Eachine TURBINE QX70 Bedienungsanleitung

c,encuirsiE

TURBINE

%•(-/Z7

Brand Name: Eachine

Wheelbase: 73mm

Fly Weight: 54g (with battery)

Size: 98.98.75mm

Flight controller: SP RACING F3_EVO_Brushed

Firmware version: Cleanflight 1.13.0

Coreless motor: 8520CW/CCW

Propeller: 40mm 4-Blade CW/CCW

Receiver option:

Versionl: Frsky compatible SBUS receiver

Version2: Flysky compatible PPM receiver

Version3: DSM2/DSMX Compatible Satellite receiver

Camera: 520TVL HD CMOS 1/4 inch Camera

AV Wireless Transmitter: 5.8g 25mw 48th

Battery: 3.7V 600mah Li-po

Video format : PAL/NTSC

Q)(

-7z/

Tiny FPV Quadeopter

Specification

Components

QTY

FRSKY

FLYSKY

DSM2/DSMX

Part NO.

QX70 Aircraft frame

Include

QX701

8520 coreless Motor

Include

QX95CW/CCW

F3_EVO_BRUSHED Built-in Frsky receiver

Include

QX702

F3_EVO_BRUSHED Built-in Flysky receiver

Include

QX702

F3_EVO_BRUSHED Built-in DSM2/DSMX receiver

Include

QX702

5.8G 48CH 25MW VTX with 520TVL Camera

Include

QX7OV

Camera mount

Include

QX703

Propellers(2pcs cw-r2pcs ccw)

Include

FB9OP

3.7V 600mah Lipo battery

Include

QX912

USB Charger

Include

QX95C

Propeller Disassembly tool

Include

FB907

USB cable

Include

QX70C

LED Rear light

Include

QX95L

www.eachine.com

.„

CH1

5740MHz

5705MHz

5865MHz

5658MHz

5733MHz

5362MHz

CH2

5760MHz

5685MHz

5845MHz

5695MHz

5752MHz

5399MHz

CH3

5780MHz

5665MHz

5825MHz

5732MHz

5771MHz

5436MHz

CH4

5800MHz

5645MHz

5805MHz

5769MHz

5790MHz

5473MHz

CH5

5820MHz

5885MHz

5785MHz

5806MHz

5809MHz

5510MHz

CH6

5840MHz

5905MHz

5765MHz

5843MHz

5828MHz

5547MHz

CH7

5860MHz

5925MHz

5745MHz

5880MHz

5847MHz

5584MHz

CH8

5880MHz

5945MHz

5725MHz

5917MHz

5866MHz

5621MHz

NTSC/PAL Switch

still touch up 20;

Short touch switch

to reverse video

display

Frequency

group A—F

selected still

touch up to 2S;

Channel chl—ch8

selected with

short touch.

CDC



767

Tiny FPV Quadeopter

CAUTION: Read and follow all instructions and warnings in the manual prior to setup or use. Failure to operate the product correctly can result

LU in damage to the product, personal property and/or injury. This is a sophisticated hobby product. It must be operated with caution and

common- sense and requires some basic mechanical ability.

1.General Product Safety Precautions

•

As the user of this product, you are responsible for operating it safely, not endangering yourself and others,or damaging the product or the

property of others.

•

Operate your product in open spaces away from people and property.

•

Never operate your product with damaged electrical components.

•

Keep the transmitter powered on while model is powered on.

•

Let parts cool after use before touching, motors will get hot in use.

•

Remove batteries after use, as applicable.

•

Keep all batteries, chemicals, small parts and anything electrical out of the reach of children.

•

Avoid water exposure to this product. Keep parts dry.

•

Keep moving parts clean.

2. 5.8G VTX channels list

www.eachine.com



-2-

4.Flight controller connection diagram

Binding Button(`Dal2,1( Verson without Eintlin

Button}

Power on while holding the button to ENT into bind mode

LED_STRIP

Power input

1S3. v LIPO

Green LED

Armed---Solid

Disarmed---Off

Blue LED

Receiver status

l'DSM2IX version s Oran

LED}

Buzzer

Q)(

-7z/

Tiny FPV Quadeopter

3.Charge the Flight Battery

NOTICE: Inspect the battery to make sure it is not damaged e.g., swollen, bent, broken or

punctured. Charge only batteries that are cool to the touch and are not damaged.

Charging with USB LI-Po Charger

Connect the battery to the USB Li-Po Charger,

then plug into the USB port of your computer

LED STATUS:

Solid Red LED --Charging

Solid Blue LED --Charge Complete

-3-



www.eachine.com



Tiny FPV Quadcopter

5.(Frsky version)Binding Procedure

1.Turn on the transmitter, select D8 mode for the Receiver.

2.Connect the battery to the Turbine QX70 while holding the binding button, the Blue LED will get be solid, this indicates the receiver get into

the binding mode.

www.eachine.com



-4-

.11T6tAlltei

Funcs

r'nal RF

nnel Range

1c.er

nal RF

Blue LED turns off

indicate binding successfully

Q)(

-7z/

Tiny FPV Quadeopter

3.Move to the Receiver [Bind] option in the transmitter and ENT to Bind with the receiver, The transmitter beeps.

4. The Blue LED on the board will turning off, this indicates that the bind process was successful. Reconnect the battery for the flight controller,

and the Blue LED on the receiver is solid again. It means connection is established with your transmitter

www.eachine.com

crx



_7zz,7

Tiny FPV Quadcopter

5.We have configured the Frsky receiver before shipping. If you flashed the firmware ,Please setup as the following steps: Enable Seria_RX for

UART2 and Set Receiver mode RX_SERIAL ,Select SBUS in Cleanflight or Betaflight Configurator.

•



-ii

■

t..

■

•111%

■

•

)ac •

can

ViSKC •

•

Receiver Mode

Rd_PRM



PPM RX Input

•

RX_SERIAL



Serial.besed receiver ISPEKSAT, S005, SUMO]

Rd_PARALLELPWM



PWM RX input one wire per channel)

RX_MSP



MSP RX inpur (contra! vie MSP parr)

Serial Receiver Provider

Not.:

Remember M Configure

Serial Port (via Ports lab) and Moore a Serial Receiver Provider when using

RX_SERIAL feature.

SFEKTRUM1024

SPEKTRUM204B



SUMD

SUMS

xeLiS _m00E_B

XBUS_MODE_B_RJOi

IBUS

www.eachine.com



-6-

D/DITAL TELEMETRY RAD/0 SYSTEM

PAGE

EXIT

CH1

CH2

CH3

CH4

CH6

CH?

5/64

100

EIThr

I I

EIRil

100 ElEle

100 EIRuci

WO RSA

-1170.611111111111



ENT1

ACLS-7

'°H

TARANIS -A/5

CEK



767

Tiny FPV Quadeopter

6.(Frsky version)Set the switch to ARM/DISARM the motor

1.Turn on the transmitter and move to the MIXER interface, Set "SA" or "SB" switch etc. for Ch5 to ARM/DISARM the motor.

2.The QX70 Frsky Version BNF was set AUX1(CH5) to ARM/DISARM the motor before shipping, you can also customize it.

-7-



www.eachine.com

Binding Button

Power on while holding the button.to ENT into bind mode

Released after bindin successfully

Green•LED

Armed—Solid

Disarmed---Offal

lue

LED

eceiver status

Solid- Works normal or Binding mode

BlingkirtiLost signal

Off -!Binding successfully

crx



_7zz,7

Tiny FPV Quadcopter

3.The default receiver channel map for frsky version is TAER1234, please ensure your transmitter is matched with it, otherwise it can't be armed.

■

21221:1

■

4.ER "_ -



•

abled

4.Toggle the Switch and the green LED on the flight controller will get be solid, this indicate the motor was armed ,enjoy yourself now !

www.eachine.com



-8-



-7z/

Tiny FPV Quadeopter

7.(Flysky Version)Binding procedure

1.Turn on your radio and Set receiver mode to AFHDS, then get your radio into binding mode(Take FLYSKY16 as an example)

1.Select RX setup to AFHDS Mode

2.Turn on the transmitter while

holding the bind button

-9-



www.eachine.com

Inhaltsverzeichnis

Andere Eachine Drohne Handbücher

Eachine

Eachine FB90 Bedienungsanleitung

Eachine

Eachine X220 V3 Bedienungsanleitung

Eachine

Eachine Lizard 105s Bedienungsanleitung

Eachine

Eachine V-tail 210 Bedienungsanleitung

Eachine

Eachine Wizard TS130 Bedienungsanleitung

Eachine

Eachine Wizard X220s Bedienungsanleitung

Eachine

Eachine QX105 BAT Bedienungsanleitung

Eachine

Eachine 520S Bedienungsanleitung

Eachine

Eachine Racer 250 Bedienungsanleitung

Eachine

Eachine QX105 BAT Bedienungsanleitung

Eachine

Eachine US65 Bedienungsanleitung

Eachine

Eachine TYRO129 Bedienungsanleitung

Eachine

Eachine Novice IV Bedienungsanleitung

Eachine

Eachine Novice-IV 3-4S 4inch LR drone RTF Bedienungsanleitung

Eachine

Eachine E013 Bedienungsanleitung

Eachine

Eachine TYRO79 Bedienungsanleitung

Eachine

Eachine TYRO69 Bedienungsanleitung

Eachine

Eachine TYRO99 Bedienungsanleitung

Eachine

Eachine Novice-III Bedienungsanleitung

Eachine

Eachine E58 Bedienungsanleitung

Eachine

Eachine EX3 Bedienungsanleitung

Eachine

Eachine 1S Cinefun 75mm 1080P/ 4K Cinewhoop Bedienungsanleitung

Eachine

Eachine Wizard X220HV Bedienungs- und Wartungsanleitung

Eachine

Eachine RACER 180 Bedienungsanleitung

Beliebte Drohne Handbücher anderer Marken

Ryze

Ryze Tello Bedienungsanleitung

PowerVision

PowerVision PowerRay Bedienungsanleitung

Force1

Force1 rogue F72 Bedienungsanleitung

Zerotech

Zerotech DOBBY Bedienungsanleitung

Protocol

Protocol VIDEODRONE AP Bedienungsanleitung

dji

dji Matrice M210 Bedienungsanleitung

MAKE

MAKE Terry Kilby Bedienungsanleitung

SYMA

SYMA X440 Bedienungsanleitung

RUKO

RUKO F11 Bedienungsanleitung

SYMA

SYMA X5UW(720P) Bedienungsanleitung

Dynali

Dynali 25 H Leitfaden

dji

dji PHANTOM 4 Bedienungsanleitung

Atlas

Atlas AtlasPRO Bedienungsanleitung

Twodots

Twodots TVVIN BOARD Bedienungsanleitung

GDU

GDU SAGA Bedienungsanleitung

Ares

Ares ETHOS QX 130 Bedienungsanleitung

Walkera

Walkera ZHUN Bedienungsanleitung

dji

dji WIND-4 Bedienungsanleitung