EASYPRINT Compact CM Bedienungsanleitung
Compact CM
Compact IM
Easyprint
Product Manual
(2) EPT033612 Issue 2 March 2018
THIS PAGE INTENTIONALLY LEFT BLANK
EPT033612 Issue 2 March 2018 (3)
COMPACT
THERMAL TRANSFER PRINTER
PRODUCT MANUAL
This manual, Easyprint Part No. EPT033612, is for use in the operation and
maintenance of the Easyprint Compact CM and Compact IM Thermal
Transfer Printers.
Continuous Mode (CM).
The Compact CM is used when printing on a substrate which moves
continuously.
Intermittent Mode (IM).
The Compact IM is used when printing on a stationary substrate which only
moves between printing.
Users of these printers are warned that it is essential to read, understand
and act according to the information given in Part 1: Health and Safety.
All rights reserved. No part of this publication may be reproduced, stored
on a retrieval system, or transmitted in any form, or by any means,
electronic, mechanical, photocopying, recording or otherwise, without the
prior permission of Easyprint A/S
Easyprint A/S has a policy of continuous product improvement, the
Company therefore reserves the right to modify the specification contained
in this manual without notice.
Any trademarks referred to in this document are the property of their
respective trademark holders.
©Easyprint A/S 2018.
For sales, service and inks please contact:
Easyprint A/S
www.easy-print.com
sales@easyprint.com
(4) EPT033612 Issue 2 March 2018
End User License Agreement
You have acquired a device (“DEVICE”) that includes software licensed by Easyprint A/S
from Microsoft Licensing Inc. or its affiliates (“MS”). Those installed software products of MS
origin, as well as associated media, printed materials, and “online” or electronic
documentation (“SOFTWARE”) are protected by international intellectual property laws and
treaties. The SOFTWARE is licensed, not sold. All rights reserved.
IF YOU DO NOT AGREE TO THIS END USER LICENSE AGREEMENT (“EULA”), DO NOT
USE THE DEVICE OR COPY THE SOFTWARE. INSTEAD, PROMPTLY CONTACT Easyprint
A/S FOR INSTRUCTIONS ON RETURN OF THE UNUSED DEVICE(S) FOR A REFUND. ANY
USE OF THE SOFTWARE, INCLUDING BUT NOT LIMITED TO USE ON THE DEVICE,
WILL CONSTITUTE YOUR AGREEMENT TO THIS EULA (OR RATIFICATION OF ANY
PREVIOUS CONSENT).
GRANT OF SOFTWARE LICENSE. This EULA grants you the following license:
• You may use the SOFTWARE only on the DEVICE.
•NOT FAULT TOLERANT. THE SOFTWARE IS NOT FAULT TOLERANT. Easyprint A/S
HAS INDEPENDENTLY DETERMINED HOW TO USE THE SOFTWARE IN THE
DEVICE, AND MS HAS RELIED UPON Easyprint A/S TO CONDUCT SUFFICIENT
TESTING TO DETERMINE THAT THE SOFTWARE IS SUITABLE FOR SUCH USE.
• NO WARRANTIES FOR THE SOFTWARE. THE SOFTWARE is provided “AS IS” and
with all faults. THE ENTIRE RISK AS TO SATISFACTORY QUALITY,
PERFORMANCE, ACCURACY, AND EFFORT (INCLUDING LACK OF
NEGLIGENCE) IS WITH YOU. ALSO, THERE IS NO WARRANTY AGAINST
INTERFERENCE WITH YOUR ENJOYMENT OF THE SOFTWARE OR AGAINST
INFRINGEMENT. IF YOU HAVE RECEIVED ANY WARRANTIES REGARDING THE
DEVICE OR THE SOFTWARE, THOSE WARRANTIES DO NOT ORIGINATE FROM,
AND ARE NOT BINDING ON, MS.
•Note on Java Support. The SOFTWARE may contain support for programs written in
Java. Java technology is not fault tolerant and is not designed, manufactured, or
intended for use or resale as online control equipment in hazardous environments
requiring fail-safe performance, such as in the operation of nuclear facilities, aircraft
navigation or communication systems, air traffic control, direct life support machines,
or weapons systems, in which the failure of Java technology could lead directly to
death, personal injury, or severe physical or environmental damage. Sun
Microsystems, Inc. has contractually obligated MS to make this disclaimer.
• No Liability for Certain Damages. EXCEPT AS PROHIBITED BY LAW, MS SHALL
HAVE NO LIABILITY FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL OR
INCIDENTAL DAMAGES ARISING FROM OR IN CONNECTION WITH THE USE OR
PERFORMANCE OF THE SOFTWARE. THIS LIMITATION SHALL APPLY EVEN IF
ANY REMEDY FAILS OF ITS ESSENTIAL PURPOSE. IN NO EVENT SHALL MS BE
LIABLE FOR ANY AMOUNT IN EXCESS OF U.S. TWO HUNDRED FIFTY DOLLARS
(U.S.$250.00).
•Limitations on Reverse Engineering, Decompilation, and Disassembly. You ma y
not reverse engineer, decompile, or disassemble the SOFTWARE, except and only to
the extent that such activity is expressly permitted by applicable law notwithstanding
this limitation.
•SOFTWARE TRANSFER ALLOWED BUT WITH RESTRICTIONS. You may
permanently transfer rights under this EULA only as part of a permanent sale or
transfer of the Device, and only if the recipient agrees to this EULA. If the SOFTWARE
is an upgrade, any transfer must also include all prior versions of the SOFTWARE.
EPT033612 Issue 2 March 2018 (5)
•EXPORT RESTRICTIONS. You acknowledge that SOFTWARE is of US-origin. You
agree to comply with all applicable international and national laws that apply to the
SOFTWARE, including the U.S. Export Administration Regulations, as well as end-
user, end-use and country destination restrictions issued by U.S. and other
governments. For additional information on exporting the SOFTWARE, see
http://www.microsoft.com/exporting/.
(6) EPT033612 Issue 2 March 2018
FCC NOTICE
This equipment has been tested and found to comply with the limits for
Class A digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This
equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own
expense.
Any changes or modifications not expressly approved by the manufacturer
could void the user’s authority to operate the equipment.
European EMC Statement
This product may cause interference if used in residential areas. Such use
must be avoided, unless the user takes special measures to reduce
electromagnetic emissions, to prevent interference to the reception of radio
and television broadcasts.
(8) EPT033612 Issue 2 March 2018
AMENDMENT RECORD
Amendment Date
All Parts at Issue 1 March 2018
EPT033612 Issue 2 March 2018 1-1
PART 1 : Health and Safety
CONTENTS
Page
GENERAL SAFETY................................................................................ 1-3
HAZARD INFORMATION....................................................................... 1-5
Warning Notices............................................................................... 1-5
Lethal Voltages........................................................................... 1-5
Replacing the Ribbon................................................................. 1-5
Heating Element ......................................................................... 1-6
Organic Solvents ........................................................................ 1-6
Battery Replacement.................................................................. 1-6
Fuses Fire Hazard ...................................................................... 1-6
Caution Notices ............................................................................... 1-7
Damage to Print Head................................................................ 1-7
Loss of Counter Data ................................................................. 1-7
Cable Routing............................................................................. 1-7
Mains Supply Voltage................................................................. 1-7
Cleaning Materials for Print Head .............................................. 1-7
Spare Parts and Consumables .................................................. 1-8
Health and Safety
1-2 EPT033612 Issue 2 March 2018
THIS PAGE INTENTIONALLY LEFT BLANK
Andere Handbücher für Compact CM
1
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere EASYPRINT Drucker Handbücher
