Earthworks Audio QTC40 Bedienungsanleitung

For more information, please visit

www.earthworksaudio.com or call 1-603-654-2433.

OMNIDIRECTIONAL MICROPHONE FOR QUIET SOURCES

QTC40

1 Earthworks QTC50

1 Microphone Clip

1 Calibration Chart

YOUR PURCHASE INCLUDES

Thank you for purchasing the

Earthworks QTC40 Omnidirectional Microphone!

Before setting up the microphone, pull back all existing settings and EQ. By doing this, you will have a

baseline understanding of how our microphones sound, and will then be able to adjust accordingly.

Begin by removing all included components from the packaging. Make sure to mute any incoming

signal to speakers or headphones to avoid any loud “pops” when connecting.

Connect the microphone to an audio interface supplying 24-48V phantom power using a standard

XLR cable. Because of the microphone’s larger capsule size, please allow one minute for the

microphone to settle. (Plugging in the microphone while phantom power is turned on will not damage

the microphone, and will actually settle the microphone faster.)

To guarantee your microphone provides years of performance, follow these guidelines:

• Avoid touching the front protective screen.

• Never attempt to disassemble the microphone - it cannot be opened.

• Avoid extreme heat and condensing humidity. Allow the microphone to warm up when bringing it

in from the cold.

• Rough handling may damage the microphone even if no markings are visible.

• When not in use, keep the microphone in its case.

GETTING STARTED

PROPER

MAINTENANCE

The small tip on many of our microphones allows them to capture the highest frequencies of

your sound. Please be gentle and considerate when handling the microphones with these tips.

(Microphones such as the SR314 and SR40V shield the tip within their capsule, and are thus

more durable.)

IMPORTANT

NOTICE

SPECIFICATIONS QTC40

Frequency Response 3Hz to 40kHz +1/-3dB

Polar Pattern Omnidirectional

Sensitivity 34mV/Pa (Typical)

Power Requirements 24-48V Phantom, 10mA

Peak Acoustic Input 140dB SPL

Output XLR-3

Output Impedance 65Ω, balanced between pins 2 & 3

Minimum Output Load 600Ω, balanced between pins 2 & 3

Noise 20dB SPL (A weighted)

Dimensions 229 x 22 mm (9 x .860 in.)

Weight 225g (.5lb)

WARRANTY All Earthworks® products carry a limited warranty (parts and labor). Please register your warranty at:

earthworksaudio.com/register. If you have any problems with your Earthworks products, please contact our

warranty/repair department by email at: returns@earthworksaudio.com.

NOTE: This warranty only applies to Earthworks microphones purchased brand new. For microphones purchased/

received second-hand, please contact us via our website.

37 Wilton Rd. Milford, NH 03055

(603) 654-2433

sales@earthworksaudio.com

earthworksaudio.com

If you encounter issues while using your Earthworks Audio microphone, please make sure that:

• Your microphone is connected to an active power supply.

• Phantom power is being supplied to the microphone.

• Your microphone and XLR cable are well connected.

• The microphone is positioned at an appropriate distance from the sound source.

• External noise in your recording environment is kept to a minimum.

• Your recording space is at room temperature and free of dust.

If your issue persists after checking, please contact us via our website.

TROUBLESHOOTING

WE'RE HERE TO

HELP

For anything else, we're a phone call or email away. Please feel free to contact us by email at sales@

earthworksaudio.com, or by phone at (603)-654-2433.

Andere Earthworks Audio Mikrofon Handbücher

Earthworks Audio

Earthworks Audio M23R Bedienungsanleitung

Earthworks Audio

Earthworks Audio ICON PRO Bedienungsanleitung

Earthworks Audio

Earthworks Audio SR25 Bedienungsanleitung

Earthworks Audio

Earthworks Audio SR117 Bedienungsanleitung

Earthworks Audio

Earthworks Audio ICON Bedienungsanleitung

Earthworks Audio

Earthworks Audio SR314 Bedienungsanleitung

Earthworks Audio

Earthworks Audio SR3314 Bedienungsanleitung

Earthworks Audio

Earthworks Audio TC20 Bedienungsanleitung

Earthworks Audio

Earthworks Audio SR40V Bedienungsanleitung

Earthworks Audio

Earthworks Audio SR20 Bedienungsanleitung

Earthworks Audio

Earthworks Audio SR40/HC Bedienungsanleitung

Earthworks Audio

Earthworks Audio C30 Bedienungsanleitung

Earthworks Audio

Earthworks Audio ETHOS Bedienungsanleitung

Earthworks Audio

Earthworks Audio SR30 Bedienungsanleitung

Earthworks Audio

Earthworks Audio DM20 Bedienungsanleitung

Earthworks Audio

Earthworks Audio ICON PRO XLR Bedienungsanleitung

Earthworks Audio

Earthworks Audio QTC30 Bedienungsanleitung

Earthworks Audio

Earthworks Audio FW730 Bedienungsanleitung

Earthworks Audio

Earthworks Audio IM Series Bedienungsanleitung

Earthworks Audio

Earthworks Audio SR5314 Bedienungsanleitung

Earthworks Audio

Earthworks Audio SV33 Bedienungsanleitung

Earthworks Audio

Earthworks Audio M23 Bedienungsanleitung

Earthworks Audio

Earthworks Audio QTC40 Bedienungsanleitung

Earthworks Audio

Earthworks Audio PM40T Bedienungsanleitung

Beliebte Mikrofon Handbücher anderer Marken

IK Multimedia

IK Multimedia iRig Stream MIC PRO Bedienungsanleitung

DAPAudio

DAPAudio RM-101 Bedienungsanleitung

AKG

AKG CHM 21 Bedienungsanleitung

Sennheiser

Sennheiser evolution wireless series EM 100 Bedienungsanleitung

Sony

Sony C-48 Bedienungsanleitung

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG Bedienungsanleitung

Shure

Shure WH30TQG Bedienungsanleitung

auna PRO

auna PRO MIC-900 Bedienungsanleitung

AKG

AKG D 3800 Bedienungsanleitung

Shure

Shure KSM141 Bedienungsanleitung

MAIIN SOUND

MAIIN SOUND IIN style Bedienungsanleitung

Earthworks

Earthworks TC25 Bedienungsanleitung

Sennheiser

Sennheiser evolution D1 Bedienungsanleitung

Alesis

Alesis MicLink Wireless Bedienungsanleitung

DSPPA

DSPPA D6234 Bedienungsanleitung

Monacor

Monacor IMG STAGELINE ECM-300B Bedienungsanleitung

Ansr Audio

Ansr Audio Scan16 Bedienungsanleitung

Shure

Shure MXA710 Series Bedienungsanleitung