Dual Inventive ZKL 3000 RC Bedienungsanleitung
Quick Start
ZKL 3000 RC
MTinfo 3000 version 5
February 2020
Before you start!
•ZKL 3000 RC
•Manual and ZKL 3000 RC accessories
•Certificate ZKL 3000 RC
•MTinfo 3000 app
*
Inhoud
1. Function test before you start
2. Installation in the track
3. Operating the MTinfo 3000 app
A Logging in
B Selecting a project
C Switching on
D Switching off
4. Icons, statuses and errors
A Icons
B Statuses
C Errors
1
2
3
4
d
d
*What you will need!
Function test before you start
1
Installation in the track
d
CCheck the status of the ZKL 3000 RC in
the MTinfo 3000 app or on mtinfo3000.com
Install both batteries
A
Place the test tool and install both batteries to
perform the function test.
!
Operate the key switch as follows
B
Make sure the green LED blinks twice per
second during the first two steps!
!
turn it
clockwise
turn it counter-
clockwise
Function test before you start
Installation in the track
2
Operating the MTinfo 3000 app
Place the ZKL 3000 RC in the track
B
Make sure the distance between the underside of
the ZKL 3000 RC and any ballast is at least 30mm.
!
Install the locking clamp
C
Operate the key switch as follows
Place the key switch in the ON position whilst installing
the ZKL and pay attention to the main battery cable.
A
Perform the function test again, see steps 1B
and 1C
D
turn it
clockwise
Installation in the track
Operating the MTinfo 3000 app
3
Selecting a project
B
Logging in
A
Switching on
C
Successfully switched on
Successfully switched on
The green LED will blink
twice per second.
!
Successfully switched off
Switching off
Operating the MTinfo 3000 app
3
D
Successfully switched off
Icons, statuses and errors
Operating the MTinfo 3000 app
Icon Explanation
View the notifications that have been sent by
MTinfo 3000
Refresh the screen
4
Icons, statuses and errors
Icons
A
[ID] [SW] [DET] Explanation
110.0199 ON OK Device has been switched on and
is creating a proper short.
110.0199 ON NOK Device has been switched on and
is NOT creating a proper short.
110.0199 OFF NOK Device has been switched off and is
therefore not creating a proper short.
110.0199 - - Device is not available.
Statuses
B
Andere Handbücher für ZKL 3000 RC
3
Inhaltsverzeichnis
Andere Dual Inventive Steuerungssystem Handbücher
