Dubaco DS-800BT Bedienungsanleitung

DS-800(BT)
Pocket-size Wireless Scanner
User’s Manual

Table of Contents
Memory Mode ---------------------------------------------------------------------------3
BT Local name---------------------------------------------------------------------------3
Bluetooth mode configuration------------------------------------------------------4
Remote Mac Address------------------------------------------------------------------5
Pin Code-----------------------------------------------------------------------------------5
Bluetooth parameter configuration by software-----------------------------6
USB-HID / USB-COM Mode----------------------------------------------------------6
Memory Mode Setting-----------------------------------------------------------------7
Ext Transmission Delay-------------------------------------------------------------10
Lamp OFF Delay-----------------------------------------------------------------------10
Standby Time---------------------------------------------------------------------------11
Separator---------------------------------------------------------------------------------11
Bluetooth Mode Setting-------------------------------------------------------------12
Lamp OFF Delay-----------------------------------------------------------------------12
Connect OFF Time--------------------------------------------------------------------14
Standby Time---------------------------------------------------------------------------14
Time out----------------------------------------------------------------------------------15
Grneral Configuration Setting----------------------------------------------------17
USB-HID Keyboard Type-----------------------------------------------------------17
Transmission Gap--------------------------------------------------------------------18
Transmission Delay------------------------------------------------------------------19
Timeout----------------------------------------------------------------------------------20
Keyboard Layout Setting----------------------------------------------------------21
Bluetooth HID Dongle Keyboard Layout Setting--------------------------22
Virtual COM Type---------------------------------------------------------------------23
Time out----------------------------------------------------------------------------------23
Transmission Gap---------------------------------------------------------------------24
Transmission Delay--------------------------------------------------------------------25
System Control------------------------------------------------------------------------26
Trigger Mode-------------------- -------------------------------------------------------28
Buzzer----------------- -------------------------------------------------------------------29
Beep Volume-----------------------------------------------------------------------------29
Beep Tone-------------------------------------------------- ------------------------------30
Beep Time -------------------------------------------------------------------------------31
Standby Time---------------------------------------------------------------------------32
LED OFF Delay-------------------------------------------------------------------------33
Lamp OFF Delay-----------------------------------------------------------------------34
Good Read Time-----------------------------------------------------------------------35
Setup Timeout--------------------------------------------------------------------------36
Vibrator OFF Delay--------------------------------------------------------------------37
Double Confirm------------------------------------------------------------------------38
Global Min. / Max. Length-----------------------------------------------------------39
Global Min. Length---------------------------------------------------------------------39
Global Max. Length -------------------------------------------------------------------40
Set Data & Time-----------------------------------------------------------------------41
Symbology Settings-----------------------------------------------------------------42
UPC-A--------------- --------------------------------------------------------------------43
UPC-E---------------- -------------------------------------------------------------------44
EAN-13-----------------------------------------------------------------------------------46
EAN-8-------------------------- ----------------------------------------------------------48
Code-39------------------------------------------------------- --------------------------50
Codabar / NW7--- ---------------------------------------------------------------------52
Code-128---------------------------------------------------------------------------------54
Interleaved 2 of 5 ---------------------------------------------------------------------56

Industrial 2 of 5----- -------------------------------------------------------------------57
Matrix 2 of 5---- ------------------------------------------------------------------------58
Code 93------ -------------------- -------------------------------------------------------59
Code 11-- ------------ -------------------------------------------------------------------60
MSI / Plessey---------------------------------------------------------------------------61
UK / Plessey --------------------------------------------- -----------------------------62
Telepen-----------------------------------------------------------------------------------63
RSS (GS1 DataBar) 14---------------------------------------------------------------64
RSS (GS1 DataBar) Limited--------------------------------------------------------65
RSS (GS1 DataBar) 14 Stack-------------------------------------------------------66
RSS (GS1 DataBar) Expansion----------------------------------------------------67
RSS (GS1 DataBar) Expansion Stack ------------------------------------------68
Output Format Settings-------------------------------------------------------------69
Transmission Preamble---------------------------------------------------------------69
Transmission Postamble -------------------------------------------------------------69
Preamble Data--------------------------------------------------------------------------70
Postamble Data ------------------------------------------------------------------------71
Prefix / Suffix---------------------------------------------------------------------------72
Prefix Data-------------------------------------------------------------------------------72
Suffix Data ---------- --------------------------------------------------------------------73
Code ID / Sub Code ID--------------------------------------------------------------74
Code ID Setting------------------------------------------------------------------------74
Wait Add-On Count------- ----------------------------------------------------------76
Min. / Max. Length---------------------------------------- ---------------------------77
Min. Length------------------------------------------------------------------------------77
Max. Length -----------------------------------------------------------------------------79
Truncate Zero--------------------------------------------------------------------------81
Truncate Leading ---------------------------------------------------------------------86
Truncate Ending-----------------------------------------------------------------------89
Insert 0 Position---------------- ------------------------------------------------------92
Insert 1 Position -----------------------------------------------------------------------95
Insert 0 Data----- -----------------------------------------------------------------------98
Insert 1 Data -------------------------------------------- ------------------------------101
Hexadecimal / Decimal Table----------------------------------------------------104
ASCII Code Table--------------------------------------------------------------------105

Memory Mode
Switch from Bluetooth to Memory Mode
Send
Connect the USB cable between scanner
and PC, and scan the below “Send” barcode.
Clear
Clear all barcode data in the memory
Bluetooth mode configuration
Enter
End
Mode
Slave Mode : Third party Bluetooth devices ( Mode:0)
Master Mode - Third party Bluetooth devices (Mode:1)
Econnect Bluetooth dongle Mode I (Mode:2)
HID Mode - For third party Bluetooth devices (Mode:3)
iPad OSK MODE (Mode selection code:4)
Econnect Bluetooth dongle Mode II (Mode:5)
OK
BT Local name
Enter
BT Local name
OK
End
Set Local name as ‘BT Scanner’
(A) Scan “BT Module Enter” barcode
(B) Scan “BT Local name” barcode
(C) Scan parameters from Hexadecimal / Decimal
barcode table =>“4”,”2”,
“5”,”4”, “2”,”0”, “5”,”3”, “6”,”3”, “6”,”1”, “6”,”E”, “6”,”E”,
“6”,”5”, “7”,”2”→”OK”(configured as ‘BT Scanner’,
Please refer to ASCII TABLE)
(D) Scan “End” Barcode
3 4

Remote Mac Address
Enter
Remote Mac Address
OK
End
Set Remote Mac Address to 00126F006EAA
A. Scan “BT Module Enter” barcode
B. Scan “Remote Mac Address” barcode
C. Scan parameters from Hexadecimal /decimal
barcode table =>“0”, “0”,“1”,”2”, “6”,”F”, “0”,”0”,
“6”,”E”, “A”,”A”→”OK” (Set “Remote Mac Address
“ value to 00126F006EAA)
D. Scan “End” barcode
Pin Code
Enter
Pin Code
OK
End
Set Pin Code to 5678
(A) Scan “BT Module Enter” Barcode
(B) Scan “Pin Code” Barcode
(C) Scan parameters from Hexadecimal/Decimal
table =>“5”,”6”, “7”,”8”→”OK”
(Set “Pin Code “ value to 5678)
(D) Scan “End” Barcode
Bluetooth parameter configuration by software
Enter
ISP
Connect scanner with PC by USB cable, and
set the scanner to ISP mode.
Scan the below barcodes step by step to set the
scanner to ISP mode.
USB-HID / USB-COM Mode
Enter
USB-HID
USB-COM
Before scan the barcode, make sure the
scanner and the Bluetooth
Dongle is in paired status.
5 6

Memory Mode Setting
Enter
Header Transmission
Disabel
*Enabel
Date & Time Transmission
Disabel
*Enabel
Reject Same
End
*Disabel
Enabel
Good Read Beep
Disabel
*Enabel
Good Read Vibrator
*Disabel
Enabel
Time Format
*hh:mm:ss
hh:mm
7 8

Date Format
*yyyy/mm/dd
mm/dd/yyyy
yy/mm/dd
mm/dd/yy
yyyy-mm-dd
mm-dd-yyyy
yy-mm-dd
mm-dd-yy
dd/mm/yyyy
dd/mm/yy
dd-mm-yyyy
dd-mm-yy
Enter
End
Ext Transmission Delay
This configuration enables the delay time (time gap) setting in between
each barcode data sending to PC.
(1) Enter
(2) Ext Transmission Delay barcode
(3) Scan parameters from Hexadecimal /
Decimal table
(Range:0~250 = 0~2.5sec)
(4) OK
(5) End
Lamp Off Delay
The configuration enables the setting of duration time of scanner LED
power off.
(1) Enter
(2) Lamp Off Delay barcode
(3) Scan parameters from Hexadecimal /
Decimal table
(Range:0~255 = 0~255sec)
(4) OK
(5) End
9 10

Standby Time Bluetooth Mode Setting
This configuration enables the time configuration for the main power
switching off after scanner LED turned off.
(1) Enter
(2) Standby Time barcode
(3) Scan parameters from Hexadecimal /
Decimal table
(Range:0~99 = 0~99sec)
(4) OK
(5) End
Separator
This configuration enables separator setting in between date, time and
barcode data. In order for the date and time to be display in front of each
barcode data, Date & time transmission must be enabled.
(1) Enter
(2) Separator barcode
(3) Scan parameters from Hexadecimal /
Decimal table
(Max:1digit)
(4) OK
(5) End
BT List
Enter
List
User can simply understand their Bluetooth
parameter setting by scanning the following
barcode, and use the notepad to receive the
Bluetooth parameter configuration data.
BT Default Setting
Enter
Default
User can restore the default setting for the
Bluetooth Parameter.
The configuration enables the setting of duration time of scanner LED
power on and off
Lamp Off Delay
(1) Enter
(2) Lamp Off Delay barcode
(3) Scan parameters from Hexadecimal /
Decimal table
(Range:0~255 = 0~255sec)
(4) OK
(5) End
12 11

Enter
End
Good Read Beep
*Enabel
Disabel
Good Read Vibrator
Enabel
*Disabel
The vibration configuration if barcode reading
is successfully decoded. Note:Vibration
function is only available for the scanner with
vibrator installed.
Connect Off Time
(1) Enter
Under the Bluetooth mode, when the Bluetooth connection is
established while the scanner is not working. This configuration enables
to set the duration of scanner sleep time. (Note: Default value is 6 as
60 seconds)
(2) Connect Off Time barcode
(3) Scan parameters from Hexadecimal /
Decimal table
(Range:0~255 = 0~42Min 30sec)
(4) OK
(5) End
Standby Time
This configuration enables the time configuration for the main power
switching off after scanner LED turned off.
(1) Enter
(2) Standby Time barcode
(3) Scan parameters from Hexadecimal /
Decimal table
(Range:0~99 = 0~99sec)
(4) OK
(5) End
Data & Time Transmission
*Enabel
Disabel
Under Bluetooth mode, user can enabled/
disable the time stamp function in front of the
barcode data.
Time Format
*hh:mm:ss
hh:mm
Time format configuration, in order for the time
stamp to be display in front of each barcode
data, Date and Time Transmission must be
enabled and configure the following formats:
13 14

Timeout
The timeout setting for the handshaking acknowledgment from the host
PC, if scanner did not receive acknowledgement from the host PC, the
warning sound will be active. This function is particular useful for some
applications which host PC takes longer response time.
(1) Enter
(2) Timeout barcode
(3) Scan parameters from Hexadecimal /
Decimal table
(Range:0~99 = 0~99sec)
(4) OK
(5) End
Enter
End
Date Format
*yyyy/mm/dd
mm/dd/yyyy
yy/mm/dd
mm/dd/yy
yyyy-mm-dd
mm-dd-yyyy
yy-mm-dd
mm-dd-yy
dd/mm/yyyy
dd/mm/yy
dd-mm-yyyy
dd-mm-yy
16 15
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Dubaco Barcode-Lesegerät Handbücher
Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro
POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

Marson
Marson MT780 Kurzanleitung zur Einrichtung

NCR
NCR RealPOS Bedienungsanleitung

Motorola
Motorola SE3300 Kurzanleitung zur Einrichtung

Element
Element P130BT Bedienungsanleitung

Motorola
Motorola Symbol LS3008 Installations- und Betriebshandbuch












