DynDNS Mega-Pixel Bedienungsanleitung

Before trying to connect or operate this product, please read this manual completely

INSTALLATION &

OPERATION MANUAL

Mega-Pixel IP Camera

IP Box Camera

Fixed IP Indoor Mini-dome

Fixed IP Outdoor Mini-dome

Bullet IP Camera Indoor/Outdoor

Table Of Contents

SAFETY PRECAUTIONS .............................................................................3

1. PRODUCT FEATURES.............................................................................4

1.1 PRODUCT INSTRUCTIONS.....................................................................4

1.2 PRODUCT FEATURES ...........................................................................5

2. DESCRIPTION OF THE SURFACE .........................................................6

2.1 THE IP BOX CAMERA (POE).................................................................6

2.2THE FIXED IP INDOOR/ OUTDOOR MINI-DOME (POE)............................8

2.3THE BULLET IP CAMERA INDOOR/OUTDOOR (POE)..............................9

2.4THE RESET BUTTON ..........................................................................11

2.5THE ALARM WIRING DIAGRAMS ...........................................................12

2.6THE USB FUNCTION ..........................................................................15

3. INSTALLATION ......................................................................................16

3.1 HARDWARE INSTALLATION..................................................................16

3.2 THE INSTALLATION OF THE FIXED IP INDOOR MINI-DOME (POE)...........17

3.3THE INSTALLATION OF THE FIXED IP OUTDOOR MINI-DOME (POE) .......18

3.4 PLACING A DESICCANT PACK INSIDE THE CAMERA...............................19

3.5 UPDATING SYSTEM SOFTWARE...........................................................20

4. Network Configuration..........................................................................21

4.1 CABLE CONNECTIONS........................................................................21

4.1.1 Connect to a computer ......................................................................................................................21

4.1.2 Connect to a LAN Hub (INTRANET) .............................................................................................21

4.2 CONFIGURE YOUR IP CAMERA NETWORK SETTINGS ...........................22

4.2.1 Enable DHCP Function.....................................................................................................................22

4.2.2 Set IP Address ...................................................................................................................................22

4.3 TCP/IP COMMUNICATION SOFTWARE.................................................23

4.4 TCP/IP INSTALLATION .......................................................................25

4.5 TCP/IP CONFIGURATION SETTING ......................................................26

4.6 CONNECTION TESTING.......................................................................27

5. Operating Instructions for Image Software and Network..................29

5.1 MICROSOFT INTERNET EXPLORER ......................................................30

5.1.1 Connecting the IP camera ................................................................................................................30

5.1.2 Live Video........................................................................................................................................31

5.1.3 Setup.................................................................................................................................................35

5.2 THE CMS (CENTRAL MANAGEMENT SYSTEM).....................................87

5.2.1 Introduction to the CMS ..................................................................................................................87

5.2.2 Install the CMS in your PC..............................................................................................................88

5.2.3 Login the CMS.................................................................................................................................89

5.2.4 Operation..........................................................................................................................................91

6. ADVANCED OPERATION....................................................................100

7. SPECIFICATIONS.................................................................................103

8. Functions of client PC.........................................................................105

APPENDIX 1. –How to run IP Camera UPnP.........................................106

APPENDIX 2. –Register as a DDNS member ........................................116

SAFETY PRECAUTIONS

All the following safety and operational instructions to prevent harm or injury to the operator(s) or

other persons should be read carefully before the unit is activated.

WARNING

 To prevent fire or shock hazard, avoid exposing this unit to rain or moisture.

 Do not block ventilation openings.

 Do not place anything on top of the unit that might spill or fall into it.

 Do not attempt to service this unit yourself, as opening or removing covers ma

expose you to dangerous voltage or other hazards. Please refer all servicing to

your distributor/ retailer.

 Do not use liquid cleaners or aerosols for cleaning.

 To prevent fire or electric shock, do not overload wall outlets or extension cords.

 PoE warning : If the PoE injector is used instead of the supplied power adaptor, all

of the wiring to and from the injector must be routed/ installed inside a building

plant and never routed/ installed outside of the building/ plant.

 Please only select a power adapter or power certified by UL and marked at 24Vac

/ 60 Hz, minimum 1A, class 2 or LPS.

 The IP Box Camera and the Indoor Mini-dome are for Indoor use only.

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.

DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

1. PRODUCT FEATURES

1.1 Product Instructions

This IP camera series is a high performance mega-pixel network camera which is equipped with a

high resolutions SONY 1.3M CMOS sensor and a resolution of up to 1280 x 1024 (SXGA). This

powerful new series enables you to see fresh images in fine detail aided by a spectrum of high

resolutions plus WDR technology that combats problems like capturing images against

backgrounds of bright light. In addition the series is equipped with the dynamic H.264 video

compression format, the compression codec which ensures top image quality at a low bit rate. The

3GPP installed mobile phone helps you see live scenes via the Internet as well. And this series

provides you with freshly designed, simultaneous video codec streams of H.264, MPEG4 and

MJPEG. This function, the multi-profile function, can simultaneously use different rates of

resolutions while allowing 3 video codecs to connect with computers at the same time. This IP

camera not only offers the highest resolutions in images in the field, but also day and night, pre- and

post-alarm, and ePTZ functions.

Following are the special powers featured in this series.

SXGA / 1280x1024 pixels

The series lets you view the video feed with a large field of high resolutions at SXGA / 1280x1024

pixels that provide you with clear images in great detail.

WDR (Wide Dynamic Range)

Besides, the series provides WDR technology which is aimed at coping with problems like poor

quality images shot against a strong backlight. WDR uses two shutter speeds in alternative video

fields, high and normal, and combines these two fields into one frame. It allows every detail to be

captured accurately, even if one portion is bright while other portions are dark. As a result,

combined fields yield a frame of high quality images.

H.264 compression

Currently, the H.264 is the most common and dynamic video compression format and a powerful

compression codec which delivers superior image quality at a low bit rate.

3GPP

Users can view a live scene via the Internet with a 3GPP installed mobile phone.

(Note: The 3G network bandwidth is limited; you can't use too large video size on your cell phone.)

Video Settings:

 Video Profile 1

 Maximum frame rate: 3 fps

 Intra Frame Period: 1 S

 Constant bit rate: 64 Kbps

In short, the series provides quality images and professional surveillance functions for

comprehensive security applications.

1.2 Product Features

 Adopts TI TMS320DM365 digital media processor.

 SONY 1.3M CMOS sensor.

 Simultaneous H.264, MPEG4 and MJPEG video compression.

 Three multi-profile applications: Selectable resolutions, frame rates, qualities, and image

chopping.

 Supports WDR.

 Built-in IR-cut filter provides high quality images in low light conditions.

 Two-way audio.

 3GPP mobile surveillance.

 Advanced motion detection ( 512 zones. Sensitivity: 0 -100 % ).

 Built-in SD / SDHC card for schedule and alarm recording.

 Supports ONVIF.

 Full range of power options: DC12V / AC24V / PoE ( IEEE 802.3af ).

2. DESCRIPTION OF THE SURFACE

2.1 The IP Box Camera (PoE)

Front Panel and Rear Panel:

-- Front Panel -- -- Rear Panel --

21/4＂-20UNC

1. Light Sensor: Registers the quality of light in the camera’s environment, and controls the iris

shuttle to provide better information concerning the light.

2. MICROPHONE: The IP Camera has an additional audio function. The device has a

microphone built into its front panel which records sound.

3. POWER indicator: Indicates the power status of the unit.

4. Plug Inlet: A DC 12V inlet that connects to an external power supply.

5. Plug Inlet: An AC 24V inlet that connects to an external power supply.

6. ETHERNET 10/100 Connector: This is a standard RJ-45 connector for 10/100 Mbps Ethernet

networks. PoE (Power over Ethernet) function: Provides power to the device via the same

cable as used for the network connection.

7. RESET: Recover to factory default. (Refer to section 2.4 The Reset Button.)

8. VIDEO OUT Connector: The connector provides the unit’s composite video signals to a

monitor. (This connector adjusts and improves the images.)

9. USB port: The user can use a USB device cable to connect the IP camera to the USB port on

the PC.

10.LED indicator: The green light indicates the unit is activating and the SD card cannot be

removed.

11.AUDIO IN: The connector is used to connect the audio output from other devices to the camera.

12.SD/ SDHC CARD slot: This is used for updating system software and archiving / accessing

critical images.

13.GPIO: This is a 6-PIN connector including the ALARM IN/OUT, RS-485, DC OUTPUT and

GROUND items for connecting with external devices.

14.AUDIO OUT: Provides the camera’s audio signal to a speaker or stereo.

Flank Panel:

IRIS

1. AES

2. DC IRIS

3. DHCP

4. STATIC IP

1.ALM-OUT A

2.ALM-OUT B

3.ALM-IN +

4.ALM-IN -

5.ALM-RST +

6.ALM-RST -

7.RS-485:D+

8.RS-485:D-

9.DC-OUT(5V)

10.GND

11.AUDIO-IN

12.AUDIO-OUT

1. IRIS: Auto iris connector.

This camera works with a DC drive auto iris lens. Please refer to the pin assignment

marked on the camera when connecting the auto iris lens

2. DIP Switch:

1. AES: Auto electric shutter.

2. DC IRIS: Use an auto iris (DC drive)

3. DHCP: Turn On / Turn Off to use the DHCP protocol. If the switch

points upwards, the device can obtain an IP address from

the DHCP server via the network.

4. STATIC IP: If the switch points down, the device can’t obtain an IP

address from the DHCP server. This option is needed

to configure the network communication settings.

(*In the default factory configuration, this DIP Switch is in the Down

position.)

12 3 456 7

2.2 The Fixed IP Indoor/ Outdoor Mini-Dome (PoE)

1. Plug Inlet: A DC 12V inlet that connects to an external power supply.

2. Plug Inlet: An AC 24V inlet that connects to an external power supply.

3. ETHERNET 10/100 Connector: This is a standard RJ-45 connector for 10/100 Mbps

Ethernet networks. PoE (Power over Ethernet) function: Provides power to the device via the

same cable as used for the network connection.

4. AUDIO IN: The connector is used to connect the audio output from other devices to the

camera.

5. VIDEO OUT Connector: The connector provides the unit’s composite video signals to a

monitor. (This connector adjusts and improves the images.)

6. AUDIO OUT: Provides the camera’s audio signal to a speaker or stereo.

7. GPIO: This is a 6-PIN connector including the Digital output/input, DC output and

GROUND items for connecting with external devices.

8. USB port: The user can use a USB device cable to connect the IP camera to the USB port on

the PC.

9. SD/ SDHC CARD slot: This is used for updating system software and archiving / accessing

critical images.

10. RESET: Recover to factory default. (Refer to section 2.4 The Reset Button.)

2.3 The Bullet IP Camera Indoor/ Outdoor (PoE)

The component parts ( the internal view ).

Dismantle the bullet IP camera to see its different parts. The picture here shows you the internal

component items making up the product. SCREWS

SUN SHIELD

SD PCB

LENS FAN

FRONT CASE

IR PCB

SENSOR PCB

PCB PLATE

POWER PCB

MIDDLE CASE

WATERPROOF RUBBER

REAR CASE

Camera with bracket ( the external view ).

The picture here shows the camera's exterior, with the bracket screwed in and fixed to it. The

bracket enables you to easily mount the camera on a wall, turned at the angle you want.

NOTE: Use the 2 screws to screw the sun shield (above) into the 2 extreme holes indicated

in the bullet camera (below) to get an unobstructed viewing angle.

Please don’t use the middle hole in the camera, as that will block the view.

Inhaltsverzeichnis

Andere DynDNS IP-Kamera Handbücher

DynDNS

DynDNS DDK-1500 Bedienungsanleitung

Beliebte IP-Kamera Handbücher anderer Marken

FLIR

FLIR Exx series Bedienungsanleitung

Avigilon

Avigilon H4A-BO1-IR Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWCA-C128-64 Bedienungsanleitung

ShareTech

ShareTech AV1 Bedienungsanleitung

Ezviz

Ezviz C6C Bedienungsanleitung

Melchioni

Melchioni UCAM 2015 Bedienungsanleitung

Geutebruck

Geutebruck G-Cam/ESD-4630 Bedienungsanleitung

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Bedienungsanleitung

Mitel

Mitel 6800i Series Service-Handbuch

Vitek

Vitek VTC-IR403-212NP Bedienungsanleitung

THOMSON

THOMSON DSC - 323W Bedienungsanleitung

AVer

AVer FB2027 Bedienungsanleitung

ENFORCER

ENFORCER EV-T5105-N2SQ Bedienungsanleitung

Wansview

Wansview NC543 Bedienungsanleitung

Eneo

Eneo MCB-64A0003M0A Bedienungsanleitung

deView electronics

deView electronics CBDNI36F Bedienungsanleitung

Swann

Swann SwannEye Bedienungsanleitung

LevelOne

LevelOne IP CamSecure Bedienungsanleitung