Easymate 340511 Bedienungsanleitung
1080P WIFI IP CAMERA
Outdoor Surveillance Camera
Ref. 340511
V1
Safely monitor your outdoors.
Easy to install and discreet, it helps you keep your home secure by sending
notifications to your smartphone whenever motion is detected. The Inter-
net-connected camera allows you to monitor your home or any other area
with ease. Wherever you are, via your iPhone or Android smartphone, you can
remotely view video, take a live photo or begin video recording.
TECHNICAL
SUPPORT
GUARANTEE
MOVEMENT
DETECTION
NIGHT
VISION
EN
IP 65
HD
FULL
1080P
Free app
‘Easymate Cam’
available on
EN 2
1080P WIFI IP CAMERA
CONTENTS
A - SAFETY INSTRUCTIONS 05
1 - OPERATING PRECAUTIONS 05
2 - MAINTENANCE AND CLEANING 05
3 - RECYCLING 05
B - PRODUCT DESCRIPTION 06
1 - KIT CONTENTS 06
2 - CAMERA 06
3 - MAINS ADAPTOR 07
C - INSTALLATION 08
1 - INSTALLING THE CAMERA 08
2 - INSERTING A MICRO SD CARD (NOT INCLUDED) 08
3 - CONNECTING THE CAMERA 09
D - CONFIGURATION 10
1 - CONFIGURING THE CAMERA AND ADDING IT TO THE APP 10
2 - ACCESS TO ALL SETTINGS 12
2.1 - CONFIGURATION 12
E - OPERATION 14
1 - LIVE VIDEO 14
2 - VIEWING VIDEOS RECORDED BY THE CAMERA 14
3ENEN
1080P WIFI IP CAMERA
3EN
F - RESETTING 16
G - FAQ 17
H - TECHNICAL AND LEGAL INFORMATION 18
1 - TECHNICAL CHARACTERISTICS 18
2 - WARRANTY 19
3 - HELP AND ADVICE 19
4 - PRODUCT RETURNS/AFTER SALES SERVICE 19
5 - EC DECLARATION OF CONFORMITY 19
5ENEN
1080P WIFI IP CAMERA
A - SAFETY INSTRUCTIONS
1 - OPERATING PRECAUTIONS
• The cameras must not be installed where the
lens filter may be vulnerable to scratching and
dirt.
• Do not expose the lens to direct sunlight or any
reflected light source.
• Do not daisy-chain extension cords and/or
multi-socket adapters.
• Do not install near acidic chemicals, ammonia
or sources of toxic gases.
• The installation and use of the camera must
comply with local legislation
2 - MAINTENANCE AND CLEANING
• Always unplug the product from the mains
before carrying out any maintenance.
• Never use abrasive or corrosive substances to
clean the products.
• Use a soft, slightly damp cloth.
• Never use an aerosol to spray the product as
this may damage the internal workings.
3 - RECYCLING
This logo denotes that devices no longer
in use should not be disposed of as
household waste. as they are likely to
contain hazardous substances which are
dangerous to both health and the
environment. Return the equipment to
your local distributor or use the recycling collection
service provided by your local council.
Pour en savoir plus :
www.quefairedemesdechets.fr
EN 6
1080P WIFI IP CAMERA
EN
B - PRODUCT DESCRIPTION
1 - CONTENTS OF THE KIT
2 - CAMERA
5x 3
4x 3
3x 1
2x 1
1Camera
2230V A/C 50 Hz mains adaptor /
12V DC/1A
3Antenna to be screwed to rear of camera
4Wall plugs for wall-mounting
5Screws for wall-mounting
6Reset tool
1x 1
1
4
5
6
78
6x 1
2
3
7ENEN
1080P WIFI IP CAMERA
B - PRODUCT DESCRIPTION
1Slot cover for microSD card (not included) of up to 128GB, RESET button and USB socket (not
used)
2Loudspeaker grid
3Location of the microphone (on the front)
4Adjustable stand
5Mains adaptor power supply (included)
6Camera lens
7Infra-red light for night vision
8Dusk sensor for infra-red lighting control
3 - MAINS ADAPTER
A 230Vac 50Hz / 12Vdc 1A mains adapter is supplied in the kit for the camera power supply. Do not use other
power supplies as they could damage the camera and void the warranty.
EN 8
1080P WIFI IP CAMERA
EN
C - INSTALLATION
1 - INSTALLING THE CAMERA
• The camera can be attached to either wall or ceiling.
• Mount the camera using suitable screws and wall plugs for the type of surface (the screws and plugs
supplied are suitable for solid walls).
• Make sure the camera is properly secured to prevent it from falling.
Wall mounting Ceiling mounting
2 - INSERTING A MICRO SD CARD (NOT INCLUDED)
Your camera has a micro SD card slot, which gives it an internal storage memory. The maximum size is 128
GB.
This card is optional, but required if you wish the camera to record independently.
• Please insert the microSD card
9ENEN
1080P WIFI IP CAMERA
C - INSTALLATION
Note: These operations must be carried out with the camera disconnected from the mains power supply.
3 - CONNECTING THE CAMERA
EN 10
1080P WIFI IP CAMERA
EN
D - CONFIGURATION
1 - CONFIGURING THE CAMERA AND
ADDING IT TO THE APP
Comment: the screenshots shown are from the
Android version of the Easymate Cam app. The
iPhone version works in exactly the same way.
Download the Easymate Cam app on the Appstore
or Google Play, then open the app. Accept the
authorisation requests sent by the app if necessary
(access to the camera for scanning the QRCode,
etc.).
Next, click on the icon , the app opens the
camera on your smartphone and invites you to scan
the QRCode shown on the camera:
At this point, the camera must be powered on and
started up. It plays a standby tune when it is ready.
Click on “Ready music played” to continue.
The app then asks you how you wish to configure
the camera:
AP connection: via WiFi connection.
Audio configuration: the data will be transmitted by
the smartphone loudspeaker.
Select one of the methods to continue (they are
equivalent):
If you chose the AP Connection:
First, open your WiFi settings and connect to the
network that has a name that starts with ‘IOT’, using
the password indicated in the app. This temporary
connection will enable the camera to communicate
with your WiFi network.
Inhaltsverzeichnis
Andere Easymate Sicherheitskamera Handbücher
