Duluth Forge FDSR25 Technisches Datenblatt

VENT-FREE GAS STOVE

OWNER’S OPERATION AND

INSTALLATION MANUAL

MODELS

FDSR25 & FDSR25GF

PFS

WARNING: If the information in this manual is not

followed exactly, a re or explosion may result causing

property damage, personal injury or loss of life.

— Do not store or use gasoline or other ammable va-

pors and liquids in the vicinity of this or any other

appliance.

— WHAT TO DO IF YOU SMELL GAS

• Do not try to light any appliance.

• Do not touch any electrical switch; do not use any

phone in your building.

•

Immediately call your gas supplier from a neighbor’s

phone. Follow the gas supplier’s instructions.

• If you cannot reach your gas supplier, call the re

department.

—

Installation and service must be performed by a quali-

ed installer, service agency or the gas supplier.

WARNING: This appliance is equipped for natural and

propane gas. Field conversion is not permitted other than

between natural or propane gases.

Questions, problems, missing parts? Before returning to your retailer, call

our customer service department at 1-855-607-6557, 8:00 am - 4:30 pm EST,

Monday through Friday or email info@factorybuysdirect.com

www.factorybuysdirect.com 200257-01A

TABLE OF CONTENTS

Safety ........................................................ 3

Specications ............................................ 4

Qualied Installing Agency ........................ 5

Product Features....................................... 5

Local Codes............................................... 5

Product Identication................................. 6

Unpacking.................................................. 6

Water Vapor: A By-Product Of

Unvented Room Heaters..................... 6

Air For Combustion and Ventilation ........... 7

Installation ................................................. 8

Operation................................................. 18

Inspecting Burners................................... 22

Care And Maintenance ............................ 23

Electrical.................................................. 24

Troubleshooting....................................... 26

Service Hints ........................................... 29

Technical Service..................................... 29

Accessories ............................................. 29

Parts ........................................................ 30

Replacement Parts.................................. 31

Warranty .................................................. 32

INSTALLER: Leave this manual with the appliance.

CONSUMER: Retain this manual for future reference.

This is an unvented gas-red stove. It uses air (oxygen)

from the room in which it is installed. Provisions for ad-

equate combustion and ventilation air must be provided.

Refer to Air For Combustion and Ventilation section on

page 7 of this manual.

WARNING: Improper installation, adjustment, al-

teration, service or maintenance can cause injury or

property damage. Refer to this manual for correct in-

stallation and operational procedures. For assistance

or additional information consult a qualied installer,

service agency or the gas supplier.

This appliance may be installed in an aftermarket,* per-

manently located, manufactured (mobile) home, where

not prohibited by local codes.

This appliance is only for use with propane or natural

gas. Field conversion by any other means including the

use of a kit is not permitted.

* Aftermarket: Completion of sale, not for purpose of resale, from the manufacturer.

SAVE THIS BOOK

PATENT INFORMATION

This product may be covered by one or more of the following United States patents:

8,915,239 8,851,065 8,764,436 8,757,202 8,757,139 8,752,541 8,568,136

8,545,216 8,517,718 8,516,878 8,506,290 8,465,277 8,317,511 8,297,968

8,281,781 8,241,034 8,235,708 8,152,515 8,011,920 7,967,006 7,967,007

7,654,820 7,730,765 7,677,236 7,607,426 7,434,447

www.factorybuysdirect.com

200257-01A

SAFETY

IMPORTANT: Read this owner’s

manual carefully and completely

before trying to assemble,

operate, or service this stove.

Improper use of this stove can

cause serious injury or death

from burns, fire, explosion,

electrical shock and carbon

monoxide poisoning. Failure

to follow these instructions will

void the warranty.

Only a qualied installer, service

agent, or local gas supplier may

install and service this product.

WARNING: Keep the appli-

ance area clear and free from

combustible materials, gasoline,

and other ammable vapors and

liquids.

WARNING: This appliance

can be used with propane or

natural gas. It is shipped from

the factory adjusted for use with

propane.

DANGER: Carbon monoxide

poisoning may lead to death!

CARBON MONOXIDE POISONING: Early

signs of carbon monoxide poisoning resemble

the u, with headaches, dizziness or nausea.

If you have these signs, the stove may not be

working properly. Get fresh air at once! Have

stove serviced. Some people are more af-

fected by carbon monoxide than others. These

include pregnant women, people with heart or

lung disease or anemia, those under the inu-

ence of alcohol and those at high altitudes.

NATURAL AND PROPANE/LP GAS: Natural

and Propane/LP gas are odorless. An odor-

making agent is added to the gas. The odor

helps you detect a gas leak. However, the

odor added to the gas can fade. Gas may be

present even though no odor exists.

WARNING: Any change to

this stove or its controls can be

dangerous.

WARNING: Do not allow fans

to blow directly into stove. Avoid

any drafts that alter burner ame

patterns.

WARNING: Do not use a

blower insert, heat exchanger

insert or other accessory not

approved for use with this stove.

WARNING: Due to high tem-

peratures, the appliance should

be located out of trafc and away

from furniture and draperies.

WARNING: Do not place

clothing or other flammable

material on or near the appli-

ance. Never place any objects

in the stove.

WARNING: The stove be-

comes very hot when operating.

Keep children and adults away

from hot surfaces to avoid burns

or clothing ignition. Stove will

remain hot for a time after shut-

down. Allow surfaces to cool

before touching.

WARNING: Carefully super-

vise young children when they

are in the room with the stove.

WARNING: You must oper-

ate this stove with the door and

screen in place.

www.factorybuysdirect.com 200257-01A

1. Do not place Propane/LP supply tank(s)

inside any structure. Propane/LP supply

tank(s) must be placed outdoors.

2. This stove shall not be installed in a bed-

room or bathroom.

3. This stove needs fresh air ventilation to

run properly. This stove has an Oxygen

Depletion Sensing (ODS) safety shutoff

system. The ODS shuts down the stove if

not enough fresh air is available. See Air

for Combustion and Ventilation, pages 7.

If stove keeps shutting off, see Trouble-

shooting, page 26.

4. Keep all air openings in front and bottom

of stove clear and free of debris. This will

ensure enough air for proper combustion.

5. If stove shuts off, do not relight until you

have provided fresh, outside air. If stove

keeps shutting off, have it serviced.

6. Do not run stove:

• Where ammable liquids or vapors are

used or stored.

• Under dusty conditions.

7. Before using furniture polish, wax, carpet

cleaner, or similar products, turn stove off.

If heated, the vapors from these products

may create a white powder residue within

burner box or on adjacent walls or furni-

ture.

8. Do not use stove if any part has been

under water. Immediately call a qualied

service technician to inspect the room

stove and to replace any part of the control

system and any gas control which has

been under water.

SAFETY

9. Turn stove off and let cool before servic-

ing. Only a qualied service person should

service and repair stove.

10. Operating stove above elevations of 4,500

feet could cause pilot outage.

11. To prevent performance problems, do

not use propane/LP fuel tank of less than

100 lbs. capacity.

12. Do not use this stove as a wood-burning

stove. Use only the logs provided with the

stove.

13. Solid fuels should not be burned in a stove

in which a vent-free log set is installed. Do

not use this stove to cook food or burn

paper or other objects.

14. To prevent sooting, follow the instructions

in Care and Maintenance (see page 23).

15. Do not add extra logs or ornaments such

as pine cones, vermiculite, or rock wool.

Using these added items can cause soot-

ing. Do not add lava rock around base.

Rock and debris could fall into the control

area of stove. After servicing, always close

door before operating stove.

16. This stove is designed to be smokeless. If

logs ever appear to smoke, turn off stove

and call a qualied service person.

Note: During initial operation, slight smok-

ing could occur due to log curing and the

stove burning manufacturing residues.

17. Do not use this stove if any log is broken.

Do not operate stove if a log has a chip

(dime-sized of larger).

SPECIFICATIONS

Gas Type Natural Gas Propane Gas

Input Rating 26,000 Btu/Hr 26,000 Btu/Hr

Ignition Electronic Piezo Electronic Piezo

Regulator Pressure Setting 4" W.C. 9" W.C.

Inlet Gas Pressure* (inches of water)

(*for purposes of input adjustment)

Maximum 9" Maximum 14"

Minimum 5" Minimum 11"

Stove Dimensions (HxWxD) •

26.125" × 28" × 16.875"

Carton Dimensions (HxWxD) •

31.125" × 31.375" × 20.5"

Stove Weight • 73 lbs Shipping Weight • 85 lbs

120 Volts • 19 Watts

www.factorybuysdirect.com

200257-01A

QUALIFIED INSTALLING AGENCY

Only a qualied agency should install and

replace gas piping, gas utilization equipment

or accessories, and repair and equipment ser-

vicing. The term “qualied agency” means any

individual, rm, corporation, or company that

either in person or through a representative

is engaged in and is responsible for:

a) Installing, testing, or replacing gas piping

b) Connecting, installing, testing, repairing,

or servicing equipment; that is experienced

in such work; that is familiar with all precau-

tions required; and that has complied with

all the requirement of the authority having

jurisdiction.

PRODUCT FEATURES

SAFETY PILOT

This stove has a pilot with an Oxygen Deple-

tion Sensing (ODS) safety shutoff system.

The ODS/pilot shuts off the stove if there is

not enough fresh air.

PIEZO IGNITION SYSTEM

This stove is equipped with an electronic piezo

control system. This system requires one AAA

battery (provided).

THERMOSTATIC CONTROL

The control automatically cycles the burner

on and off to maintain a desired room tem-

perature.

2 GAS OPTIONS AVAILABLE

Your stove is equipped to operate on either

Propane/LP or Natural gas. The stove is

shipped from the factory ready for connect-

ing to Propane/LP. The stove can easily be

changed to Natural gas by having your quali-

ed installer follow the instructions on page

10 and the markings on the stove.

MANUAL OVERRIDE CONTROL

SYSTEM

This stove has two operation functions. Re-

mote Control and Manual Override Control.

The remote control has a transmitter, which

requires two AAA batteries and electric power

outlet to operate. In the event of a power

outage, you can operate the the stove by

manual override.

LOCAL CODES

Install and use stove with care. Follow all local

codes. In the absence of local codes, use the

latest edition of The National Fuel Gas Code,

ANSI Z223.1/NFPA 54*.

*Available from:

American National Standards Institute, Inc.

1430 Broadway

New York, NY 10018

National Fire Protection Association, Inc.

1 Batterymarch Park

Quincy, MA 02269-9101

This stove is designed for vent-free operation.

State and local codes in some areas prohibit

the use of vent-free stoves.

State of Massachusetts: The installation

must be made by a licensed plumber or

gas tter in the Commonwealth of Mas-

sachusetts.

Sellers of unvented propane or natural

gas-red supplemental room heaters shall

provide to each purchaser a copy of 527

CMR 30 upon sale of the unit.

In the State of Massachusetts the gas

cock must be a T-handle type. The State

of Massachusetts requires that a exible

appliance connector cannot exceed three

feet in length.

www.factorybuysdirect.com 200257-01A

WATER VAPOR: A BY-PRODUCT OF

UNVENTED ROOM HEATERS

Water vapor is a by-product of gas combus-

tion. An unvented room heater produces ap-

proximately one (1) ounce (30 mL) of water

for every 1,000 BTUs (0.3 KWs) of gas input

per hour. Unvented room heaters are recom-

mended as supplemental heat (a room) rather

than a primary heat source (an entire house).

In most supplemental heat applications, the

water vapor does not create a problem. In

most applications, the water vapor enhances

the low humidity atmosphere experienced

during cold weather.

The following steps will help ensure that water

vapor does not become a problem.

1. Be sure the heater is sized properly for the

application, including ample combustion

air and circulation air.

2. If high humidity is experienced, a dehu-

midier may be used to help lower the

water vapor content of the air.

3. Do not use an unvented room heater as

the primary heat source.

UNPACKING

1. Remove top inner pack.

2. Tilt carton so that stove is upright.

3. Remove protective side packaging.

4. Slide stove out of carton.

5. Remove protective plastic wrap.

Figure 1 - Vent-Free Stove

PRODUCT IDENTIFICATION

Logs

Screen

Stove Controls

(Inside Panel)

Stove Door

6. Rotate door handle and open door.

7. Carefully remove logs.

8. Carefully unwrap logs.

9. Check for any shipping damage. If stove

or log is damaged, contact our customer

service department.

www.factorybuysdirect.com

200257-01A

AIR FOR COMBUSTION AND VENTILATION

WARNING: This heater shall

not be installed in a conned

space or unusually tight con-

struction unless provisions are

provided for adequate combus-

tion and ventilation air. Read the

following instructions to insure

proper fresh air for this and other

fuel-burning appliances in your

home.

Today’s homes are built more energy efcient

than ever. New materials, increased insulation

and new construction methods help reduce

heat loss in homes. Home owners weather

strip and caulk around windows and doors

to keep the cold air out and the warm air in.

During heating months, home owners want

their homes as airtight as possible.

While it is good to make your home energy

efcient, your home needs to breathe. Fresh

air must enter your home. All fuel-burning ap-

pliances need fresh air for proper combustion

and ventilation.

Exhaust fans, replaces, clothes dryers and

fuel burning appliances draw air from the

house to operate. You must provide adequate

fresh air for these appliances. This will insure

proper venting of vented fuel-burning appli-

ances.

WARNING: This heater shall

not be installed in a room or

space unless the required vol-

ume of indoor combustion air

is provided by the method de-

scribed in the National Fuel Gas

Code, ANSI Z223.1/NFPA 54, the

International Fuel Gas Code, or

applicable local codes.

WARNING: Ifthearea inwhich

the heater may be operated does

not meet the required volume for

indoor combustion air, combus-

tion and ventilation air shall be

provided by one of the methods

described in the National Fuel

Gas Code,ANSI Z223.1/NFPA54,

the International Fuel Gas Code,

or applicable local codes.

VENTILATION AIR

Ventilation Air From Inside Building

This fresh air would come from an adjoining

unconned space. When ventilating to an

adjoining unconned space, you must provide

two permanent openings: one within 12" of the

ceiling and one within 12" of the oor on the

wall connecting the two spaces (see options

1 and 2, Figure 2). You can also remove door

into adjoining room (see option 3, Figure 4).

Follow the National Fuel Gas Code, ANSI

Z223.1/NFPA 54, Air for Combustion and

Ventilation for required size of ventilation

grills or ducts.

Figure 4 - Ventilation Air from Inside

Building

Remove

Door into

Adjoining

Room,

Option

Ventilation Grills

Into Adjoining Room,

Option 2

Ventilation

Grills Into

Adjoining

Room,

Option 1

12"

www.factorybuysdirect.com 200257-01A

Ventilation Air From Outdoors

AIR FOR COMBUSTION AND VENTILATION

Figure 5 - Ventilation Air from Outdoors

Provide extra fresh air by using ventilation

grills or ducts. You must provide two perma-

nent openings: one within 12" of the ceiling

and one within 12" of the oor. Connect these

items directly to the outdoors or spaces open

to the outdoors. These spaces include attics

and crawl spaces. Follow the National Fuel

Gas Code, ANSI Z223.1/NFPA 54, Air for

Combustion and Ventilation for required size

of ventilation grills or ducts.

IMPORTANT: Do not provide openings

for inlet or outlet air into attic if attic has a

thermostat-controlled power vent. Heated air

entering the attic will activate the power vent.

Rework worksheet, adding the space of the

adjoining unconned space. The combined

spaces must have enough fresh air to supply

all appliances in both spaces.

Outlet

Air

Ventilated

Attic

Outlet

Air

Inlet

Air

Inlet Air Ventilated

Crawl Space

Crawl

Space

To Attic

INSTALLATION

NOTICE: This stove is intended

for use as supplemental heat.

Use this stove along with your

primary heating system. Do not

install this stove as your primary

heat source. If you have a cen-

tral heating system, you may

run system’s circulating blower

while using stove. This will help

circulate the heat throughout the

house. In the event of a power

outage, you can use this stove

as your primary heat source.

WARNING: A qualied ser-

vice person must install stove.

Follow all local codes.

WARNING:ElectricalGround-

ing Instructions If using a blower,

this appliance is equipped with a

three-prong (grounding) plug for

your protection against shock

hazard and should be plugged

directly into a properly grounded

three-prong receptacle.

WARNING: Never install the

stove

• in a bedroom or bathroom

• in a recreational vehicle

• wherecurtains,furniture,cloth-

ing, or other ammable objects

are less than 48" from the front,

top, or sides of the stove.

• in high trafc areas

• in windy or drafty areas

CAUTION: This stove creates

warm air currents. These currents

move heat to wall surfaces next

to stove. Installing stove next to

vinyl or cloth wall coverings or

operating stove where impurities

(such as tobacco smoke, aromatic

candles, cleaning uids, oil or

kerosene lamps, etc.) in the air

exist, may cause walls to discolor.

IMPORTANT: Vent-free heaters add moisture

to the air. Although this is benecial, installing

heater in rooms without enough ventilation air

may cause mildew to form too much moisture.

See Air for Combustion and Ventilation, pages 7.

www.factorybuysdirect.com

200257-01A

Gas Inlet / Gas esté

INLETGAS PRESSURE MAX 1/2 PSIG (3.5 KPa)

200110-01B

03/15

WARNING:Make sure Regulator Cap is in the appropriate position

asshown in diagrams. Installation and service should be done by

qualifiedservice technician only.

NaturalGas

Whenusing natural gas:

Make sure the cap is installed in the propane/LP inlet of regulator.

Use thread sealant to assure there are no leaks.

Propane/LPGas

Whenusing propane/LP gas:

Make sure the cap is installed in the natural gas (NG) inlet of regulator.

Use thread sealant to assure there are no leaks.

ADVERTENCIA:Asegúrese la tapa del regulador esté en la posición adecuada,

comose muestra en los diagramas. La instalación y reparaciones deben ser realizadas

porun técnico de servicio calificado solamente.

GasNatural

Cuandose utiliza gas natural:

Asegúrese de que la tapa está instalado en el propano/LP entrada del regulador.

Utilice sellador de roscas para asegurar que no haya fugas.

Propano/LPGas

Cuandose utiliza el gas propano / LP:

Asegúresede que la tapa está instalado en la entrada de gas natural (GN) del regulador.

Utilice sellador de roscas para asegurar que no haya fugas.

CorrectPilot Flame Pattern

IncorrectPilot Flame Pattern

3-3.5"WC

NaturalGas

Shown

8-11"WC

3-3.5"WC

NaturalGas

Shown

8-11"WC

1/2Glas

Height

1/2Glas

Height

Yellow

Tipping

CorrectBurner Flame Pattern

IncorrectBurner Flame Pattern

BluePlunger

INSTALLSUPPLIED CAP IN FITTING

NOTBEING USED.

INSTALARTAPASUMINISTRADA MONTAJE NO SE UTILIZA.

YellowPlunger

Thisappliance may be installed in an aftermarket,*

permanentlylocated, manufactured (mobile) home, where

notprohibited by local codes.

Thisappliance is only for use with propane or natural gas.

Fieldconversion by any other means including the use of

akit is not permitted.

WARNING:Make sure the supplied cap is

installedin unused regulator fitting before

connectingthe correct gas supply line.

WARNING:Do not use natural gas and

propanegas together.

CAUTION:Two gas line installations at

thesame time are prohibited.

ADVERTENCIA:Asegúrese de que la línea

noutilizado se conecta por primera vez

antesde conectar la línea de suministro

degas correcta.

ADVERTENCIA:No utilice el gas natural y

elgas propano juntos.

PRECAUCIÓN:Dos instalaciones de

líneasde gas al mismo tiempo están

prohibidos.

FORPROPANE GAS SUPPLY

PARALA FUENTE DE GAS DEL PROPANE

CAUTION:The heater requires an external regulator to reduce

theLP tank pressure to a maximum of 14" W.C. Never connect

thisproduct directly to the supply tank.

PRECAUCIÓN:El calentador requieres una externa regulador

parareducir la presión del tanque de gas a un máximo de 14"

W.C.Nunca conecte este producto directamente al tanque de

suministro.

FORNATURAL GAS SUPPLY

PARALA FUENTE DE GAS DEL NATURAL

NOTICE:An additional gas regulator will be necessary if the

localnatural gas pressure exceeds the heater's rated maximum

inletpressure. If in doubt, contact the local gas utility. If natural

gasinlet pressure exceeds 10" W.C., the safety pressure switch

willactivate. See owners manual for proper procedure to bypass

thepressure switch.

AVISO:Un regulador de gas adicional será necesario si la

presióndel gas natural local excede de entrada nominal máxima

delcalentador presión. En caso de duda, póngase en contacto

conla compañía de gas local. Si la presión de entrada de gas

naturalsupera los 10" WC, el interruptor de presión de

seguridadse activará. Consulte el manual del propietario para el

procedimientoadecuado de derivación el interruptor de presión.

ProcomHeating, Inc. U.S. Patent Information

Thisproduct may be covered by one or more of the following

UnitedStates patents:

8,915,239 8,851,065 8,764,436 8,757,202 8,757,139 8,752,541

8,568,136 8,545,216 8,517,718 8,516,878 8,506,290 8,465,277

8,317,511 8,297,968 8,281,781 8,241,034 8,235,708 8,152,515

8,011,920 7,967,006 7,967,007 7,654,820 7,730,765 7,677,236

7,607,426 7,434,447

Otherpatents pending.

TOLL-FREECustomer Care Number: 1-866-573-0674

Numerode Atención al Cliente GRATUITO:1-866-573-0674

Visitour website for more information www.usaprocom.com

Visitenuestra página web para más informacion www.usaprocom.com

Figure 7 - Minimum Clearance to Wall

and Ceiling

Figure 6 - Connecting to Power Supply

Ceiling

12"

Min.

12"

Min.

48"

Min.

Side

Wall

Side

Wall

Floor

CONNECTING ELECTRICAL

SUPPLY

This stove requires an 120V electrical outlet

within 4 feet of the unit. This is a power supply

for the remote receiver located in the bottom

of the stove. Extensions cords may be used.

The remote receiver requires 4 AA batteries.

This powers the stove in case of an electrical

power outage.

1. Locate 6V DC adapter.

2. Plug connector end of adapter into the

power change assembly on the back of

the stove.

3. Plug adapter into a 120V electrical outlet.

INSTALLATION

Corner

Front of

Stove Unit

Front of

Stove Unit

Wall

Ceiling

Back Wall

Back

Wall

Top View

Side

View

Side

Wall

Side

Wall

10"

Minimum

48"

Minimum

10"

Minimum

12"

Minimum

12"

Minimum

This stove is designed to sit directly on the

oor or on a mantel base.

IMPORTANT: You must maintain minimum

wall and ceiling clearances during installation.

The minimum clearances are shown in Figure

7. Measure from outermost point of stove.

Minimum Wall and Ceiling

Clearances

A. Clearances from outermost point of stove

to any combustible side wall should not be

less than 12".

B. Clearances from the stove to the ceiling

should not be less than 48".

C. Clearance from stove to back wall should

not be less than 6".

Blower Accessory

If using a blower accessory, install at this time.

See instructions included with blower.

CHECK GAS TYPE

Be sure your gas supply is right for your stove.

Otherwise, call dealer where you bought the

stove for proper type stove.

CLEARANCES TO

COMBUSTIBLES

WARNING: You must main-

tain the minimum clearances. If

you can, provide greater clear-

ances from oor, ceiling, and

adjoining wall. Measure from

outermost point of stove.

Connector

End of

Adapter

Power Change

Assembly

www.factorybuysdirect.com 200257-01A

Gas Inlet / Gas esté

INLETGAS PRESSURE MAX 1/2 PSIG (3.5 KPa)

200110-01B

03/15

WARNING:Make sure Regulator Cap is in the appropriate position

asshown in diagrams. Installation and service should be done by

qualifiedservice technician only.

NaturalGas

Whenusing natural gas:

Make sure the cap is installed in the propane/LP inlet of regulator.

Use thread sealant to assure there are no leaks.

Propane/LPGas

Whenusing propane/LP gas:

Make sure the cap is installed in the natural gas (NG) inlet of regulator.

Use thread sealant to assure there are no leaks.

ADVERTENCIA:Asegúrese la tapa del regulador esté en la posición adecuada,

comose muestra en los diagramas. La instalación y reparaciones deben ser realizadas

porun técnico de servicio calificado solamente.

GasNatural

Cuandose utiliza gas natural:

Asegúrese de que la tapa está instalado en el propano/LP entrada del regulador.

Utilice sellador de roscas para asegurar que no haya fugas.

Propano/LPGas

Cuandose utiliza el gas propano / LP:

Asegúresede que la tapa está instalado en la entrada de gas natural (GN) del regulador.

Utilice sellador de roscas para asegurar que no haya fugas.

CorrectPilot Flame Pattern

IncorrectPilot Flame Pattern

3-3.5"WC

NaturalGas

Shown

8-11"WC

3-3.5"WC

NaturalGas

Shown

8-11"WC

1/2Glas

Height

1/2Glas

Height

Yellow

Tipping

CorrectBurner Flame Pattern

IncorrectBurner Flame Pattern

BluePlunger

INSTALLSUPPLIED CAP IN FITTING

NOTBEING USED.

INSTALARTAPASUMINISTRADA MONTAJE NO SE UTILIZA.

YellowPlunger

Thisappliance may be installed in an aftermarket,*

permanentlylocated, manufactured (mobile) home, where

notprohibited by local codes.

Thisappliance is only for use with propane or natural gas.

Fieldconversion by any other means including the use of

akit is not permitted.

WARNING:Make sure the supplied cap is

installedin unused regulator fitting before

connectingthe correct gas supply line.

WARNING:Do not use natural gas and

propanegas together.

CAUTION:Two gas line installations at

thesame time are prohibited.

ADVERTENCIA:Asegúrese de que la línea

noutilizado se conecta por primera vez

antesde conectar la línea de suministro

degas correcta.

ADVERTENCIA:No utilice el gas natural y

elgas propano juntos.

PRECAUCIÓN:Dos instalaciones de

líneasde gas al mismo tiempo están

prohibidos.

FORPROPANE GAS SUPPLY

PARALA FUENTE DE GAS DELPROPANE

CAUTION:The heater requires an external regulator to reduce

theLP tank pressure to a maximum of 14" W.C. Never connect

thisproduct directly to the supply tank.

PRECAUCIÓN:El calentador requieres una externa regulador

parareducir la presión del tanque de gas a un máximo de 14"

W.C.Nunca conecte este producto directamente al tanque de

suministro.

FORNATURAL GAS SUPPLY

PARALA FUENTE DE GAS DELNATURAL

NOTICE:An additional gas regulator will be necessary if the

localnatural gas pressure exceeds the heater's rated maximum

inletpressure. If in doubt, contact the local gas utility. If natural

gasinlet pressure exceeds 10" W.C., the safety pressure switch

willactivate. See owners manual for proper procedure to bypass

thepressure switch.

AVISO:Un regulador de gas adicional será necesario si la

presióndel gas natural local excede de entrada nominal máxima

delcalentador presión. En caso de duda, póngase en contacto

conla compañía de gas local. Si la presión de entrada de gas

naturalsupera los 10" WC, el interruptor de presión de

seguridadse activará. Consulte el manual del propietario para el

procedimientoadecuado de derivación el interruptor de presión.

ProcomHeating, Inc. U.S. Patent Information

Thisproduct may be covered by one or more of the following

UnitedStates patents:

8,915,239 8,851,065 8,764,436 8,757,202 8,757,139 8,752,541

8,568,136 8,545,216 8,517,718 8,516,878 8,506,290 8,465,277

8,317,511 8,297,968 8,281,781 8,241,034 8,235,708 8,152,515

8,011,920 7,967,006 7,967,007 7,654,820 7,730,765 7,677,236

7,607,426 7,434,447

Otherpatents pending.

TOLL-FREECustomer Care Number: 1-866-573-0674

Numerode Atención al Cliente GRATUITO:1-866-573-0674

Visitour website for more information www.usaprocom.com

Visitenuestra página web para más informacion www.usaprocom.com

INSTALLATION

Figure 8 - Back of Stove

Gas Connection

Yellow Natural Gas

Plunger Underneath

Metal Cap

Blue Propane/LP Gas

Plunger Underneath

Dust Cover

Figure 9 - Gas Regulator

Insert Gas Fitting

for Natural Gas

Insert Gas Fitting

for Propane/LP Gas

Fitting supplied with the product located in

the hardware bag. Fitting part number:

160960-02 (straight)

160960-03 (elbow)

Blue Dust Cover DO NOT REMOVE

Blue Propane/LP Plunger

Install Gas Fitting Here

GAS SELECTION

This appliance is factory

preset for propane/LP gas.

No changes are required for

connecting to propane/LP.

Only a qualied installer or service

technician can perform gas selec-

tion and connecting to gas supply.

CAUTION: Two gas line in-

stallations at the same time are

prohibited.

CAUTION: To avoid gas leak-

age for the gas not being used at

the inlet of regulator, a qualied

installer or service technician

must use supplied cap.

You will notice a color coded

plunger on the inside of the regu-

lator. This is normal. When the in-

let connection tting is inserted

and tightened, this plunger will

be pushed back by the tting

making all of the adjustments

for the gas being supplied. DO

NOT REMOVE THE PLUNGER.

The regulator will not work.

The inlet regulator is color coded

for identication of the correct

gas type. Blue is for propane (LP

gas) and yellow is for natural gas.

FOR PROPANE/LP GAS

INSTALLATION: BLUE

1. Remove blue dust cover.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Duluth Forge Herd Handbücher

Duluth Forge

Duluth Forge DF25SMS Kurzanleitung

Beliebte Herd Handbücher anderer Marken

Arada

Arada Cassette Stove Bedienungsanleitung

Parmco

Parmco FS 600 Bedienungsanleitung

MCZ

MCZ SUITE AIR 10 M2 Bedienungsanleitung

HearthStone

HearthStone Stowe DV 8321 Fehlerbehebungshandbuch

Cattara

Cattara FAMILY Bedienungsanleitung

Stanley

Stanley Argon F500 OVAL Bedienungsanleitung

Avalon

Avalon B-VENT Bedienungsanleitung

Nordpeis

Nordpeis Vega Bedienungsanleitung

Exquisit

Exquisit EKC601-5 Bedienungsanleitung

Stanley

Stanley Oisin Oil MK II Betriebsanleitung

Thermocet

Thermocet Brookfield S/CC Bedienungsanleitung

HASE

HASE delhi Bedienungsanleitung

Vermont Castings

Vermont Castings Intrepid 2 Bedienungsanleitung

Italiana Camini

Italiana Camini CLASSICA Kurzanleitung

Avalon

Avalon Vashon Avanti DVS FS Bedienungsanleitung

Spartherm

Spartherm ambiente a1 Bedienungsanleitung

Dimplex

Dimplex MCFSTV12AU Bedienungsanleitung

Warmlite

Warmlite WL46040 Bedienungsanleitung