Precautions for use：
1. Open the package and check whether the following accessories are complete
1*Portable Power Station; 1*AC Adapter Charger; 1*User Manual; 1*Qualified Certificate;
Please check carefully whether the portable power station device is damaged during transportation. If you find that the
device is damaged or parts are missing, please do not start the device, and immediately notify the carrier and dealer.
2. The portable power station device should be placed in a well-ventilated place away from water, flammable gases and
corrosive substances.
3. Do not place it on its side, keep the bottom and panel of the portable power station uncovered.
4. The panel temperature and the working environment temperature of the portable power station should be kept
between 0~40℃.
5. If the portable power station device is disassembled and used at low temperature, water condensation may occur. It
must be used until the inside and outside of the device are completely dry, otherwise there will be a danger of electric
shock.
Points for attention:
The portable power station device has high voltage AC output, which is potentially dangerous and must be handled with
care and kept away from children, otherwise there will be a risk of electric shock.
Do not connect the inverter of the portable power station to the AC circuit, otherwise even if the switch of the device is
turned off, the inverter of the device may be damaged.
Please ensure that the power used by the electrical appliance is less than the rated output power of the portable power
station device.
Before the load is connected to the portable power station device, be sure to turn off the load switch before connecting it,
and then turn on the load switch for use.
It is recommended to charge the portable power station device for at least 10 hours before use. Insert the AC adapter
charger into the portable power station’s charging port when charging. The portable power station device can also be
used without charging, but the backup time will be less than the standard backup time.
It is prohibited to connect half wave (hair dryer, electric heating wire heater) load, high-power motor, laser printer,
high-power rectifier load. The portable power station will be automatically protected because of the excessive starting
power during operation.
Description of protection functions and application scenarios:
1. Protection functions: over voltage protection, over current protection, over temperature protection, overcharge
protection, short circuit protection, under voltage protection.
2. Application scenarios: home emergency power supply, outdoor camping power supply, night construction power
supply, emergency rescue power supply, etc.
Use load type:
1. AC fans, DC fans, AC LED lights, DC LED lights, digital products, mobile phones, desktop computers, notebook
computers, TVs, vacuum cleaners, etc.
