Amplifier Output, Antenna
Cassette in-wall installation
Cassette size:（L×W×H）172×86×55mm
○
1Install cassette and wiring
○
2Turn off power supply（Push the switch to right）
○
3Connect to wiring terminal
○
4Use screws to fix bottom box to Cassette
Note: Push the switch
to the right (turn off)
○
6Half install panel and test
○
5Install the button battery in panel
Half install panel to the bottom box→ Turn on power
（Push the switch to left）→Functional test
Half install: 2mm space
between panel and
bottom box
Pull out the panel horizontally
Open the middle button with thumb or other objects
(not sharp) slide from upper left corner gap to right,
open the rest buttons by slide along the gap. You will
hear a sound like ‘Click’ when each button is opened.
1. Pull out the panel horizontally after open all the buttons.
Thumb slide along the gap in
circle
○
7Fastening the panel after test is ok and
Installation is complete
Panel and bottom
box fix completely
