DSPPA CM10 Bedienungsanleitung

SPECIFICATION

ITEM PARAMETERS

MIC output voltage 600mV±10mV or 20mV±10%(unbalanced)

Chime output voltage 600mV±10mV or 20mV±10%

Chime sort CHIME UP：1-3-5-і-

CHIME DOWN：i-5-3-1-

Frequency range

100Hz-15kHz

Distortion

MIC：≤1%

Dimension（L×W×H

）

190×136×44mm

Net Weight

1.2kg

CM10

Paging Microphone

OWNER’S MANUAL

Thank you for purchasing PA Microphone. All products have been tested strictly before

shipping. This PA Microphone is widely used in building, school, conference room, etc.

It’s the most ideal choice of you! In order to facilitate installing, modulating and running

please read this manual carefully before setup.

Features

Easy to use in different sites

CAUTION

To reduce the risk of electric shock, do not remove the cover。

No user parts inside. Refer servicing to qualified service personnel.

Plug & play function

Function with output voltage select

Turn on & off chime function

Adjustable chime volume

Front Panel

1. Chime 1 with note1-3-5- і2. Chime 2 with note і-5-3-1

3. MIC on indicator 4. Power on indicator

5. MIC off key 6. MIC

Back Panel

7. 220V power cord 8. Power fuse

9. Power switch 10. Chime volume knob

11. MIC volume knob 12. Used to select the output

13. Output port level switch

OPERATION

1．Link output port on unit’s back panel with line input port on Pre

amplifier or power amplifier. Then select the microphone and the

bell of the output voltage, provide two voltage options: 600mV

and 20mV.

600mV for the microphone connected to the amplifier’s line input.

20mV for the microphone connected to the amplifier’s MIC input.

2．Connect AC220V power supply, then switch on power button on

back panel. Power indicator will be on in red.

3．Press the key chime 1, chime rings with note 1-3-5- іand MIC

indicator is on in yellow. MIC is in ‘turn-on’ status.

4．Press the key chime 2, chime rings with note і-5-3-1 and MIC

indicator is off. MIC is in ‘turn-off’ status.

5. Press the MIC off key, MIC indicator is off and MIC is in ‘turn-off’

status.

6. Chime volume and MIC volume can be adjusted through the knob

9 and 10 on back panel. The volume increase when clockwise

turns the knob.

7. The microphone will automatically turn off, if no input signal to

or without any action on its within 10 minutes.

1 2

10 13

11 12

Andere DSPPA Mikrofon Handbücher

DSPPA

DSPPA PAVA9008 Bedienungsanleitung

DSPPA

DSPPA MAG2588 Bedienungsanleitung

DSPPA

DSPPA MAG6588 Bedienungsanleitung

DSPPA

DSPPA DM30 Bedienungsanleitung

DSPPA

DSPPA D6234 Bedienungsanleitung

DSPPA

DSPPA MP135M Bedienungsanleitung

DSPPA

DSPPA MAG6284 Bedienungsanleitung

DSPPA

DSPPA CB100 Bedienungsanleitung

DSPPA

DSPPA D6225 Bedienungsanleitung

DSPPA

DSPPA D6243 Bedienungsanleitung

Beliebte Mikrofon Handbücher anderer Marken

IK Multimedia

IK Multimedia iRig Stream MIC PRO Bedienungsanleitung

DAPAudio

DAPAudio RM-101 Bedienungsanleitung

AKG

AKG CHM 21 Bedienungsanleitung

Sennheiser

Sennheiser evolution wireless series EM 100 Bedienungsanleitung

Sony

Sony C-48 Bedienungsanleitung

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG Bedienungsanleitung

Shure

Shure WH30TQG Bedienungsanleitung

auna PRO

auna PRO MIC-900 Bedienungsanleitung

AKG

AKG D 3800 Bedienungsanleitung

Shure

Shure KSM141 Bedienungsanleitung

MAIIN SOUND

MAIIN SOUND IIN style Bedienungsanleitung

Earthworks

Earthworks TC25 Bedienungsanleitung

Alesis

Alesis MicLink Wireless Bedienungsanleitung

Monacor

Monacor IMG STAGELINE ECM-300B Bedienungsanleitung

Ansr Audio

Ansr Audio Scan16 Bedienungsanleitung

Shure

Shure MXA710 Series Bedienungsanleitung

Sennheiser

Sennheiser evolution D1 Bedienungsanleitung

JLab

JLab GO TALK Bedienungsanleitung