DS18 CANDY-X1B Bedienungsanleitung

MONOBLOCK SUBWOOFER / STEREO FULL RANGE CLASS D AMPLIFIERS

owner’s manual

candy-x1b / x2b/ x4b / x5b / xxl1b

Congratulations on purchasing this DS18 CANDY-X Class D

Amplifier. The amplifier has been designed using the latest electronic

technology available, allowing you to produce high quality stereo

playback in mobile applications. This system provides you with low

harmonic distortion, a considerable amount of reserve voltage and

high temperature stability.

owner’s manual

INSTRUCTIONS FOR FUNCTIONS AND CONTROLS

candy-x1b / XXL1B

1210 11 13 14 15

1. HIGH INPUT: High level input terminals.

2. LOW INPUT: Left and right channels inputs of the amplifier system. Preamplifier outputs of a source

(head unit) or of an external crossover must be connected to them.

3. GAIN: Knob for volume adjusment.

4. BASS BOOST: The boost ranges from 0dB to 18dB

5. BOOST FREQUENCY: The boost frequency ranges from 40Hz to 100Hz.

6. LPF: Low pass frequency adjusting knob, the frequency ranges from 50hz to150Hz.

7. PHASE CONTROL: Phase adjusting switch, the phase ranges from 0-180o

8. REMOTE CONTROLLER OUTLET: To be connected with the remote controller, which helps to boost the

gain. Please turn the knob of volume to be maximum before using the remote.

9. REMOTE CONTROLLER: Volume level knob.

10. INDICATOR LIGHT: When power LED sends out blue light, it means that this amplifier have been

working now. When the LED sends out red light, it means that the self-protection of the amplifier.

11. GND: Ground terminal. Connect to the car chassis. Keep the lenght of the ground cable to a minimum.

12. REM: Terminal to be connected with the remote cable, which comes from the source and which

controls the amplifier switching on. Applied voltage must be between 10 and 15V DC.

13. +12V: anode of power connection terminals. Connect to the anode of car battery.

14. FUSE: standard automatic fuse, you must use the same power fuse if you need to change it.

15. SPEAKER: speaker connecting terminals.

XXL1B*

SYSTEM WIRING: 2 SPEAKER CONFIGURATION

candy-x1b / XXL1B

owner’s manual

XXL1B*

SYSTEM WIRING: SINGLE SPEAKER CONFIGURATION

candy-x1b / XXL1B

XXL1B*

1. HIGH INPUT: High level input terminals.

2. LOW LEVEL OUTPUT: A daisy chain output for connection to another amplifier with a low level input

using only a single RCA output from the source (head unit).

LOW LEVEL INPUT: For connection to any source (head unit) with a low level output. This is your RCA

output from the source (head unit).

3. GAIN: Knob for volume adjusment.

4. BASS BOOST: The boost ranges from 0dB to12dB

5. HPF: High pass frequency adjusting knob, the frequency ranges from 40 Hz to 250 Hz.

6. LPF: Low pass frequency adjusting knob, the frequency ranges from 50hz to150Hz.

7. X-OVER: Optional switches for high pass filter (HPF)/ full pass filter (FULL)/ low pass filter (LPF).

8. INDICATOR LIGHT: When power LED sends out blue light, it means that this amplifier have been

working now. When the LED sends out red light, it means that the self-protection of the amplifier.

9. GND: Ground terminal. Connect to the car chassis. Keep the lenght of the ground cable to a minimum.

10. REM: Terminal to be connected with the remote cable, which comes from the source and which

controls the amplifier switching on. Applied voltage must be between 10 and 15V DC.

11. +12V: anode of power connection terminals. Connect to the anode of car battery.

12. FUSE: standard automatic fuse, you must use the same power fuse if you need to change it.

13. SPEAKER: speaker connecting terminals.

INSTRUCTIONS FOR FUNCTIONS AND CONTROLS

candy-x2b

owner’s manual

108 9 11 12 13

SYSTEM WIRING: 2 CHANNELS STEREO CONFIGURATION

candy-x2b

SYSTEM WIRING: BRIDGED MODE CONFIGURATION

owner’s manual

candy-x2b

1. HIGH INPUT: High level input terminals.

2. LOW INPUT: CH1/CH2/CH3/CH4 inputs of the amplifier system. Preamplifier outputs of a source (head

unit) or of an external electronic crossover must be connected to them.

3. GAIN: Knob for volume adjusment.

4. BASS BOOST: The boost ranges from 0dB to 12dB

5. HPF: High pass frequency adjusting knob, the frequency ranges from 40 Hz to 250 Hz.

6. LPF: Low pass frequency adjusting knob, the frequency ranges from 40hz to250Hz.