DSPPA P.A. Series Bedienungsanleitung

P.A. SERIES

MIXING AMPLIFIER MP200PIII

MP300PIII

MP600PIII

MP1000PIII

MIC1 VOL MIC2 VOL MIC3 VOL AUX1 VOL AUX2 VOL

OFFON

ON 108

LEVELMETER

MIN MAX

MIC1

TREBLEBASS

TONE

MIX AMPLIFIER MP600PIII

MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX

O W N E R ’ S M A N U A L

Before operating, please read this manual carefully.

FEATURES

Three microphone inputs, two auxiliary inputs, and one AUX output for link.

Transformer for the speaker outputs at 100V, 70V and P1.

Muting function.

Individual volume control.

Low and high tone control.

A five-element LED level meter is provided for the quick and easy visual monitoring

of sound level.

The protection and alarm in case of output short-circuit.

This page is left blank for the user’s notes.

FRONT PANEL

1 LED power indicator 6 MIC volume control

For main power. Adjust microphone volume.

2 Power switch 7 AUX volume control

For main power. Adjust AUX input volume.

3 LED level meter 8 MIC1 input jack

Indicate output level. Connect to microphone of unbalanced

4 Bass control 30-600Ω with 1/4”phone plug.

Adjust bass response. The muting function is activated

5 Treble control while the signal is sent to MIC1.

Adjust treble response.

Note: When all the five elements of the LED level meter remain lit, it indicates that the

sound is distorted. In such a case, adjust each volume controlling button, until LED

element 4 (+8dB) and LED element 5(+10dB) shall flash.

REAR PANEL

MUTE

OUT

INPUT

MIC2 MIC3 AUX2AUX1

MAX MIN

MP200PIII.MP3 00PIII

SERIES M IXING AMPLIFIER

SER.

NO.

AUDIO OUTPUTS

COM P1 70V 100V

广州市迪士普音响科技有限公司

Guangzhou DSPPA Audio Co.,Ltd.

Nur Sicherung 25 0V

Use On ly With A 250V Fuse

Emplo yer Unlqueme nt Avec

F usible De 250V

1 2 3 4 5678

请勿打开，以免触电

RISK O F ELE CTRIC SH OCK

DO NOT OP EN

警告

CAUTION!

F A

~220V/50Hz/2A

带前置广播功放

F2AL250V

MP200P IIIDSPPA

F A

MP300P III

P1 16V 22V

FUSE TYPE/保险丝规格

F4AL250V

1 Mute control 4 AUX output

Adjust muting function. Connect to amplifier.

2 MIC2 input & MIC3 input 5 Output terminals

Connect to the microphones at unbalanced Connect to speakers.

30-600Ω with 1/4 phone plug. 6 AC power connector

The signals from MIC2 and MIC3 will Connect to AC power source.

be muted by the signal from MIC1. 7 AC fuse

3 AUX1 input & AUX2 input Prevent the excessive AC current flow.

Connect to auxiliary source equipment. 8 Fan intake window

Note: When connecting to speakers, use one pair of speaker output terminals only.

MIC1 VOL MIC2 VOL MIC3 VOL AUX1 VOL AUX2 VOL

OFFON

ON 108

LEVELMETER

MIN MAX

MIC1

TREBLEBASS

TONE

MIX AMPLIFIER MP600PIII

MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX

1 2 3 4 5678

Connections

MUTING FUNCTION

This model provides muting function. The inputs from Mic2, Mic3,Aux 1 and Aux 2 are

automatically muted by the input from Mic1, as the signal from Mic1 overrides other input

signals. The level of MUTE can be adjusted within the range from MAX to MIN by

adjusting MUTE control button on the

rear panel. It is preset at MAX

before shipping from the factory.

MUTE

MAX MIN

Priority MIC

or Chairman’s MIC

100V COM AUX OUT AUX2 AUX1 MIC3 MIC2

DECK

TUNER

MIC1 VOL MIC2 VOL MIC3 VOL AUX1 VOL AUX2 VOL

OFFON

ON 108

LEVELMETER

MIN MAX

MIC1

TREBLEBASS

TONE

MIX AMPLIFIER MP600PIII

MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX

AMP.

PRECAUTION OF INSTALLATIOM

1. Do not block ventilation holes.

2. Do not use this unit if the electrical power cord is frayed or broken.

3. The amplifier should not be placed in any of the areas:

1) with poor ventilation;

2) with high humidity or heavy dust;

3) exposed to direct sunlight;

4) with high ambient temperature or adjacent to heat-generating

equipment;

5) susceptible to vibration.

4. Always operate the unit with the AC ground wire connected to the

electrical system’s ground.

5. Make sure the power outlet conforms to the plug of the unit.

6. If an alarm rings after the power has been on and the signal has been

fed, there must be an output short-circuit trouble. In such case,

please cut the power off. Do not power on until the

trouble has been resolved.

Packing List

No.

Specification

Quantity

SY542 wire (AV terminal audio cable)

1 piece

Output terminal fuse holder

1 piece

Power cord

1 piece

Warranty card

1 copy

Certificate

1 copy

User manual

1 copy

Whole machine fixing screw /5×19

4 pieces

Handle

2 pieces

M3×8 cross recessed countersunk head screw

8 pieces

Plastic washer

4 pieces

SPECIFICATIONS

Model

MP200PIII

MP300PIII

MP600PIII

MP1000PIII

Rated output power

60W

120W

250W

350W

Output regulation

≤3dB (from full load to off-load)

Speaker output

P1, 70V, 100V at rated voltage

AUX output

≥700 mV

Input sensitivity

Microphone :≤3.3mV (unbalanced)

Line:≤300mV (unbalanced)

Frequency response

80Hz-16KHz (±3dB)

THD

≤1% （1KHz，normal operating status）

SNR

Line: ≥74dB (broadband)

Tone

Bass : ±10dB(100Hz)

Treble : ±10dB(10kHz)

Protection

AC fuse; DC voltage; overload; short-circuit.

Muting function

Mic 1 overrides other input signals with

0-( -30 )dB attenuation

Power requirements

AC 220V/50Hz

Rated power consumption

120W

250W

500W

650W

Outer Packing Size (mm)

(L×W×H) 520×430×195

Unit Size (mm)

(L×W×H) 483×338×88

Gross weight

10.3kg

10.8kg

14.8kg

15.2kg

Net weight

8.5kg

9kg

13kg

13.4kg

Specifications are subject to change without notice

CAUTION

●When the “Power switcher” is off, please pull out the power cord from the socket.

Please keep the equipment out of water.

●To reduce the risk of electric shock, do not remove the cover.

●No user parts inside. Refer servicing to qualified service personnel.

●The symbol on rear panel indicates hazardous live. The connection of these terminals must be

operated by the instructed person.

●The unit connect to the mains by the plug. Pull out the plug when the unit is in fault or danger

status. So the socket for the unit plugging must be set in the place can be easy to plug into and pull

out the plug.

Guangzhou DSPPA Audio Co., Ltd.

Andere Handbücher für P.A. Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere DSPPA Verstärker Handbücher

DSPPA

DSPPA Mini40 Bedienungsanleitung

DSPPA

DSPPA MX1000II Bedienungsanleitung

DSPPA

DSPPA MP 200P II Bedienungsanleitung

DSPPA

DSPPA MP7806 Bedienungsanleitung

DSPPA

DSPPA MK6906 Bedienungsanleitung

DSPPA

DSPPA MP7812 Bedienungsanleitung

DSPPA

DSPPA PC2200 Bedienungsanleitung

DSPPA

DSPPA MP6425 Bedienungsanleitung

DSPPA

DSPPA MP9920S Bedienungsanleitung

DSPPA

DSPPA MP600PIII Bedienungsanleitung

DSPPA

DSPPA P.A. Series Bedienungsanleitung

DSPPA

DSPPA P.A.SERIES MP 1600 Bedienungsanleitung

DSPPA

DSPPA MP60U Bedienungsanleitung

DSPPA

DSPPA DA2125 Bedienungsanleitung

DSPPA

DSPPA MP60B Bedienungsanleitung

DSPPA

DSPPA MP9312U Bedienungsanleitung

DSPPA

DSPPA DA3350 Bedienungsanleitung

DSPPA

DSPPA MP35H Bedienungsanleitung

DSPPA

DSPPA MAG6806 Technisches Handbuch

DSPPA

DSPPA Mini60 Bedienungsanleitung

DSPPA

DSPPA MP 210P Bedienungsanleitung

DSPPA

DSPPA MP6906 Bedienungsanleitung

DSPPA

DSPPA MP260U Bedienungsanleitung

DSPPA

DSPPA ADR6435 Bedienungsanleitung

Beliebte Verstärker Handbücher anderer Marken

ASTRO

ASTRO HVO V40 P Bedienungsanleitung

Marantz

Marantz SUPERSCOPE BLA-545 Montageanleitung

NAD

NAD CI980 Bedienungsanleitung

Technics

Technics SE-CH770 Bedienungsanleitung

Harman Kardon

Harman Kardon HK6300 Bedienungsanleitung

NAD

NAD T975 Bedienungsanleitung

McIntosh

McIntosh MA6850 Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Bedienungsanleitung

Viatron

Viatron Autrix Bedienungsanleitung

GME

GME GA9800 Bedienungsanleitung

Atlas

Atlas CP700 Bedienungsanleitung

Roland

Roland KC-1000 Bedienungsanleitung

Pyle

Pyle PFMRA350BW Bedienungsanleitung

Advantage

Advantage S-250 Bedienungsanleitung

IRT Electronics

IRT Electronics DVA-3007 Bedienungsanleitung

Dimavery

Dimavery BA-100 Series Bedienungsanleitung

Sony

Sony XM-S400D Bedienungsanleitung

Schertler

Schertler ROY X Bedienungsanleitung