PART #353672
EG9992 Revised 03/05
Step 1
Locate the two screw holes nearest to each end of either
drawer slide.
Parts List
# qty part # description
#1 2 336255 Drawer Mounting Bracket
#2 4 313630 #12 x 3⁄4˝ Drive Screw
#3 2 300697 18˝ Drawer Slide
#4 4 301492 #10 Lock Washer
#5 4 300755 #10-24 Hex Nut
#6 1 Drawer Pan
#1
drawer
mounting bracket
hole used to attach
bracket to angle
framing of table
top set of holes
for tables with
rolled edges
middle set of holes
for tables with
square edges
bottom set of holes
for tables with
box marine edges
Eagle Foodservice Equipment, Eagle MHC, SpecFAB, and Retail Display are divisions of Eagle Group.©2005 by the Eagle Group
• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A. • www.eaglegrp.com
• Phone: 302/653-3000 • (Foodservice) 800/441-8440 • (MHC/Retail) 800/637-5100
• Fax: 302/653-2065 or 302/653-3036
screw hole screw hole
slide
#313630
pan head screw
bracket
#301492
lock washer
#300755
hex nut
pin with
black caps
#1
#2
#3
#3
#6
#4
#5
Before assembly:
• Determine applicable sets of holes
in brackets.
left-hand
bracket/slide assembly
right-hand
bracket/slide assembly
Step 2
Attach drawer slides to drawer brackets using hardware included.
Assemblies should
look like these
when completed.
ASSEMBLY INSTRUCTIONS
Drawers for Tables
with Angle Frame
(Drawers #500772, 501571, 502941, and 502942)
