Earthworks Audio ICON Bedienungsanleitung

For more information, please visit

www.earthworksaudio.com or call 1-603-654-2433.

STUDIO-QUALITY

USB STREAMING MICROPHONE

ICON

1 ICON USB Microphone with Custom Triad-Orbit Stand

1 USB Cable

YOUR PURCHASE INCLUDES

Thank you for purchasing the

Earthworks ICON USB Streaming Microphone!

The ICON is class-compliant, so users don't need to install a driver on any OS in order to use it

Begin by removing all included components from the packaging. Make sure to mute any incoming

signal to speakers or headphones to avoid any loud “pops” when connecting. Connect the microphone

to your given device with a USB port. Conrm in your computer's settings that ICON is recognized as

an audio device (appearing as "USB Audio CODEC").

When using your ICON, be sure to take advantage of its features, such as:

• Gain Knob: This can be found on the back of the microphone, as shown above. The center position

is the default setting, and is best for speech at a medium-loud volume from 3 inches away. The knob

can be adjusted depending on your distance from the microphone. Turning it right increases the

gain, and turning it left lowers the gain. (When turning, you will also feel a click when the knob is at

the center position. Use this as an indicator of its position when you're not looking at the back.)

• If the ICON is set as your computer’s output device, the computer’s master output volume

will control the ICON’s output level. If it isn’t set as the output device, you can adjust it in your

computer’s control panel. If you’re using a smart device like an iPhone or iPad, you can control

the ICON’s volume using the device’s master volume control.

• Haptic Analog Mute Switch: This can be activated by pushing in on the gain knob on the back

of the microphone. Think of this as the microphone's E-Brake; when engaged, no sound will pass

through. We've included it as an additional safety level beyond the digital mute on your computer.

When pressing the knob, you will also hear an audible click sound to indicate you've been muted.

(The click sound will not occur when unmuting the microphone.)

• LED Indicators: Found under the microphone, where the body meets the ball joint, the LED

indicator will light up depending on these criteria:

• Blue: the microphone is plugged in and powered on.

• Green: the computer is actively streaming audio from the microphone.

• Red: the analog circuitry in the microphone is clipping.

• Low Handling Noise: We've paid special attention to making sure the ICON does not make noise

when you move it. As such, feel free to touch/move/adjust the microphone while it is powered on -

and know that you will experience very little noise while doing so.

• Integrated M2-R Ball Adapter: The ICON can be unscrewed from its included Triad-Orbit stand and

mounted on any microphone stand or boom mount.

GETTING STARTED

USING YOUR ICON

SPECIFICATIONS

37 Wilton Rd. Milford, NH 03055

(603) 654-2433

info@earthworksaudio.com

earthworksaudio.com

To guarantee your microphone provides years of performance, follow these guidelines:

• Avoid extreme heat and condensing humidity. Allow the microphone to warm up when bringing it

in from the cold.

• Rough handling may damage the microphone even if no markings are visible.

• When not in use, keep the microphone in its box.

• Windows users intending to record audio using a Digital Audio Workstation (DAW) with ASIO drivers

will want to install the free ASIO4ALL driver (www.asio4all.org). Doing so will guarantee the lowest-

possible latency for real-time monitoring and playing software instruments.

• If you wish to use the ICON with a smart device, be sure you have an adapter that can simultaneously

connect the mic to the device while supplying external power. For example, we would recommend

the Apple Lightning to USB 3 Camera Adapter.

If you encounter issues while using your Earthworks Audio microphone, please make sure that:

• Your USB cable is well connected on both ends.

• Your microphone is confirmed as an input device on your computer.

• The microphone is positioned at an appropriate distance from the sound source.

• External noise in your recording environment is kept to a minimum.

• Your recording space is at room temperature and free of dust.

If your issue persists after checking, please contact us via our website.

TROUBLESHOOTING

PROPER MAINTENANCE

ADVANCED USE

WARRANTY The ICON and ICON Pro carry a two-year limited warranty (parts and labor). Please register your warranty at:

earthworksaudio.com/register. If you have any problems with your Earthworks products, please contact our

warranty/repair department by email at: service@earthworksaudio.com.

NOTE: This warranty only applies to Earthworks microphones purchased brand new. For microphones purchased/

received second-hand, please contact us via our website.

WE'RE HERE

TO HELP

For anything else, we're a phone call or email away. Please feel free to contact us by email at

info@earthworksaudio.com, or by phone at (603)-654-2433.

ICON

Frequency Response 20Hz-20kHz

Polar Pattern Cardioid

Peak Acoustic input 132dB SPL

Connection Micro USB to USB A

Power Source USB Bus Power

Power Consumption 70 mA at 5V (Bus Power)

Typical Headphone

impedance

16 Ohms

Headphone Output Power 50 mW (at 16 Ohms)

Color Stainless Steel

Dimensions 5.53" x 1.6"

Weight 1.5lb

Andere Earthworks Audio Mikrofon Handbücher

Earthworks Audio

Earthworks Audio SR40/HC Bedienungsanleitung

Earthworks Audio

Earthworks Audio SR117 Bedienungsanleitung

Earthworks Audio

Earthworks Audio FW430 Bedienungsanleitung

Earthworks Audio

Earthworks Audio SR5314 Bedienungsanleitung

Earthworks Audio

Earthworks Audio SR20 Bedienungsanleitung

Earthworks Audio

Earthworks Audio M23 Bedienungsanleitung

Earthworks Audio

Earthworks Audio SR20LS Bedienungsanleitung

Earthworks Audio

Earthworks Audio SR20LS Bedienungsanleitung

Earthworks Audio

Earthworks Audio DM20 Bedienungsanleitung

Earthworks Audio

Earthworks Audio QTC30 Bedienungsanleitung

Earthworks Audio

Earthworks Audio SR30 Bedienungsanleitung

Earthworks Audio

Earthworks Audio SR30 Bedienungsanleitung

Earthworks Audio

Earthworks Audio SR40V Bedienungsanleitung

Earthworks Audio

Earthworks Audio QTC50 Bedienungsanleitung

Earthworks Audio

Earthworks Audio QTC40 Bedienungsanleitung

Earthworks Audio

Earthworks Audio ICON Bedienungsanleitung

Earthworks Audio

Earthworks Audio IM Series Bedienungsanleitung

Earthworks Audio

Earthworks Audio SV33 Bedienungsanleitung

Earthworks Audio

Earthworks Audio C30 Bedienungsanleitung

Earthworks Audio

Earthworks Audio TC20 Bedienungsanleitung

Earthworks Audio

Earthworks Audio QTC40 Bedienungsanleitung

Earthworks Audio

Earthworks Audio SR314 Bedienungsanleitung

Earthworks Audio

Earthworks Audio M23 Bedienungsanleitung

Earthworks Audio

Earthworks Audio PM40T Bedienungsanleitung

Beliebte Mikrofon Handbücher anderer Marken

IK Multimedia

IK Multimedia iRig Stream MIC PRO Bedienungsanleitung

DAPAudio

DAPAudio RM-101 Bedienungsanleitung

AKG

AKG CHM 21 Bedienungsanleitung

Sennheiser

Sennheiser evolution wireless series EM 100 Bedienungsanleitung

Sony

Sony C-48 Bedienungsanleitung

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG Bedienungsanleitung

Shure

Shure WH30TQG Bedienungsanleitung

auna PRO

auna PRO MIC-900 Bedienungsanleitung

AKG

AKG D 3800 Bedienungsanleitung

Shure

Shure KSM141 Bedienungsanleitung

MAIIN SOUND

MAIIN SOUND IIN style Bedienungsanleitung

Earthworks

Earthworks TC25 Bedienungsanleitung

Sennheiser

Sennheiser evolution D1 Bedienungsanleitung

Alesis

Alesis MicLink Wireless Bedienungsanleitung

DSPPA

DSPPA D6234 Bedienungsanleitung

Monacor

Monacor IMG STAGELINE ECM-300B Bedienungsanleitung

Ansr Audio

Ansr Audio Scan16 Bedienungsanleitung

Shure

Shure MXA710 Series Bedienungsanleitung