E-line ELI-IP5-APTZ21-30X Bedienungsanleitung

800.683.6835

ELI-IP5-PTZ21-12X

ELI-IP5-PTZ21-20X

IP Network PTZ Cameras User’s Manual

eLineTechnology.com

2yr

Warranty

Motion

Activated

Recording

Free

Tech-Support

Network

ELI-IP5-PTZ21-12X-I

PTZ

Control

ELI-IP5-APTZ21-30X

Table of Contents

1FEATURES AND FUNCTIONS ..........................................................................................1

1.1 General Introduction...................................................................................................................................................1

1.2 Features.......................................................................................................................................................................1

1.2.1 On-Screen Menu....................................................................................................................................................1

1.2.2 Proportional Pan and Tilt......................................................................................................................................1

1.2.3 On-screen Tips.......................................................................................................................................................1

1.2.4 Preset Setup and Call...........................................................................................................................................1

1.2.5 Auto Scan................................................................................................................................................................1

1.2.6 Auto Touring...........................................................................................................................................................1

1.2.7 Auto Pattern............................................................................................................................................................1

1.2.8 3D Privacy Masking...............................................................................................................................................1

1.2.9 Defog.......................................................................................................................................................................2

1.2.10 3D noise reduction............................................................................................................................................2

1.2.11 Action on Alarm.................................................................................................................................................2

1.2.12 Auto Flip .............................................................................................................................................................2

1.2.13 Self-diagnosis....................................................................................................................................................2

1.2.14 Day/Night Mode (B/W & Color Mode)............................................................................................................2

1.2.15 Auto Focus.........................................................................................................................................................2

1.2.16 Backlight Compensation..................................................................................................................................2

1.2.17 Pan Tilt and Zoom.............................................................................................................................................2

1.2.18 FD 3D Intelligent Positioning...........................................................................................................................2

1.2.19 Idle Status ..........................................................................................................................................................2

1.2.20 Image Stabilizer/Flip.........................................................................................................................................2

2QUICK CONFIGURATION TOOL .......................................................................................3

2.1 Overview ......................................................................................................................................................................3

2.2 Operation .....................................................................................................................................................................3

3WEB OPERATION..............................................................................................................6

3.1 Network Connection...................................................................................................................................................6

3.2 Login and Logout........................................................................................................................................................6

4MENU .................................................................................................................................9

4.1 Screen Menu Index ..................................................................................................................................................9

4.2 Self-diagnosis System Information ........................................................................................................................10

4.3 Main Menu .................................................................................................................................................................10

4.4 Menu Operation ......................................................................................................................................................10

4.4.1 System Information..............................................................................................................................................11

4.4.2 Display Setting .....................................................................................................................................................12

4.4.3 Camera Setting....................................................................................................................................................12

4.4.4 Function Setting...................................................................................................................................................18

4.4.5 IR Light Setting.....................................................................................................................................................26

4.5 Dome Abnormal Phenomenon Operation........................................................................................................26

4.5.1 Restore to Factory Default Setup......................................................................................................................26

4.5.2 PTZ Movement is not smooth............................................................................................................................26

5CABLE CONNECTION .....................................................................................................27

5.1 Combination Cable Connection............................................................................................................................27

5.2 System Layout ........................................................................................................................................................27

5.2.1 System Connection .............................................................................................................................................28

5.2.2 Alarm Connection................................................................................................................................................28

6FAQ...................................................................................................................................29

6.1 Daily Maintenance..................................................................................................................................................29

6.2 Problems and Solutions.......................................................................................................................................29

7APPENDIX Ⅰ THUNDER PROOF AND SURGE PROTECTION .......................................30

8APPENDIX 2 TOXIC OR HAZARDOUS MATERIALS OR ELEMENTS ...........................31

iii

Welcome

Thank you for purchasing our product!

This user’s manual is designed to be a reference tool for the operation of your system.

Here you can find information about this speed dome features and functions, as well as a detailed menu tree.

Please keep it well for future reference!

Before installation and operation, please read the following safeguards and warnings carefully!

Important Safeguards and Warnings

1．Electrical safety

zAll installation and operation here should conform to your local electrical safety codes.

zWe assume no liability or responsibility for all the fires or electrical shock caused by improper handling

or installation.

zWe are not liable for any problems caused by unauthorized modification or attempted repair.

2．Transportation Security

zNo heavy stress, violent vibration or water splash are allowed during transportation, storage and

installation.

zPlease use the original packing material (or the material of the same quality) when you ship it back to

the manufacturer.

3．Installation

zDo not apply power to the product before completing installation.

zDo not put object on the product.

4．Environment

zThis series product should be installed in a cool, dry place away from direct sunlight, inflammable,

explosive substances and etc.

zPlease keep it away from the electromagnetic radiation object and environment.

zPlease keep the sound ventilation.

zDo not allow the water and other liquid falling into the device. This series product complies with the IP66

standard specified in the Degrees of Protection Provided by Enclosure.

zPlease make sure the CCD (CMOS) component is out of the radiation of the laser beam device.

Otherwise it may result in CCD (CMOS) optical component damage.

zUsually we recommend thunder-proof device to prevent thunder strike.

zThe GND port of the product shall be grounded to further enhance the reliability of the device.

5. Daily Maintenance

zCurrent series product has no power button. Please unplug all corresponding power cables before your

begin installation or daily maintenance work.

zPlease keep the dustproof cap back to protect the CCD or CMOS part if the device does not work for a

long time.

zDo not touch CCD (CMOS) component. You can use the blower to clean the dust on the surface of the

device. You can use the dry cloth with some alcohol or mild detergent to clear if necessary.

zDo not use the volatility solvent such as the benzene or thinner, or detergent with strong abradibility. It

may result in lens damage or it may adversely affect the device performance.

zIf there is too much dust, please use the water to dilute the mild detergent first and then use it to clean

the device. Finally use the dry cloth to clean the device.

6. About Accessories

Always use all the accessories recommended by manufacturer.

Before installation, please open the package and check that all the components are included in the package:

Contact you local retailer ASAP if something is missing in your package.

1Features and Functions

1.1 General Introduction

This series IR network intelligent speed dome product is an integrated high intelligent speed dome. It adopts

new configuration design and is easy for the project construction. This is a digital and intelligent product of

vivid video. The installation is convenient.

Comparing with the previous series product, this series IR network intelligent speed dome has added some

new features. It supports 120M IR night vision, intelligent analytics, and the PTZ rotation speed can

automatically adjust according to the zoom rate of the lens. It supports various languages, real-time clock

function and protocol auto recognition. It supports 360° continuously pan, 100°tilt(-10°-90°) and 180° auto

flip. It can realize no blind spot monitor.

1.2 Features

This series speed dome has the following features:

1.2.1 On-Screen Menu

This series product menu supports multiple languages.

It is easy for you to view dome information and configure dome, camera parameters.

1.2.2 Proportional Pan and Tilt

This function keeps the image from moving too fast when there is a large amount of zoom.

The IR high definition speed dome continually decreases or increases pan and tilt speeds in proportion to

depth of zoom. When zooms speed is increasing, the camera moving speed becomes slow. When zooms

speed is decreasing, the camera moving speed becomes fast.

1.2.3 On-screen Tips

Here you can view:

zDome title and system version (Software and hardware)

zDome system temperature. (Optional. You can disable this function)

zDome pan/tilt coordinates, preset ID.

1.2.4 Preset Setup and Call

Preset function is to save the address information (such as PTZ pan/tilt, focus and etc) to the memory so

that you can quickly adjust the dome and PTZ to the correct position.

1.2.5 Auto Scan

Camera scans back and forth regularly in a horizontal field. Here you need to set left and right limit and scan

speed.

1.2.6 Auto Touring

Add addresses into a routine in a desired order and then set time and stop duration for each address. The

dome will begin an auto touring between these addresses.

1.2.7 Auto Pattern

Memorize dome operation such as pan, tilt, and zoom to repeat. You can call it to repeat the previous

operation.

1.2.8 3D Privacy Masking

Privacy masking is a user-defined, four-sided area that can not be viewed by you. The masking area will

move with pan and tilt functions and automatically adjust in size as the lens zooms.

1.2.9 Defog

Customized defog setup in case the fog environment may affect the video quality. It is to enhance video

resolution.

1.2.10 3D noise reduction

Support 3D noise reduction setup to reduce the camera noise under the low illumination environment. It is to

enhance video quality.

1.2.11 Action on Alarm

This series IR high definition speed dome has 7 alarm inputs (normal open or normal close) and 2 alarm

outputs (normal open). Alarms can be individually programmed to associated activation action(s) when

received. .

1.2.12 Auto Flip

As long as you continue to hold the keyboard joystick in the down position, the dome rotates 180 degrees

and repositions itself for uninterrupted viewing of any subjects that passes directly beneath the dome.

1.2.13 Self-diagnosis

There is a self diagnosis procedure when dome boots up.

zTilt and vertical engine check

zCamera diagnostics (mainly zoom function diagnosis)

zDisplay dome information.

1.2.14 Day/Night Mode (B/W & Color Mode)

Auto/manual switches in low illumination. There are several modes such as photoresistor, auto, manual and

etc. This function needs the speed dome driver (camera) supported.

1.2.15 Auto Focus

Support camera auto focus function.

1.2.16 Backlight Compensation

Balance the brightest and darkest sections of a scene to produce a more vivid picture.

1.2.17 Pan Tilt and Zoom

Supports zoom in and zoom out during tilt and pan movement.

You can still get vivid image even you set auto focus and auto iris during this period.

1.2.18 FD 3D Intelligent Positioning

Support 3D intelligent positioning function. The speed dome can auto track to the specified zone.

1.2.19 Idle Status

When there is no available order for specified duration, you can use menu to set dome idle status.

1.2.20 Image Stabilizer/Flip

You can enable image stabilizer function and flip in the menu.

When there is vibration, this IS function can guarantee video stability and when flip, you can view video

more clearly.

This function needs speed dome driver (camera) supported.

2Quick Configuration Tool

2.1 Overview

Quick configuration tool can search current IP address, modify IP address. At the same time, you can use it

to upgrade the device.

Please note the tool only applies to the IP addresses in the same segment.

2.2 Operation

Double click the “ConfigTools.exe”icon, you can see an interface is shown as in Figure 2-1.

In the device list interface, you can view device IP address, port number, subnet mask, default gateway,

MAC address and etc.

Figure 2-1

Select one IP address and then right click mouse, you can see an interface is shown as in Figure 2-2.

Note:

You can set the IP address, subnet mask and gateway for the network camera and PC. Please note network

camera IP address and PC IP address shall be in the same network segment if there is no router. Network

camera default IP address is 192.168.1.108. If there is a router, please set the corresponding gateway and

subnet mask.

The factory default user name is admin and password is admin. For security reasons, please modify your

password after you first login.

For detailed WEB operation, please refer to the Web Operation Manual in the resource CD.

Figure 2-2

Select the “Open Device Web” item; you can go to the corresponding web login interface. See Figure 2-3.

Figure 2-3

If you want to modify the device IP address without logging in the device web interface, you can go to the

configuration tool main interface to set.

In the configuration tool search interface (Figure 2-1), please select a device IP address and then double

click it to open the login interface. Or you can select an IP address and then click the Login button to go to

the login interface. See Figure 2-4.

In Figure 2-4, you can view device IP address, user name, password and port. Please modify the

corresponding information to login.

Please note the port information here shall be identical with the port value you set in TCP port in Web

Network interface. Otherwise, you can not login the device.

If you are using device background upgrade port 3800 to login, other setups are all invalid.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere E-line Sicherheitskamera Handbücher

E-line

E-line ELI-EPTZ-27DN Bedienungsanleitung

E-line

E-line ELI-SIP-B21-312R Bedienungsanleitung

E-line

E-line ELI?VDM Bedienungsanleitung

E-line

E-line ELI?EDC Bedienungsanleitung

E-line

E-line ELI-ACVI-ED72-4R Bedienungsanleitung

E-line

E-line ELI?EVC Bedienungsanleitung

E-line

E-line ELI-ANPTZ-56-37R Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung