Eaton 9130 Series Kurzanleitung

Eaton 9130 Series

DSP firmware upgrade instructions

10 28 349 Revision P4

2012-04-27

9130 firmware upgrade guide 1028349 Rev. P4

2012, Eaton Corporation Page 2 of 11

Introduction

This document gives a guidance of how to upgrade (flash) the Main

(DSP) of Powerware 9130 series UPS. Available firmware updates and

required software tools can be downloaded from

http://www.powerware.com/software/downloads.asp.

Purpose

Periodically, Eaton releases firmware upgrades for some of its products.

With each new release, new features become available and often, some

issues are improved. Please reference the document Tracking of Modify

table V1.28.doc in the firmware upgrade package if you are interested in

knowing what enhancements and changes have been made between

each released version of firmware.

9130 firmware upgrade guide 1028349 Rev. P4

2012, Eaton Corporation Page 3 of 11

Quick reference

1. Shutdown the devices supported by the UPS.

2. Ensure the UPS is in Standby state (output off).

3. Set communication speed of RS-232 port (and USB) in the UPS to

9600bps: Settings



User Settings



Serial Port Configuration



Port: RS232, Speed: 9600.

4. Connect RS-232 cable between the computer and the UPS.

5. Start Watcher - UpsFlash software.

6. Select COM port and Bit Rate 9600bps and press “Open”

7. Press “Open File”, and select an “S” file to be flashed (e.g. V1.22.S).

8. Press “Flash Normal” and unplug input power cord from the UPS.

9. Wait until “Flash ok” notice will appear and press “Close” button.

Main (DSP) firmware upgrade via RS-232

9130 firmware upgrade guide 1028349 Rev. P4

2012, Eaton Corporation Page 4 of 11

1 Main (DSP) firmware upgrading

1.1 Requirements

In order to upgrade the main (DSP) firmware of the UPS, you will need:

a computer with Microsoft Windows operating system (Windows

2000 or newer)

an RS-232 or USB cable (both are included in the package with the

UPS)

Watcher – UpsFlash software package (can be downloaded from

http://www.powerware.com/software/downloads.asp)

The software package (.zip file) includes the files:

Watcher – UpsFlash Vx.x.exe, the DSP firmware upgrade tool

UPSDeviceList.ini

Vx.xx.S, the firmware upgrade (e.g. V1.22.S)

Tracking of Modify table Vx.xx.doc, list of changes (optional)

1028349 rev. X…, this guide.

Unpack or Extract the package to a temporary directory.

1.2 DSP Firmware Upgrading via RS-232 – Flash Normal

Follow the procedure below while upgrading the DSP firmware of the

UPS via RS-232 cable.

1. If the UPS is feeding any load (computer or other equipment), turn

off the load(s) supported by the UPS. Then command the UPS to

standby state by pushing button for at least three seconds.

In case the UPS is off completely, provide AC supply by plugging the

input power cord to the unit when it should automatically enter to

standby state.

State of the UPS can be verified from the front panel’s UPS Status

menu:

2. Set communication speed of the RS-232 port (and USB) in the UPS

to 9600 bps using the LCD front panel: Go to Settings



User

Settings



Serial Port Configuration



Port: RS232, Speed: 9600.

3. Connect the RS-232 cable between DB-9 connectors of the

computer and the UPS.

4. Start Watcher - UpsFlash software from the computer.

9130 firmware upgrade guide 1028349 Rev. P4

2012, Eaton Corporation Page 5 of 11

5. Choose the right COM port (typically COM1) and Bit rate “9600”,

then press to open COM port. Choose “Ups Flash” Tab.

6. Press and select “S” file to be flashed and click .

9130 firmware upgrade guide 1028349 Rev. P4

2012, Eaton Corporation Page 6 of 11

7. Press button when the following Popup Message Box

should appear:

Note. If the message below will appear instead, return to item 1 in this

procedure to verify the cabling, COM port settings and that the UPS is in

standby state.

8. Unplug the input power cord from the UPS and click . The

flashing will begin after a few seconds.

Note. If “Flash firmware NG!” message will appear during the flashing, go

to Chapter 1.3 DSP Firmware Upgrading via RS-232 – Flash Error.

9130 firmware upgrade guide 1028349 Rev. P4

2012, Eaton Corporation Page 7 of 11

9. The LCD display “Flashing in progress…”. Wait until the “Flash OK”

message will appear. Click and buttons and exit

from the software.

9130 firmware upgrade guide 1028349 Rev. P4

2012, Eaton Corporation Page 8 of 11

1.3 DSP Firmware Upgrading via RS-232 – Flash Error

This procedure is used when the DSP firmware upgrading via RS-232

port has failed or interrupted with “Flash firmware NG!” message (buzzer

of the UPS may beep all the time).

1. Keep the input power cord disconnected from the UPS.

2. If Watcher - UpsFlash software is not running, start up the software

and choose the right COM port (typically COM1) and Bit rate “9600”,

then press to open COM port.

3. Press button and select “S” file to be flashed (e.g. V1.22.S)

and click .

4. Click button. The DSP flashing should begin after a few

seconds.

9130 firmware upgrade guide 1028349 Rev. P4

2012, Eaton Corporation Page 9 of 11

5. Wait until the “Flash OK” message will appear. Click and

buttons and exit from the software.

9130 firmware upgrade guide 1028349 Rev. P4

2012, Eaton Corporation Page 10 of 11

Inhaltsverzeichnis

Andere Eaton UPS Handbücher

Eaton

Eaton Powerware 9155 Bedienungsanleitung

Eaton

Eaton EX 2200 RT 2U Bedienungsanleitung

Eaton

Eaton 5E700UD-KR Montageanleitung

Eaton

Eaton Powerware 9125 Bedienungsanleitung

Eaton

Eaton Evolution 650/650 Rack 1UEvolution 850 Bedienungsanleitung

Eaton

Eaton RT 1250VA Bedienungsanleitung

Eaton

Eaton PW9340-80I-N Betriebsanleitung

Eaton

Eaton 9PX EBM 240V Bedienungsanleitung

Eaton

Eaton 93E Bedienungsanleitung

Eaton

Eaton Powerware 9155 Bedienungsanleitung

Eaton

Eaton Powerware 9170+ UPS 3-18 kVA Bedienungsanleitung

Eaton

Eaton 5P750RC Bedienungsanleitung

Eaton

Eaton 5SC 1000i Rack2U Bedienungsanleitung

Eaton

Eaton Protection Station 650 Bedienungsanleitung

Eaton

Eaton Eaton 5PX Montageanleitung

Eaton

Eaton 91PS Handbuch

Eaton

Eaton 9E 10000i Bedienungsanleitung

Eaton

Eaton 9395 UPS 10001100 kVA Bedienungsanleitung

Eaton

Eaton 93PM IBC-L Handbuch

Eaton

Eaton Power Xpert 9395P Handbuch

Eaton

Eaton Ellipse ECO 500 Bedienungsanleitung

Eaton

Eaton multimatic HotSwap MBP3KI Bedienungsanleitung

Eaton

Eaton 93PM IBC-L Bedienungsanleitung

Eaton

Eaton Ellipse PRO 1600 FR Bedienungsanleitung

Beliebte UPS Handbücher anderer Marken

Pylontech

Pylontech Victron & Pylontech US5000 Bedienungsanleitung

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Bedienungsanleitung

Mecer

Mecer ME-1000-WTU Bedienungsanleitung

Mustek

Mustek PowerMust 530(B) Plus Installations- und Betriebshandbuch

Emerson

Emerson Liebert NXL series Bedienungsanleitung

MAKELSAN

MAKELSAN BOXER SERIES Bedienungsanleitung

Block

Block PC-0524-400-0 Bedienungsanleitung

CyberPower

CyberPower CP585LCD Bedienungsanleitung

CyberPower

CyberPower Office Tower Series UPS 1000 Bedienungsanleitung

CyberPower

CyberPower BM100 Bedienungsanleitung

Best Power

Best Power 610 Bedienungsanleitung

Best Power

Best Power Unity/I UT3K Bedienungsanleitung

Mustek

Mustek PowerMust 400 Offline Bedienungsanleitung

Xantrex

Xantrex Trace 512 UR-UPS Bedienungsanleitung

Forza

Forza SL-1501UL Bedienungsanleitung

LEGRAND

LEGRAND keor 310081 Bedienungsanleitung

ABB

ABB Conceptpower DPA 500 Bedienungsanleitung

ZincFive

ZincFive BC Series Bedienungsanleitung