Dukane ImagePro 8781 Bedienungsanleitung

Portable LCD Projector

Model 8781

USER’S MANUAL

#080006

ENGLISH

Projector

8781

User's Manual (concise)

Thank you for purchasing this projector.

WARNING ►Before using this product, be sure to read all manuals for this

product. See “Using the CD manual” (15) to read the manuals in the CD.

After reading them, store them in a safe place for future reference.



Contents of package........................... 1

Preparations ....................................... 2

Fastening the lens cover................................. 2

Loading batteries into the remote control........ 2

Arrangement....................................... 3

Connecting your devices .................... 4

Using a USB storage ...................................... 6

Using an SD card............................................ 6

Connecting power supply ................... 7

Turning on the power.......................... 7



Adjusting the projector’s elevator ....... 8

Displaying the picture ......................... 9

Turning off the power........................ 10

Replacing the lamp........................... 11

Cleaning and replacing the air lter.. 13

Replacing the internal clock battery.. 14

Using the CD manual ....................... 15

Regulatory notices............................ 16

Specications ................................... 18

Warranty and after-service ............... 19

Contents

Contents of package

Your projector should come with the items

shown below. Check that all the items are

included. Contact to your dealer immediately

if any items are missing.

(1) Remote control with two AA batteries

(2) Power cord

(3) RGB cable

(4) Audio/Video cable

(5) Lens cover and Strap

Lens cover is attached to the projector.

(6) User’s manuals (Book x1, CD x1)

(7) Soft case

(8) Security label

(9) Wireless network card (SD card)

(10) Slot cover lock

(11) Application CD

NOTE • Keep the original packing materials for future reshipment. Be sure

to use the original packing materials when moving the projector. Use special

caution for the lens.

(1)

(2)

(3)

(4)

(6)

(7)

(8)

(5)

HOME

PAGE UP

PAGE DOWN

END

VIDEO SEARCH

FREEZE

OFF

MAGNIFY

ASPECT AUTO BLANK

MUTE

VOLUME

KEYSTONE

MY BUTTON

POSITION

1 2

ESC

ENTER

RESET

COMPUTER

(9) (10) (11)

Fastening the lens cover

To avoid losing the lens cover, please fasten the lens cover

to the projector using the enclosed strap.

1. Fix the strap to the strap hole of the lens cover.

Thread one end of the strap through the strap hole of

the lens cover and make the loop at the end, and let the

other end of the strap through the loop. Not have a knot

in the strap at either end.

2. Fix the strap to the strap hole of the projector. Thread

the other end of the strap through the strap hole of the projector and make

the loop there. Let the lens cover with the one end of strap through the loop.

Preparations

Loading batteries into the remote control

Please set the batteries to the remote control before using it. If the remote control

starts to malfunction, try to replace the batteries. If you will not use the remote

control for long period, remove the batteries from the remote control and store

them in a safe place.

1. Holding the hook part of the battery

cover, remove it.

2. Align and insert the two AA batteries

(HITACHI MAXELL, Part No.LR6 or R6P)

according to their plus and minus terminals

as indicated in the remote control.

3. Replace the battery cover in the direction

of the arrow and snap it back into place.

WARNING ►Always handle the batteries with care and use them only as

directed. Improper use may result in battery explosion, cracking or leakage,

which could result in re, injury and/or pollution of the surrounding environment.

• Be sure to use only the batteries specied. Do not use batteries of different

types at the same time. Do not mix a new battery with used one.

•

Make sure the plus and minus terminals are correctly aligned when loading a battery.

• Keep a battery away from children and pets.

• Do not recharge, short circuit, solder or disassemble a battery.

•

Do not allow a battery in a re or water. Keep batteries in a dark, cool and dry place.

•

If you observe battery leakage, wipe out the leakage and then replace a battery.

If the leakage adheres to your body or clothes, rinse well with water immediately.

•

Obey the local laws on disposing the battery.

ENGLISH

Screen size

(diagonal)

4 : 3 screen 16 : 9 screen

Projection distance Screen

height

Screen

height

Projection distance Screen

height

Screen

height

min. max. min. max.

inch m m inch m inch cm inch cm inch m inch m inch cm inch cm inch

30 0.8 0.9 35 1.1 43 41 16 5 2 1.0 39 1.2 47 39 15 -1 0

40 1.0 1.2 47 1.4 57 55 22 6 2 1.3 52 1.6 62 51 20 -2 -1

50 1.3 1.5 59 1.8 71 69 27 8 3 1.6 65 2.0 78 64 25 -2 -1

60 1.5 1.8 71 2.2 86 82 32 9 4 2.0 78 2.4 94 77 30 -2 -1

70 1.8 2.1 83 2.5 100 96 38 11 4 2.3 91 2.8 109 90 35 -3 -1

80 2.0 2.4 95 2.9 115 110 43 12 5 2.6 104 3.2 125 103 41 -3 -1

90 2.3 2.7 107 3.3 129 123 49 14 5 3.0 117 3.6 141 116 46 -4 -1

100 2.5 3.0 119 3.6 144 137 54 15 6 3.3 130 4.0 156 129 51 -4 -2

120 3.0 3.6 143 4.4 172 165 65 18 7 4.0 156 4.8 188 154 61 -5 -2

150 3.8 4.6 179 5.5 216 206 81 23 9 4.9 195 6.0 235 193 76 -6 -2

200 5.1 6.1 239 7.3 288 274 108 30 12 6.6 261 8.0 314 257 101 -8 -3

250 6.4 7.6 299 9.1 360 343 135 38 15 8.3 326 10.0 392 322 127 -10 -4

300 7.6 9.1 359 11.0 432 411 162 46 18 9.9 391 12.0 471 386 152 -12 -5

On a horizontal surface

Suspended from the ceiling

• Keep a space of 30 cm or more between

the sides of the projector and other objects

such as walls.

•

Consult with your dealer before a special

installation such as suspending from a ceiling.

WARNING ►Install the projector in a stable horizontal position.

►

Place the projector in a cool place, and ensure that there is sufcient ventilation.

►Do not place the projector anyplace where it may get wet.

CAUTION ►Avoid placing the projector in smoky, humid or dusty place.

►Position the projector to prevent light from directly hitting the projector’s

remote sensor.

abc1

c1 c2 c2

Arrangement

Refer to the illustrations and tables below to determine screen size and projection distance.

The values shown in the table are calculated for a full size screen: 1024×768

a Screen size (diagonal)

b Projection distance (±10%)

c1 , c2 Screen height (±10%)

RGB IN

AUDIO IN

Y Cb/PbCr/Pr

COMPONENT VIDEO OUT

L R

AUDIO OUT VIDEO OUT L R

AUDIO OUT

L R

AUDIO OUT S-VIDEO OUT

AUDIO OUT RGB OUT

AUDIO OUT

USB

RGB OUT

RS-232C

Connecting your devices

Be sure to read the manuals for devices before connecting them to the projector.

Make sure that all the devices are suitable to be connected with this product, and

prepare the cables required to connect. Please refer to the following illustrations

to connect them.

VCR/DVD

player

Speakers

PC Monitor

(continued on next page)

ENGLISH

WARNING ►Do not disassemble or modify the projector and accessories.

►Be careful not to damage the cables, and do not use damaged cables.

CAUTION ►Turn off all devices and unplug their power cords prior to

connecting them to projector. Connecting a live device to the projector may

generate extremely loud noises or other abnormalities that may result in

malfunction or damage to the device and the projector.

►Use appropriate accessory or designated cables. Ask your dealer about non-

accessory cables which may be required a specic length or a ferrite core by

the regulations. For cables with a core only at one end, connect the end with

the core to the projector.

►Make sure that devices are connected to the correct ports. An incorrect

connection may result in malfunction or damage to the device and the projector.

Connecting your devices (continued)

To use MIU (Multi Information processing Unit) function, please connect at least

one of the devices drawn in the following illustration to the projector.

SD CARD

LAN

(continued on next page)

SD card

USB storage

Connecting your devices (continued)

WARNING ►Do not disassemble or modify the projector and accessories.

► Do not touch the SD card while being accessed.

CAUTION ►The designated wireless network card is required to use the

wireless network function of this projector.

►The wireless network card is not permitted to be sold or used in some

countries and regions. Use the card only in the country or region where you buy

it. For more information, contact to your dealer.

NOTE •

When using the projector with a wired LAN, please remove the wireless network card.

Using a USB storage

In order to view images stored in a USB storage, such as a USB memory, insert the device

into the USB STORAGE slot.

Before removing the USB storage, be sure to perform the REMOVE MEDIA procedure

using the PC-LESS PRESENTATION menu under the MIU menu.

Using an SD card

In order to view images stored in an SD storage,

such as an SD memory card, insert the device

into the SD card slot. Or, in order to use the

wireless network function, load the internal clock

battery (14) and insert the designated wireless

network card into the SD card slot.

Inserting the SD card

1. Make sure that the power code is not plugged into the projector for the wireless

network card only.

2. Remove the SD card slot cover. To remove it, it might be recommended to hook the

edge of its side face upward.

3. Slowly insert the SD card completely into the SD card slot. Make sure that the angled

corner of the SD card is placed into the right side of the SD card slot, while inserting.

4. Replace the SD card slot cover. It is recommended that the cover is slid sideways to

the projector.

Using the slot cover lock for security

Using the enclosed slot cover lock can prevent the SD card slot cover from being opened.

1. Open the two plates of the slot cover lock to put the tips of two plates together, and

then insert the tips to the lock hole of the SD card slot cover.

2. Put the body of the two plates together. Then, hook a padlock or combination lock to

the hole of the slot cover lock.

Removing the SD card

1. Perform the REMOVE MEDIA procedure using the PC-LESS PRESENTATION menu

under the MIU menu for SD Storage card only.

2. Turn the projector off and unplug the power code from the projector for the wireless

network card only.

3. Remove the SD card slot cover. After taking the SD card away, replace the SD card

slot cover.

SD card slot cover

SD CARD SD CARD

Slot cover lock

ENGLISH

HOME

PAGE UP

PAGE DOWN

END

VIDEO SEARCH

FREEZE

OFF

MAGNIFY

ASPECT AUTO BLANK

MUTE

VOLUME

KEYSTONE

MY BUTTON

POSITION

1 2

ESC

ENTER

RESET

COMPUTER

Connecting power supply

1. Put the connector of the power cord into the

AC inlet of the projector.

2. Firmly plug the power cord’s plug into the

outlet.

WARNING ►Please use extra caution when connecting the power cord, as

incorrect or faulty connections may result in re and/or electrical shock.

• Only use the power cord that came with the projector. If it is damaged, contact

to your dealer to newly get correct one.

• Only plug the power cord into an outlet whose voltage is matched to the power

cord. The power outlet should be close to the projector and easily accessible.

Remove the power cord for complete separation.

• Never modify the power cord.

AC inlet Power cord

Turning on the power

1. Make sure that the power cord is rmly and

correctly connected to the projector and the

outlet.

2. Remove the lens cover, and set the power

switch to the ON position (marked “׀”).

3. Press the STANDBY/ON button on the

projector or the remote control.

The projection lamp will light up and the POWER

indicator will begin blinking in green. When the

power is completely on, the indicator will stop

blinking and light in steady green.

WARNING ►

A strong light is emitted when the projector’s power is on. Do not look into

the lens of the projector or look inside of the projector through any of the projector’s openings.

STANDBY/ON button

POWER indicator

Power switch

NOTE • Please power on the projector prior to the connected devices.

• When the AUTO ON of the OPTION menu is set to the TURN ON, and the

power was turned off by the power switch last time, turning the power switch on

makes the projection lamp light on without pushing the STANDBY/ON button.

For more information, please see the “Operating Guide” in the CD.

Adjusting the projector's elevator

When the place to put the projector is slightly uneven to

the left or right, use the elevator feet to place the projector

horizontally.

Using the feet can also tilt the projector in order to project at a suitable angle to

the screen, elevating the front side of the projector within 10 degrees.

This projector has 2 elevator feet and 2 elevator buttons. An elevator foot is

adjustable while pushing the elevator button on the same side as it.

1. Holding the projector, push the elevator buttons to loose the elevator feet.

2. Position the front side of the projector to the desired height.

3. Release the elevator buttons in order to lock the elevator feet.

4. After making sure that the elevator feet are locked, put the projector gently.

5. If necessary, the elevator feet can be manually twisted to make more precise

adjustments. Hold the projector when twisting the feet.

To loose an elevator foot, push the

elevator button on the same side as it.

CAUTION ►Do not handle the elevator buttons without holding the

projector, since the projector may drop down.

►Do not tilt the projector other than elevating its front within 10 degrees using

the adjuster feet. A tilt of the projector exceeding the restriction could cause

malfunction or shortening the lifetime of consumables, or the projector itself.

To nely adjust, twist the foot.

10°

ENGLISH

Displaying the picture

1. Activate your signal source. Turn the signal

source on, and make it send the signal to

the projector.

2. To adjust volume, use the ▲/▼ cursor

buttons after pressing the VOLUME button

on the remote control.

To have the projector silent, press the MUTE

button on the remote control.

3. Press the INPUT button on the projector.

Each time you press the button, the

projector switches its input port in turn.

You can also use the remote control to

select an input signal. Press the VIDEO

button for selecting an input signal from the

COMPONENT (Y, Cb/Pb, Cr/Pr), VIDEO

or S-VIDEO port, or the COMPUTER

button for selecting an input signal from the

COMPUTER IN1, COMPUTER IN2 or MIU.

4. Press the ASPECT button on the remote

control. Each time you press the button,

the projector switches the mode for aspect

ratio in turn.

5. Use the zoom ring to adjust the screen

size.

6. Use the focus ring to focus the picture.

INPUT button

VOLUME button

MUTE button

▲ cursor button

▼ cursor button

HOME

PAGE UP

PAGE DOWN

END

VIDEO SEARCH

FREEZE

OFF

MAGNIFY

ASPECT AUTO BLANK

MUTE

VOLUME

KEYSTONE

MY BUTTON

POSITION

1 2

ESC

ENTER

RESET

COMPUTER

VIDEO button

COMPUTER button

ASPECT button

NOTE • The ASPECT button does not work when no proper signal is inputted.

• For the details of how to adjust the picture, please see the “Operating Guide”

in the CD.

Focus ring

Zoom ring

HOME

PAGE UP

PAGE DOWN

END

VIDEO SEARCH

FREEZE

OFF

MAGNIFY

ASPECT AUTO BLANK

MUTE

VOLUME

KEYSTONE

MY BUTTON

POSITION

1 2

ESC

ENTER

RESET

COMPUTER

Andere Handbücher für ImagePro 8781

Inhaltsverzeichnis

Andere Dukane Projektor Handbücher

Dukane

Dukane 8755N Bedienungsanleitung

Dukane

Dukane 8788 Bedienungsanleitung

Dukane

Dukane 9136 Bedienungsanleitung

Dukane

Dukane ImagePro 68100WUSS-B Bedienungsanleitung

Dukane

Dukane ImagePro 8421A Bedienungsanleitung

Dukane

Dukane ImagePro 8913-W Bedienungsanleitung

Dukane

Dukane 6528 Bedienungsanleitung

Dukane

Dukane 28A8910 Bedienungsanleitung

Dukane

Dukane ImagePro 8105H Bedienungsanleitung

Dukane

Dukane 8934 Bedienungsanleitung

Dukane

Dukane 8963 Bedienungsanleitung

Dukane

Dukane ImagePro 8913-W Bedienungsanleitung

Dukane

Dukane ImagePro 8913 Bedienungsanleitung

Dukane

Dukane ImagePro 8070 Bedienungsanleitung

Dukane

Dukane 28A9115 Bedienungsanleitung

Dukane

Dukane 8975WUA Bedienungsanleitung

Dukane

Dukane 8755L-RJ Bedienungsanleitung

Dukane

Dukane ImagePro 8077A Bedienungsanleitung

Dukane

Dukane ImagePro 8784 Bedienungsanleitung

Dukane

Dukane 8755G-RJ Bedienungsanleitung

Dukane

Dukane ImagePro 8062 Bedienungsanleitung

Dukane

Dukane ImagePro 8774 Bedienungsanleitung

Dukane

Dukane 6650HDSS Bedienungsanleitung

Dukane

Dukane ImagePro 8764 Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung