Dynex DX-E402 - EN Broadband Router Bedienungsanleitung

USER GUIDE

GUIDE DE L’UTILISATEUR • GUÍA DEL USUARIO

4-Port 10/100 Mbps Router

Routeur à 4 ports à 10/100 Mbps

Enrutador de 4 puertos de 10/100 Mbps

DX-E402

2Contents

Dynex DX-E402

4-Port 10/100 Mbps Router

Contents

Introduction ......................................................................................2

Setting up and using your router.......................................................4

Appendix - FAQ................................................................................10

Specifications ..................................................................................19

Legal notices ...................................................................................20

One-year limited warranty..............................................................21

Français ...................................................23

Español....................................................47

Introduction

Thank you for choosing the DX-E402 10/100M router. This router provides you with a

dedicated solution for small office/home office (SOHO) networks. With your network all

connected, your local network can share files, printers, and Internet access for multiple

computers through one ISP account.

your router has an easy, Web-based setup for installation and management. Even though

you may not be familiar with your router, this guide will make configuring your router easy.

Before installing your router, look through this guide to get to know all of your router's

functions.

• Built-in firewall, supporting IP address filtering, domain name filtering, and MAC

address filtering

• Supports connecting to and disconnecting from the Internet at a specified time

• Supports access control, allowing parents and network administrators to establish

restricted, time-based access for children or staff

• Supports TCP/IP, PPPoE, DHCP, ICMP, NAT, and SNTP

• Supports UPnP, dynamic DNS, static routing, and VPN pass-through

• Supports traffic statistics

• Supports ICMP-FLOOD, UDP-FLOOD, and TCP-SYN-FLOOD filtering

• Ignores ping packets from WAN or LAN ports

• Supports firmware upgrades

• Supports remote and Web management

Introduction 3

Front Panel

The front panel of your router consists of several LED indicators, which are designed to

indicate active connections.

Rear Panel

# Indicator Description

1Power LEDOn-Powerison

LED Off - Power is off

2 System LED On - your router is initializing

LED Off - your router has an error

LED Blinking - your router is working correctly

3 Link/Act LED On - there is a device linked to the corresponding port

LED Off - there is no device linked to the corresponding port

LED Blinking - Data is being sent or received on the corresponding port

# Function Description

1 AC power jack Plug the AC connector from the AC power adapter into this jack.

Caution: Use only the AC power adapter supplied with your router,

or damage may result.

4Setting up and using your router

Setting up and using your router

System requirements

• Broadband Internet access service (DSL/cable/Ethernet)

• A cable or DSL modem that has an RJ-45 connector (not necessary if you connect your

router to Ethernet)

• Each computer on your LAN needs a working Ethernet adapter and an Ethernet cable

with RJ-45 connectors

• TCP/IP protocol must be installed on each computer

• A Web browser, such as Microsoft Internet Explorer 5.0 or later, or Netscape Navigator

6.0 or later.

Installation requirements

• Do not place in direct sunlight or near a heater or heating vent

• There should be at least 2 inches (5 cm) of clear space on all sides of your router

• Place in a well ventilated position, especially if it is in a closet

• Operating temperature: 32° F~104° F (0° C~40° C )

• Operating Humidity: 10%~90% RH, Non-condensing

Default settings

The default IP address of your router is 192.168.1.1, and the default subnet mask is

255.255.255.0. You can see these values from the LAN and you can change them as needed

(examples in this guide use the default values).

Connecting your router

Before you install your router, you should be able to successfully connect your computer to

the Internet through your broadband service. If there is any problem, contact your ISP for

help. After you have successfully connected to the Internet, install your router according to

the following steps.

You will first connect your hardware and then you will configure your router using the Quick

Setup wizard. You can configure and manage your router with a Web-based (Internet

Explorer or Netscape® Navigator) utility. The Web-based utility can be used on any Windows,

Macintosh, or UNIX OS with a Web browser.

2 Factory default RESET button Press this button and hold it about five to seven seconds until the

System LED flashes three times, then release the button and wait

for your router to reboot.

3 WAN port (RJ-45) Plug the RJ-45 cable from the cable or DSL modem into this port.

4 10/100 LAN ports (RJ-45) Plug the RJ-45 cables from LAN ports on your local computers into

these ports.

# Function Description

Setting up and using your router 5

Warning: Unplug your router and keep your hands dry to avoid electrical shock.

To connect your hardware:

1Turn off your computer(s), your cable or DSL modem, and the router. You may need to

unplug the device if no power switch is available.

2Locate the Ethernet cable that connects your modem and computer. Unplug that cable

from your modem, and plug it into LAN Port 1 port on the back of the router.

3Connect the supplied Ethernet cable to on the WAN port back of the router.

4Connect the other end of the supplied Ethernet cable to your modem, in the port that's

now free.

5If needed, connect additional computers, switches, or hubs to the LAN ports on the

router.

6Connect the power adapter to the power connector on the back of the router, then

plug the other end into a power outlet. The router starts to work automatically.

RESET

Switch or Hub

To LAN 1

To WAN

LAN

To power

Internet

To LAN

XDSL Cable

Ethernet

6Setting up and using your router

7Turn on your cable or DSL modem.

8Turn on your computer.

9After your computer starts, run the setup wizard to configure your router.

Configuring your router

With a Web-based (Internet Explorer or Netscape® Navigator) utility, your router is easy to

configure and manage. The Web-based utility can be used on any Windows, Macintosh, or

UNIX OS with a Web browser.

To configure your router:

1Connect to your router by enteringhttp://192.168.1.1 in the address field of Web

browser. A login window similar to the following opens.

2Enter admin for both the User Name and Password, in lower case letters, then

click OK or press the Enter key.

Note: If the above screen does not open, it means that your Web-browser has been set to a

proxy. Click Tools,Internet Options, Connections, then LAN Settings. In the screen

that appears, uncheck the Using Proxy checkbox, then click OK.

If the User Name and Password are correct, the Web-based utility main menu opens.

Setting up and using your router 7

3Click the Quick Setup link on the left of the main menu. The Quick Setup page opens.

4Click Next. The Quick Setup - Choose WAN Connection Type page opens. Your

router supports three popular ways to connect to the Internet.

5Select a connection type compatible with your ISP. If you are given another way not

listed here, refer to the WAN submenu (see WAN submenu on page 13) for a detailed

list.

6Click Next to enter the necessary network parameters.

•IfyouchosePPPoE, the following page opens:

Enter the User Name and Password provided by your ISP. These fields are case

sensitive. If you have difficulty with this process, contact your ISP.

- OR -

• If you choose Dynamic IP, your router automatically receives the IP parameters

from your ISP without needing to enter any parameters.

- OR -

8Setting up and using your router

•IfyouchoseStatic IP, the Static IP settings page opens.

Note: The IP parameters should be provided by your ISP.

Enter the following:

- IP Address—This is the WAN IP address as seen by external users on the Internet

(including your ISP).

- Subnet Mask—The Subnet Mask used for the WAN IP address, and it is usually

255.255.255.0

- Default Gateway—The gateway, if required.

- Primary DNS—The DNS Server IP address, if required.

- Secondary DNS—If your ISP provides another DNS server, enter it into this field.

7Click Next. The Quick Setup - Finish page opens.

8After finishing all configurations of basic network parameters, click Finish to complete

the process and exit.

Configuring your router (advanced)

You can access the router settings to configure the advanced functions of your router. There

are ten main menus on the left of the Web-based utility. Submenus are available when you

click one of the main menus. The ten main menus are:

• Status

•QuickSetup

•Network

•DHCP

•Forwarding

•Security

• Static Routing

Setting up and using your router 9

•IP&MACBinding

•DynamicDNS

• System Tools

On the right of the Web-based utility there are the detailed explanationsand instructions for

the corresponding page. To apply any settings you have altered on the page, click Save.

To access the advanced settings:

1Connect to your router by entering http://192.168.1.1 in the address field of Web

browser. A login window similar to the following opens.

2Enter admin for both the User Name and Password, in lower case letters, then click OK

or press the Enter key.

Note: If the above screen does not open, it means that your Web-browser has been set to a

proxy. Click Tools, Internet Options, Connections, then LAN Settings. In the screen that

appears, uncheck the Using Proxy checkbox, then click OK.

If the User Name and Password are correct, the Web-based utility main menu opens.

10 Appendix - FAQ

Appendix - FAQ

I have Windows 98 on my computer or I cannot connect to the router.

How do I configure my computer for the router?

To install the TCP/IP component on your computers:

1On the Windows taskbar, click Start, Settings, then click Control Panel.

2Double-click the Network icon, then click the Configuration tab in the Network

window.

3Click Add, click Protocol, then click Add.

4On the Select Network Protocol page, under Manufacturers, highlight Microsoft.

5Under Network Protocols, highlight TCP/IP, then click OK. The TCP/IP protocol takes

effect after you reboot your computer.

To configure TCP/IP to obtain an IP Address automatically on your computers:

1Connect the local computers to the LAN ports on your router using category-5 cables

with RJ-45 connectors.

2On the Windows taskbar, click Start, Settings, then click Control Panel.

Andere Handbücher für DX-E402 - EN Broadband Router

Inhaltsverzeichnis

Sprachen:

Andere Dynex Netzwerk-Router Handbücher

Dynex

Dynex DX-NRUTER Bedienungsanleitung

Dynex

Dynex DX-GB8PRT Bedienungsanleitung

Dynex

Dynex DX-NRUTER Bedienungsanleitung

Dynex

Dynex DX-E401 - EN Broadband Router Bedienungsanleitung

Dynex

Dynex DYNEX DX-GB5PRT Bedienungsanleitung

Dynex

Dynex DX-E401 - EN Broadband Router Bedienungsanleitung

Dynex

Dynex DX-E401 - EN Broadband Router Bedienungsanleitung

Dynex

Dynex DX-GB5PRT Bedienungsanleitung

Dynex

Dynex DX-WGRTR Installationsanleitung

Dynex

Dynex DX-GB8PRT Bedienungsanleitung

Dynex

Dynex DX-ESW5 - Switch Bedienungsanleitung

Dynex

Dynex DX-E402 - EN Broadband Router Bedienungsanleitung

Dynex

Dynex DX-NRUTER Bedienungsanleitung

Dynex

Dynex DX-GB5PRT Bedienungsanleitung

Dynex

Dynex DX-GB8PRT Bedienungsanleitung

Dynex

Dynex DX-E401 - EN Broadband Router Installationsanleitung

Dynex

Dynex DX-WGRTR Bedienungsanleitung

Dynex

Dynex DX-wegrtr - Enhanced Wireless G Router Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise