DTS NICK NRG 501 Bedienungsanleitung

D.T.S. Illuminazione srl

info@dts-lighting.it http://www.dts-lighting.it

Via Fagnano Selve 10/12/14

47843 MisanoAdriatico (RN) ITALIATel +39 0541 611131 Fax +39 0541 611111 Made in Italy

Le informazioni contenute in questo documento sono state attentamente redatte e

controllate. Tuttavia non è assunta alcuna responsabilità per eventuali inesattezze.

Tutti i diritti sono riservati e questo documento non può essere copiato, fotocopiato,

riprodotto per intero o in parte senza previo consenso scritto della D.T.S .

D.T.S. si riserva il diritto di apportare senza preavviso cambiamenti e modifiche

estetiche , funzionali o di design a ciascun proprio prodotto. D.T.S non assume alcuna

responsabilità sull’uso o sull’applicazione dei prodotti o dei circuiti descritti.

The information contained in this publication has been carefully prepared and

checked. However, no responsibility will be taken for any errors. All rights are

reserved and this document cannot be copied, photocopied or reproduced, in part or

completely, without prior written consent from D.T.S.

D.T.S. reserves the right to make any aesthetic, functional or design modifications to

any of its products without prior notice. D.T.S. assumes no responsibility for the use or

application of the products or circuits described herein.

Les informations contenues dans le présent manuel ont été rédigées et contrôlées

avec le plus grand soin. Nous déclinons toutefois toute responsabilité en cas

photocopié ou reproduit, dans sa totalité ou partiellement, sans le consentement

préalable de D.T.S.

D.T.S. se réserve le droit d'apporter toutes modifications et améliorations esthétiques,

fonctionnelles ou de design, sans préavis, à chacun de ses produits. D.T.S. décline

toute responsabilité sur l'utilisation ou sur l'application des produits ou des circuits

décrits.

Las informaciones contenidas en este documento han sido cuidadosamente

redactadas y controladas. Con todo, no se asume ninguna responsabilidad por

eventuales inexactitudes. Todos los derechos han sido reservados y este documento

no puede ser copiado, fotocopiado o reproducido, total o parcialmente, sin previa

autorización escrita de D.T.S.

D.T.S. se reserva el derecho a aportar sin previo aviso cambios y modificaciones de

carácter estético, funcional o de diseño a cada producto suyo. D.T.S. no se asume

responsabilidad de ningún tipo sobre la utilización o sobre la aplicación de los

productos o de los circuitos descritos.

INDEX:

1- SYMBOLS 4

2- GENERAL WARNING 4

3- GENERAL WARRANTY CONDITION 4

4- TECHNICAL FEATURES 5

5- TECHNICAL SPECIFICATIONS 7

6- ACCESSORIES 7

7- IMPORTANT SAFETY INFORMATION 8

7.1 Fire prevention

7.2 Prevention of electric shock

7.3 Safety

7.4 Level of protection against the penetration of solid and liquid objects

8- VOLTAGE AND FREQUENCY 9

9- INSTALLATION 9

9.1 Safety cable

9.2 Protection against liquids

9.3 Movement

9.4 Risk of fire

9.5 Forced ventilation

9.6 Ambient temperature

10- MAINS CONNECTION 11

10.1 Protection

11- DMX SIGNAL CONNECTION 12

11.1 DMX Addresses

11.2 Selecting the DMX address

12- FIRMWARE UPDATING 13

13- DISPLAY FUNCTIONS 14

14- PERIODIC CLEANING 23

15- PERIODIC CONTROLS 23

16- DMX PROTOCOL 24

1- SYMBOLS

Graphic symbols used on this manual

THIS SYMBOL INDICATES A HOT SURFACE

THIS SYMBOL INDICATES ELECTRIC SHOCK

RISK

THIS SYMBOL INDICATES GENERAL RISK

THIS SYMBOL MEANS “DO NOT PLACE THE

UNIT ON INFLAMMABLE SURFACES”

THIS SYMBOL INDICATES THE MINIMUM

DISTANCE TO BE KEPT BETWEEN THE DEVICE

AND THE LIT OBJECT

2- GENERAL WARNING

Read the instruction contained in this user manual carefully, as they give important

information regarding safety during installation , use and maintenance.

The device is not for domestic use and must be installed by a qualified electrician or

experienced person.

Always disconnect the device from the mains before maintenance.

The device must always be equipped with an efficient ground connection.

3- GENERAL WARRANTY CONDITIONS

The unit is guaranteed for 36 months from the date of purchase against manufacturing

material defects.

0,5M

4- TECHNICAL FEATURES

NICK NRG 501 is an high-efficiency LED moving head wash light which employs a

new-generation optical group.

The remarkable brightness / consumption ratio makes NICK NRG 501 a truly “green”

fixture.

NICK NRG 501 is equipped with 7 high-power Full-colour LEDs (RGBW).

NICK NRG 501 features 3,5° - 52° motorized zoom (from very concentrated beams to

large wall washes) - and ultra-fast silent Pan/Tilt.

NICK NRG 501 is also available with the “FPR” system (patent pending), which

enables limitless pan rotation in both directions, with no need for inversion.

Applications

NICK NRG 501 is suitable for top professional applications, such as television, tours

and special events.

Product codes

03.LDR009.F NICK NRG 501 FULLCOLOR BLACK ZOOM

03.LDR009.FFP NICK NRG 501 FULLCOLOR FPR BLACK ZOOM

LED Technology

* 7 Full Colour LEDs (RGBW)

Optical group

* 3,5°- 52° linear motorized zoom with high-efficiency optical system

* Uniform projection on surfaces, from very wide Wash to PC Beam

Colour generation

* 16 million colours

* Wide palette of pure uniform whites with variable

linear colour temperature (2700°K –8000°K)

Interface / Control / Programming

* Multi-function OLED graphic colour display + 4 soft keys:

control / management / monitoring of the main parameters

* Controlled via DMX 512 and RDM standard digital communication protocols

* Wireless ready

* Internal operating system updatable via D.T.S. RED BOX interface and “D.T.S.

firmware upgrade utility” program on windows based PC

DMX

20 DMX channels

Pan & Tilt

NICK NRG 501 FPR (Cod. 03.LDR009.FFP)

* ‘FPR’: limitless pan rotation, in either direction, never having to reverse motion

Tilt 270° (1,2 sec.)

NICK NRG 501 (Cod. 03.LDR009.F)

* Ultra-fast movement: Pan 540° (2 sec.); Tilt 270° (1,2 sec.)

* 16-bit movement resolution

* Selectable speed ranges

Power supply

* Electronic full-range AC 90-260 V 50 / 60 Hz

* Power consumption: 125W

Connectors

* DMX: 4 XLR connectors (3-pole In and Out; 5-pole In and Out) by Neutrik;

* Power supply: POWERCONN In/Out (re-launch) connectors by Neutrik.

Operating ambient temperature

-10° / 40°

Weight

8,9 Kg

International certifications

Certification CE; LED Class: Class 2 LED product

5- TECHNICAL SPECIFICATIONS

Dimensions

Packaging Dimensions (LxWxH)

470 x 370 x 510 mm

Weight: 11 Kg

Unit Dimensions (LxWxH)

306x220x435 mm

Weight: 8,9 Kg

6- ACCESSORIES

As standard

• 1 x POWERCONN male cable connector (cod. 0520P014)

•1 x XLR 5 Pins male cable connector (cod. 0508B028)

•1 x XLR 5 Pins female cable connector (cod. 0508B027)

• “C” Clamp GQUICK with “Fast Lock” connection 1/4 turn (cod. 0521A014)

• User’s manual

Optional (on request)

Flight case

• Professional Flight case for 6 units; compartment for accessories, swivel wheels,

cover with hinges with-stay, dishes on cover for piling, 8 handles (2 eachside) (cod.

0521C062.1)

Wireless DMX receiver retrofit

• Wireless DMX Receiver Card with INDOOR IP20 omni. 2dBi antenna included

(cod.03.LA.126)

Clamps / safety wires

• “C” Clamp G60 black (max. load 50Kg) (cod. 0521A004)

• “C” Clamp G60 chrome (max. load. 50Kg) (cod. 0521A004.20)

• “C” Clamp GQUICK with “Fast Lock” connection 1/4 turn (max. load. 80Kg) (cod.

0521A014)

• “C” Clamp G100 black / professional (max. load. 200Kg) (cod. 0521A015)

• Omega clamp with “Fast Lock” connection 1⁄4 turn 1 couple (2 pieces) (Cod.

02K00467)

• Safety wire (3mm x 60 cm), ring spring catch, max. capacity load 60Kg (cod.

0521A010)

296 mm

7- IMPORTANT SAFETY INFORMATION

7.1 Fire prevention:

-Never locate the fixture on any flammable surface.

-Minimum distance from flammable materials: 1 MT.

-Minimum distance from the closest illuminable surface: 0,5 MT.

-Replace any blown or damaged fuses only with those of identical value.

Refer to the wiring diagram if there is any doubt.

-Connect the projector to mains power via a thermal magnetic circuit breaker.

7.2 Prevention of electric shock:

-High voltage is present inside the unit. Unplug the unit prior to performing any

function which involves touching the inside of the moving head.

-The level of technology inherent in the NICK NRG 501 requires the assistance of

specialised personnel for all servicing.

Please refer to an authorised D.T.S. service centre.

-A good earth connection is essential for proper functioning of the projector.

-Never connect the unit without proper earth connection.

-The fixture should be located in places with a good air ventilation.

7.3 Safety:

-The projector should always be installed with bolts, clamps and other tools that are

capable of supporting the weight of the unit.

-Always use a second safety cable to sustain the weight of the unit in case of the

failure of the main fixing point.

-The external surface of the unit, at various points, may exceed 70°C. Never handle

the unit until at least 10 minutes have elapsed since the projector was turned off.

-Never install the fixture in an enclosed area lacking sufficient air flow.

The ambient temperature should not exceed 40°C.

7.4 Level of protection against the penetration of solid and liquid objects:

-The projector is classified as an ordinary appliance and its protection level against the

penetration of solid and liquid objects is IP 20.

0,5M

8- VOLTAGE AND FREQUENCY

The NICK NRG 501 can operate at 90-260 VOLT 50 or 60 Hz.

9- INSTALLATION

NICK NRG 501 may be either floor or ceiling mounted.

For floor mounting installations, the NICK NRG 501 is supplied with four rubber

mounting feet on the base.

For ceiling mounted installations, we reccomend the use of appropriate clamps to fix

the unit to the mounting surface.

The supporting structure from which the unit is hung should be capable of bearing the

weight of the unit, as should any clamps used to hung it. The structure should also be

sufficiently rigid so as not to move or shake whilst the NICK NRG 501 is moving.

Four 1/4 turn Fast Locks connections placed in the base of the unit allow to hang the

NICK NRG 501 by using the Fast Lock “C” clamps provided in the box.

9.1- Safety cable

We recommend the use of a safety cable or chain connected to the NICK NRG 501

and to the suspension truss in order to avoid the fixture accidentally falling should the

main fixing point fail.

Make sure that the iron cable or chain can bear the weight of the entire unit.

You may attach the safety chain/cord to the attachment point (A) located on the base

of the fixture, as shown in the picture below.

SAFETY CHAIN/CORD

ATTACHMENT POINT

9.2 Protection against liquids

The projector contains electric and electronic components which should under no

circumstances come into contact with oil, water or any other liquid.

The proper unit functioning would be compromised should this occur.

9.3- Movement

NICK NRG 501 FPR (Cod. 03.LDR009.FFP)

Unlimited Pan rotation; Tilt 270° (1,2 sec.)

NICK NRG 501 (Cod. 03.LDR009.F)

Ultra-fast movement: Pan 540° (2,0 sec.); Tilt 270° (1,2 sec.)

DO NOT place any obstructions in the path of the projector's movement.

WARNING

Do not place any object in the

path of the projector’s

movement

Free Pan Rotation (‘FPR’) No ‘FPR’

(Cod. 03.LDR009.FFP) (Cod. 03.LDR009.F)

9.4- Risk of fire

Each fixture produces heat and must be installed in a well-ventilated place.

The minimum recommended distance from flammable material is 1 MT.

Minimum distance from the object being illuminated is 0,5 MT.

9.5- Forced ventilation

You will note, on inspection, that the unit features various air inlets and cooling fans.

These should, under no circumstances, be blocked or obstructed whilst the projector is

in operation. Doing so could cause the fixture to seriously overheat thereby

compromising its proper operation.

9.6- Ambient temperature

The projector should never be installed in places that lack a constant air flow.

The ambient temperature should NOT exceed 40°C.

0,5M

540°

270° 270°

FPR

Andere Handbücher für NICK NRG 501

Inhaltsverzeichnis

Andere DTS Leuchte Handbücher

DTS

DTS DIVE 6 Bedienungsanleitung

DTS

DTS XR9 Spot Bedienungsanleitung

DTS

DTS DELTA 12 HEAD Bedienungsanleitung

DTS

DTS MOVIELIGHT Bedienungsanleitung

DTS

DTS ALCHEMY 3 Bedienungsanleitung

DTS

DTS VICE R Bedienungsanleitung

DTS

DTS XR8 WASH Bedienungsanleitung

DTS

DTS XR300 BEAM Bedienungsanleitung

DTS

DTS XR8 SPOT Bedienungsanleitung

DTS

DTS XR 8 Wash Bedienungsanleitung

DTS

DTS XR4 SPOT Bedienungsanleitung

DTS

DTS XR-LASER GREEN Bedienungsanleitung

DTS

DTS SCENA LED 200 MZ FC Bedienungsanleitung

Beliebte Leuchte Handbücher anderer Marken

Emos

Emos CLASSIC ZY1431T Bedienungsanleitung

Westinghouse

Westinghouse Outdoor Lighting Fixture Bedienungsanleitung

Hedler

Hedler C 12 silent Bedienungsanleitung

Blizzard Lighting

Blizzard Lighting Puck: CSI Bedienungsanleitung

Energetic Lighting

Energetic Lighting ELYSL-5004 Series Bedienungsanleitung

Lightmaxx

Lightmaxx Shaft 5R Bedienungsanleitung

Triarch

Triarch 31083 Bedienungsanleitung

Philips

Philips 32614 Series Bedienungsanleitung

IKEA

IKEA TIVED Bedienungsanleitung

Lightolier

Lightolier LP200 Bedienungsanleitung

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH Bedienungsanleitung

Martin

Martin MAC 250 Krypton Bedienungsanleitung

Cooper Lighting

Cooper Lighting Halo L3232E Bedienungsanleitung

Stageline

Stageline ODW-2410RGBW Bedienungsanleitung

Light Sky

Light Sky Tornado Series Bedienungsanleitung

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U Bedienungsanleitung

Lightolier

Lightolier Lytespan 83ED17S Bedienungsanleitung

Lightolier

Lightolier Calculite CS8226 Bedienungsanleitung