DSC Power 832 PC5010 Bedienungsanleitung

Code Changes

Access Codes

Access codes are used to arm and disarm the system. There are 32 access codes available: 1 master code, 32

regular access codes, 2 duress codes and 2 partition master codes. Ask your installer for more information on

using the duress and partition master codes.

Only the Master Code can be used to program additional security codes and to change other system fea-

tures as well as to arm and disarm the security system. The Master Code will be supplied to you by your

installer. All keypad entries are made by pressing one key at a time.

NOTE: An access code can be a four or six digit number depending on how your installer has programmed

your system. Ask your installer for more information regarding access codes.

Programming Security Codes

Programming codes from an LED or LCD5501Z Keypad:

The Master Code

To program the Master Code, enter [*][5][current Master Code][40][new Master Code]. The Master Code must

be four digits unless otherwise indicated by your installer. Enter digits 0 through 9 only.

Press [#] 3 times to return to the Ready state.

Be sure to record your new Master Code on the “System Information” page in this booklet.

NOTE: We recommend that the factory default Master Code [1234] not be used.

Additional Codes

Up to 36 additional codes may be programmed. Codes 01-32 are regular access codes. Codes 33 and 34 are

duress codes. Codes 41 and 42 are the partition 1 and partition 2 master codes, respectively.

To program a new code:

Enter [*][5][Master code][code number][new access code]. The code number is a double-digit number from

01-34 or 41-42.

Access codes must be four digits long. Enter digits 0 through 9 only.

To exit code programming, press [#] 3 times.

If an access code already exists for the code number you have selected, it will be replaced by the new code.

To erase a code:

Enter [*][5][Master code][code number][*]. To exit code programming, press [#] 3 times.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere DSC Sicherheitssystem Handbücher

DSC

DSC Impassa WT4989 Bedienungsanleitung

DSC

DSC Envoy NT9005 V1.0 Betriebsanleitung

DSC

DSC neo HS2016 Bedienungsanleitung

DSC

DSC neo HS2032 Bedienungsanleitung

DSC

DSC PC1555MX Bedienungsanleitung

DSC

DSC PC15OO Bedienungsanleitung

DSC

DSC ESCORT558O Bedienungsanleitung

DSC

DSC Power Series Bedienungsanleitung

DSC

DSC PC2525 Bedienungsanleitung

DSC

DSC Power832 Bedienungsanleitung

DSC

DSC PC-LINK9 Bedienungsanleitung

DSC

DSC PC500 Bedienungsanleitung

DSC

DSC PG4975 Handbuch

DSC

DSC PC1550 Bedienungsanleitung

DSC

DSC WLS929 Bedienungsanleitung

DSC

DSC Envoy NT9010 v1.0 Betriebsanleitung

DSC

DSC ALEXOR Gebrauchsanweisung

DSC

DSC PowerSeries PC1404 V1.1 Bedienungsanleitung

DSC

DSC Neo Power HS2016 Bedienungsanleitung

DSC

DSC PC 5010 Bedienungsanleitung

DSC

DSC neo HS2016 Bedienungsanleitung

DSC

DSC Power608 Bedienungsanleitung

DSC

DSC Impassa PT4 Bedienungsanleitung

DSC

DSC tyco WP8360 Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung