifting units,

control lever

Metal parts of the work desk may have a high voltage and cause damage to cables

and connections

Do not ground electrical equipment on the desk frame

WARNING: Risk of crushing!

Ensure that there is enough lateral clearance (at least 2.5 cm) in all surrounding

objects, walls, etc. throughout the lifting stroke range

WARNING: Risk of injury and damage!

When transporting or moving the office, keep it carefully only from the frame

WARNING: Risk of injury and damage!

When loading the CPU computer base with a weight greater than the approved

weight (15 kg), the fastening screws may break.

3.2 Unpackaging and disposal of packaging material

It is suggested that you keep children at a safe distance when unpacking. As described in

section 2.2.1, the packaging of the product consists of light, reusable materials. The user

is required to perform a separation of the packaging materials. It should be noted that the

company works with certified recyclers.

3.3 Assembly and installation

Dromeas recommends that the installation be made by a specialist representative or an

assembly company. For correct assembly, please refer to the assembly drawing (see

attachment). It is necessary to check the electrical equipment of the working desk. The

installation should be carried out by 2 technicians in an area of at least 3 m x 3 m. To

avoid damage to the office or floor, place a suitable soft surface (eg blankets) in the

working area.

Only disconnect or install the electrical connections when there is no electrical voltage.

DANGER: Contact with electrical voltage can cause serious injury and death!

The supply connections can only be made by qualified and authorized personnel

3.4 Height adjustment / Compensation of ground anomalies

To compensate for ground anomalies, rotate the regulators up to 2.0 cm respectively.

Note: If the workplace must be moved or changed, at least two people must be occupied.

Dragging is not recommended as this may cause damage to sensitive floors.

3.5 Handset

3.5.1 Bluetooth Smart Control (optional equipment)

Andere Handbücher für Alma HT

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere DROMEAS Inneneinrichtung Handbücher

DROMEAS

DROMEAS Line Bedienungsanleitung

DROMEAS

DROMEAS Zeta Bedienungsanleitung

DROMEAS

DROMEAS Apollo Bedienungsanleitung

DROMEAS

DROMEAS Action D Bedienungsanleitung

DROMEAS

DROMEAS Smart Bedienungsanleitung

DROMEAS

DROMEAS Zeta Synchro Bedienungsanleitung

DROMEAS

DROMEAS Vip Bedienungsanleitung

DROMEAS

DROMEAS Smart Bedienungsanleitung

DROMEAS

DROMEAS Vip Bedienungsanleitung

DROMEAS

DROMEAS Vip Bedienungsanleitung

DROMEAS

DROMEAS Apollo Bedienungsanleitung

DROMEAS

DROMEAS Apollo Bedienungsanleitung

DROMEAS

DROMEAS ONE Bedienungsanleitung

DROMEAS

DROMEAS Smart Bedienungsanleitung

DROMEAS

DROMEAS Reflex Bedienungsanleitung

DROMEAS

DROMEAS Apollo Bedienungsanleitung

DROMEAS

DROMEAS Alma HT Bedienungsanleitung

DROMEAS

DROMEAS ERMIS Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung