EarthQuake ECS8.0 Bedienungsanleitung

Earthquake Sound reserves the right to amend details of the specifications without notice.

Earthquake Sound Corporation • 2727 McCone Avenue Hayward CA, 94545

Phone: 510-732-1000 Fax: 510-732-1095

ECS

The Sound That Will Move You

Edgeless High Fidelity

In-Ceiling Speaker Series

Installation Manual

www. sound.comearthquake

ECS6.5 & ECS8.0

ECS6D & ECS8D

www.earthquakesound.com 3

ThankyouforpurchasingtheECS,EdgelessSeriesofIn-CeilingSpeakers;one

of Earthquake Sound's most valued in-Ceilingl speaker lines. Designed with

aesthetics and sound quality in mind, the ECS seamlessly blends into its

surroundingasitprovidesalifetimeofdurabilityandhigh-endperformance.

It is very important to read and follow all installation/mounting instructions and

recommendationsinthismanualthoroughlytoensureoptimalperformanceand

longevity.

Dear Valued Customer,

WARNING: These products are

capable of generating high

sound pressure levels. You

should exercise caution when

operating these speakers. Long

term exposures to high levels of

soundpressurewillcausepermanentdamage

to your hearing. Sound pressure levels

exceeding 85dB can be dangerous with

constant exposure, set your audio system to a

comfortable loudness level. Earthquake

Sound Corporation does not assume liability

for damages resulting from the direct use of

Earthquakespeakers,andurgesuserstoplay

volumeatmoderatelevels.

Customer Support

[email protected]

Tel: 800-576-7944

Fax: 510-732-1095

Earthquake Sound Corporation

2727 McCone Avenue

Hayward, CA 94545

Tel: 510-732-1000

Fax: 510-732-1095

The Sound That Will Move You

S O U N D

The Sound That Will Move You

S O U N D

This document should not be construed as a commitment on the part of Earthquake Sound

Corporation. The information is subject to change without notice. Earthquake Sound Corporation

assumes no responsibility for errors that may appear within this document.

Calls attention to a procedure,

practice, condition or the like that, if

not correctly performed or adhered to,

could result in injury or death.

Calls attention to a procedure,

practice, condition or the like that, if

not correctly performed or adhered to,

could result in damage to or

destruction of part or all of the product.

Specifications are subject to change without notice

4www.earthquakesound.com 5

ECSD Features & FunctionsECS Features & Functions

ECS6.5 & ECS8.0

The ECS Features

» Frameless design for reduced visibility/low profile/seamless blend

» Long excursion kevlar woofer cones

» One 1” (25mm) silk dome NEO swiveling tweeter

» ± 3dB bass and treble controls

» Elaborate crossover networks with polyswitch protection

» Easy Turn-N-Lock™ installation mechanism

» Gold plated, spring loaded terminals

» Magnetically attached, paintable grilles

The ECSD Features

» Frameless design for reduced visibility/low profile/seamless blend

» Long excursion kevlar woofer cones

» Two 1” (25mm) silk dome NEO swiveling tweeters

» Dual voice coil woofer

» ± 3dB bass and treble controls

» Dipole / Bipole modes

» Surround / DVC modes

» Elaborate crossover networks with polyswitch protection

» Easy Turn-N-Lock™ installation mechanism

» Gold plated, spring loaded terminals

» Magnetically attached, paintable grilles

ECS6D & ECS8D

The Edgeless In-Ceiling Dual speakers are designed for use in limited/small

spaces like bathrooms, kitchens, corridors, etc... They feature dual tweeters

and dual woofer voice coils (2 speakers in 1): one ECSD is capable of

reproducingastereosignal;thuseliminatingtheneedtousetwospeakers.

The Edgeless In-Ceiling speakers are designed for use in any space like

bedrooms, living rooms, kitchens, etc... Each features a single 1” Neo tweeter

and a long excursion woofer. The ECS seamlessly blend into surrounding as

theyprovidealifetimeofdurabilityandhigh-endperformance.

Specifications are subject to change without notice

6www.earthquakesound.com 7

ECS6D Settings & OptionsECS6D Settings & Options

Bipole Dipole

High Definition Stereo application using one (1) ECS6D:

- Set switch #1 in Dipole mode

- Set switch #2 in DVC mode

- Impedance 8-Ohm per terminal

- Connect both terminals A & B separately (2 separate inputs / left & right)

Surround Effect Stereo application using one (1) ECS6D:

- Set switch #1 in Dipole mode

- Set switch #2 in Surround mode

- Impedance 8-Ohm per terminal

- Connect both terminals A & B separately (2 separate inputs / left & right)

Bipole Dipole

Surround DVC

Mono application using one (1) ECS6D:

- Set switch #1 in Bipole mode

- Set switch #2 in DVC mode

- Total impedance 4-Ohm

- Connect one (1) terminal A OR B (1 input)

Surround Effect Mono application using one (1) ECS6D:

- Set switch #1 in Bipole mode

- Set switch #2 in Surround mode

- Total impedance 4-Ohm

- Connect one (1) terminal A OR B (1 input)

Bipole Dipole

Surround DVC

Bipole Dipole

Surround DVC

Bipole Dipole

Surround DVC

Bipole Dipole

1/2 = 8-Ohm

3/4 = 8-Ohm

1/2 = 8-Ohm

3/4 = 8-Ohm

1/2 = 8-Ohm

3/4 = 8-Ohm

Surround DVC

1_ _

Terminal A Terminal B

1_ _

Terminal A Terminal B

(connect both terminals A & B)

1_ _

Terminal A Terminal B

(connect one terminal A or B)

1_ _

Terminal A Terminal B

(connect one terminal A or B)

1_ _

Terminal A Terminal B

(connect both terminals A & B)

1_ _

Terminal A Terminal B

(connect one terminal A or B)

TheECS6Disequippedwithtwo(2)switches:theBipole/Dipoleswitchandthe

Surround/DVC switch. The two switches work independently, they are used to

customizetheECS6Dperformancefordifferentapplications.

In Dipole mode, the speaker is in STEREO mode (2 speakers in 1). The two

terminals are totally independent (2 separate inputs, using both terminals).

Eachterminalhasanimpedanceof8-Ohm.ThespeakercanbesetinSurround

or in DVC mode depending on the listener preferences. In Bipole mode, the

speaker is in MONO mode. The two terminals are internally connected in

parallel(1 inputneeded, usingonly oneterminal).The totalspeaker impedance

is4-Ohm.Again, hespeaker canbe setin Surroundor inDVC modedepending

onthelistenerpreferences.

InDVC mode, thespeakerexhibits higherlevelofdetails &separationbetween

L & R channels. The Surround mode gives the speaker response more

surround feeling, deeper warmer bass & more blending between L & R

channels.

Specifications are subject to change without notice

8www.earthquakesound.com 9

ECS8D Settings & Options

High Definition Stereo application using one (1) ECS8D:

- Set switch #1 in Dipole mode

- Set switch #2 in DVC mode

- Impedance 8-Ohm per terminal

- Connect both terminals A & B separately (2 separate inputs / left & right)

Surround Effect Stereo application using one (1) ECS8D:

- Set switch #1 in Dipole mode

- Set switch #2 in Surround mode

- Impedance 8-Ohm per terminal

- Connect both terminals A & B separately (2 separate inputs / left & right)

Bipole Dipole

Surround DVC

Mono application using one (1) ECS8D:

- Set switch #1 in Bipole mode

- Set switch #2 in DVC mode

- Total impedance 4-Ohm

- Connect one (1) terminal A OR B (1 input)

Surround Effect Mono application using one (1) ECS8D:

- Set switch #1 in Bipole mode

- Set switch #2 in Surround mode

- Total impedance 4-Ohm

- Connect one (1) terminal A OR B(1 input)

Bipole Dipole

Surround DVC

Bipole Dipole

Surround DVC

Bipole Dipole

Surround DVC

ECS8D Settings & Options

1/2 = 8-Ohm

3/4 = 8-Ohm

1/2 = 8-Ohm

3/4 = 8-Ohm

_ _

+ +

Terminal A Terminal B

(connect both terminals A & B)

_ _

+ +

Terminal A Terminal B

(connect both terminals A & B)

_ _

+ +

Terminal A Terminal B

(connect one terminal A or B)

_ _

+ +

Terminal A Terminal B

(connect one terminal A or B)

Bipole Dipole

1/2 = 8-Ohm

3/4 = 8-Ohm

Surround DVC

_ _

+ +

Terminal A Terminal B

(connect one terminal A or B)

_ _

+ +

Terminal A Terminal B

(connect both terminals A & B)

TheECS8Disequippedwithtwo(2)switches:theBipole/Dipoleswitchandthe

Surround/DVC switch. The two switches work independently, they are used to

customizetheECS6Dperformancefordifferentapplications.

In Dipole mode, the speaker is in STEREO mode (2 speakers in 1). The two

terminals are totally independent (2 separate inputs, using both terminals).

Eachterminalhasanimpedanceof8-Ohm.ThespeakercanbesetinSurround

or in DVC mode depending on the listener preferences. In Bipole mode, the

speaker is in MONO mode. The two terminals are internally connected in

parallel(1 inputneeded, usingonly oneterminal).The totalspeaker impedance

is4-Ohm.Again, hespeaker canbe setin Surroundor inDVC modedepending

onthelistenerpreferences.

InDVC mode, thespeakerexhibits higherlevelofdetails &separationbetween

L & R channels. The Surround mode gives the speaker response more

surround feeling, deeper warmer bass & more blending between L & R

channels.

Specifications are subject to change without notice

10 www.earthquakesound.com 11

Simply tighten the screws by hand using a

screwdriver to prevent the mounting ears

from snapping. Some resistance may occur

the first few turns of the screw as it makes its

paththroughtheplastic.

Easy Installation Steps

Cut the hole:

using the provided

cut out template

Wire the speaker:

using the non-obtrusive

spring-loaded speaker

terminals

Mount the speaker:

by utilizing the

Turn-N-Lock™

installation mechanisms

Placement Considerations

SpeakerPlacement

The ECS Edgeless In-Ceiling Speakers are designed to be flush mounted in

walls or ceilings. For optimal acoustical performance, simply follow these

guidelines:

1.Placespeakersatanequaldistance(left/right)fromlistener.

2.Speakersmustbespacedata40-60°anglefromlistener(Figure1).

3.Aimtweetertowardsthelistener’searwheninlisteningposition.

Figure 1

40 - 60°

TREBLE BASS

-3

TREBLE BASS

-3

GrillePaintingGuidelines

The ECS Edgeless In-Ceilingl Speaker grilles are paintable and can accept

virtuallyanytypeofpaint.Westronglyrecommendthefollowing:

1.Removethegrillesfromthespeakerspriortopaintingthem.

2. Thin the paint prior to application, if needed. Spray and roller paint

applications typically provide the best results. Note that you may need to

apply multiple thin layers of paint to achieve the desired shade without

losingsoundqualityduetocloggingofthegrilles.

3. Let the painted grilles fully dry before mounting them back on the

speakers.

Specifications Specifications

www.earthquakesound.com

Specifications are subject to change without notice

12 13

E C S 6 . 5 SP EC I FI CAT IO N S

Frequency Response:

Sensitivity:

Nominal Impedance:

Power Handling:

Enclosure Material / Type:

Driver Components:

40Hz - 20kHz

87dB @ 1W/1M

8-Ohm

300 Watts Max

Impact resist ABS Plastic

Grille Finish: White / Paintable

Mounting Depth: 4 5/16” (110mm)

Cut Out Diameter: 7 7/8” (200mm)

Outer Diameter: 8 9/16” (223mm)

Two-way system using:

one 6.5” low mass stiff kevlar

cone midbass and one 1” silk

dome swiveling NEO tweeter

Wire Gauge Recommended: 12

Weight Per Speaker: 3.9 lbs

E C S 8 . 0 SP EC I FI CAT IO N S

Frequency Response:

Sensitivity:

Nominal Impedance:

Power Handling:

Enclosure Material / Type:

Driver Components:

30Hz - 20kHz

88dB @ 1W/1M

8-Ohm

400 Watts Max

Impact resist ABS plastic

Two-way system using:

one 8” low mass stiff kevlar

cone midbass and one 1” silk

dome swiveling NEO tweeter

Grille Finish: White / Paintable

Wire Gauge Recommended:

Weight Per Speaker:

4.3 lbs

Mounting Depth: 4 7/8” (124mm)

Outer Diameter:

Cut Out Diameter: 9 1/2” (242mm)

10 1/2” (267mm)

4 7/8” (124mm)

Ø 10 1/2” (267mm)

Ø 9 1/2” (242mm)

4 5/16” (110mm)

Ø 8 9/16” (223mm)

Ø 7 7/8” (200mm)

Specifications Specifications

www.earthquakesound.com

Specifications are subject to change without notice

14 15

E C S 6 D SP EC I FI CAT IO N S

Frequency Response:

Sensitivity:

Nominal Impedance:

Power Handling:

Enclosure Material / Type:

Driver Components:

40Hz - 20kHz

87dB @ 1W/1M

8-Ohm In Dipole Mode

4-Ohm In Bipole Mode 8-Ohm In Dipole Mode

4-Ohm In Bipole Mode

350 Watts Max

Impact resist ABS Plastic

Grille Finish: White / Paintable

Mounting Depth: 4 5/16” (110mm)

Cut Out Diameter: 7 7/8” (200mm)

Outer Diameter: 8 9/16” (223mm)

Two-way system using:

one 6.5” low mass stiff kevlar

cone midbass and two 1” silk

dome swiveling NEO tweeters

Wire Gauge Recommended: 12

Weight Per Speaker: 4 lbs

E C S 8 D SP EC I FI CAT IO N S

Frequency Response:

Sensitivity:

Nominal Impedance:

Power Handling:

Enclosure Material / Type:

Driver Components:

30Hz - 20kHz

88dB @ 1W/1M

450 Watts Max

Impact resist ABS plastic

Two-way system using:

one 8” low mass stiff kevlar

cone midbass and two 1” silk

dome swiveling NEO tweeters

Grille Finish: White / Paintable

Wire Gauge Recommended:

Weight Per Speaker:

4.5 lbs

Mounting Depth: 4 7/8” (124mm)

Outer Diameter:

Cut Out Diameter: 9 1/2” (242mm)

10 1/2” (267mm)

4 5/16” (110mm)

Ø 8 9/16” (223mm)

Ø 7 7/8” (200mm)

4 7/8” (124mm)

Ø 10 1/2” (267mm)

Ø 9 1/2” (242mm)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere EarthQuake Sprecher Handbücher

EarthQuake

EarthQuake Focus series Beilage

EarthQuake

EarthQuake SWS-6.5X Installations- und Betriebsanleitung

EarthQuake

EarthQuake SweetSpot SS-Series Bedienungsanleitung

EarthQuake

EarthQuake Tigris Bedienungsanleitung

EarthQuake

EarthQuake EQ8C8 Bedienungsanleitung

EarthQuake

EarthQuake EQ6S8 Bedienungsanleitung

EarthQuake

EarthQuake EQ8 Bedienungsanleitung

EarthQuake

EarthQuake EQ88 Bedienungsanleitung

EarthQuake

EarthQuake EWS530C Bedienungsanleitung

EarthQuake

EarthQuake ECSSS82 Bedienungsanleitung

EarthQuake

EarthQuake EQ6C4 Bedienungsanleitung

EarthQuake

EarthQuake IMAGE-X Bedienungsanleitung

EarthQuake

EarthQuake Image-846X Bedienungsanleitung

EarthQuake

EarthQuake EQ12S8 Bedienungsanleitung

EarthQuake

EarthQuake EQ6CS Bedienungsanleitung

EarthQuake

EarthQuake EWSLA63 Bedienungsanleitung

EarthQuake

EarthQuake Granite-52 Bedienungsanleitung

EarthQuake

EarthQuake EQ8C4 Bedienungsanleitung

EarthQuake

EarthQuake Titan Telesto Bedienungsanleitung

EarthQuake

EarthQuake TNT - T693 Bedienungsanleitung

EarthQuake

EarthQuake TNT-T46 Bedienungsanleitung

EarthQuake

EarthQuake Focus F3.5 Bedienungsanleitung

EarthQuake

EarthQuake EQ6C8 Bedienungsanleitung

EarthQuake

EarthQuake F3.5R Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung