Eaton Powerware 5115 Bedienungsanleitung

Powerware 5115 (9910-P13 and P14)

Communication Options

for IBM Applications

Special Symbols

The following are examples of symbols used on the UPS or accessories to alert you to important

information:

This symbol indicates that you should not discard waste electrical or electronic equipment (WEEE) in

the trash. For proper disposal, contact your local recycling/reuse or hazardous waste center.

IBM, AS/400, pSeries, xSeries, and RS/6000 are registered trademarks and iSeries and OpenPower are trademarks

of International Business Machines Corp. Powerware is a registered trademark and ConnectUPS is a trademark of

Eaton Power Quality Corporation.

reproduced in any way without the express written approval of Eaton Corporation.

EATON Powerware®5115 (9910-P13 and P14) Communication Options for IBM®Applications S164201599 Rev A 3

P13 and P14 Communication Options

If you want the UPS to communicate with your computer, use Table 1 to

determine which communication option is correct for your application.

Table 1. Communication Options

Application Software Suite CD

and Serial Cable

AS/400®Interface

Cable

IBM i5/iSeriestServer — X

IBM p5/pSeries®, OpenPowert,or

xSeries®Server with Single Serial (TTY)

Connection

X —

IBM p5/pSeries, OpenPower, or xSeries

Server and/or Network (WebServer)

Connection (UPS as a node)

X —

IBM p5/pSeries, OpenPower, or xSeries

Server with Logical Partitions (LPARs) Not Supported

Follow the installation instructions with the Software Suite CD. This

document shows the communication option overviews. For additional

information and a current listing of supported operating systems, go to

www.powerware.com.

P13 AND P14 COMMUNICATION OPTIONS

EATON Powerware®5115 (9910-P13 and P14) Communication Options for IBM®Applications S164201599 Rev A

i5 Interface Overview

To connect the UPS to an i5 you need:

SA Powerware-supplied AS/400 interface cable (labeled 05146792),

included with the UPS

SAn IBM-supplied UPS interface cable (labeled 1827), included with

the server

Connect the cables as shown in Figure 1.

AS/400 Interface Cable

(labeled 05146792)

UPS Interface Cable

(labeled 1827)

UPS

Communication Port

“P1-T1” UPS Port

End of Cable Labeled “AS/400”

End of Cable Labeled “UPS”

IBM i5 Server

Figure 1. i5 Interface

P13 AND P14 COMMUNICATION OPTIONS

EATON Powerware®5115 (9910-P13 and P14) Communication Options for IBM®Applications S164201599 Rev A 5

iSeries or AS/400 Interface Overview

To connect the UPS to an iSeries or AS/400 you need:

SA Powerware-supplied AS/400 interface cable (labeled 05146792),

included with the UPS

Connect the cable as shown in Figure 2.

“J14” UPS Port

(location may

vary by model)

UPS

AS/400 Interface Cable

(labeled 05146792)

IBM iSeries Server

Figure 2. iSeries or AS/400 Interface

P13 AND P14 COMMUNICATION OPTIONS

EATON Powerware®5115 (9910-P13 and P14) Communication Options for IBM®Applications S164201599 Rev A

UPS Monitoring on the i5, iSeries, and AS/400

1. Set the QUPSDLYTIM system value for the UPS monitoring

feature.

2. UPS monitoring is a standard feature of the iSeries (AS/400)

operating system. QUPSDLYTIM is a timer that tells the system

how long to run on UPS power before shutting down. Each system

is initially assigned a default value for QUPSDLYTIM. A complete

description of QUPSDLYTIM is provided on the AS/400 Information

Center Internet Site at:

http://publib.boulder.ibm.com/pubs/html/as400/ic2924/info/index.htm

Select System Administration and Maintenance.

CAUTION

The *NOMAX value tells the AS/400 to use customized shutdown software, and if none is

available it will begin shutdown immediately when utility power fails. Do not set

QUPSDLYTIM to “*NOMAX” unless you understand the implications of the “*NOMAX”

function as described at the AS/400 Information Center Internet Site.

P13 AND P14 COMMUNICATION OPTIONS

EATON Powerware®5115 (9910-P13 and P14) Communication Options for IBM®Applications S164201599 Rev A 7

Serial (TTY) Interface Overview

To serially (TTY) connect the UPS to a p5, pSeries, RS/6000®,

OpenPower, or other system you need:

SA Powerware-supplied serial interface cable (labeled 60420064-002 or

124102022), included with the UPS

SPowerware LanSafe Power Management Software from the

Software Suite CD, included with the UPS

For p5 installations you also need:

SAn IBM-supplied 2-port Asynchronous EIA adapter (FC 5723) installed

on a p5 server (the pSeries does not require an EIA adapter)

SAn IBM-supplied maintenance package 5200-05 for AIX 5.2L V5.2

(APAR IY66260); or the maintenance package 5300-01 for AIX 5.3L

V5.3 (APAR IY62267)

Follow the software installation instructions contained on the Software

Suite CD to install the Powerware LanSafe software. Connect the serial

cable as shown in Figure 3.

2-Port Asynchronous

EIA Adapter

(FC 5723)

Serial Interface Cable

(labeled 60420064-002

or 124102022)

IBM p5 Server

UPS

Communication Port

Figure 3. Serial (TTY) Interface

p5 or pSeries with Logical Partitions Interface

The UPS does not support LPARs. LPARs are supported on UPS models

9910-P22, P23, P30, P33, P64, and P65 with the ConnectUPS -X

Web/SNMP Card (FC 2934).

*164201599A*

164201599 A

Andere Handbücher für Powerware 5115

Inhaltsverzeichnis

Andere Eaton UPS Handbücher

Eaton

Eaton 9EEBM240 Bedienungsanleitung

Eaton

Eaton Power Xpert 9395C Bedienungsanleitung

Eaton

Eaton Powerware 9140 Bedienungsanleitung

Eaton

Eaton 93E 30ITC Bedienungsanleitung

Eaton

Eaton MX 4000 RT Bedienungsanleitung

Eaton

Eaton Tripp Lite SmartPro Series Montageanleitung

Eaton

Eaton 93PM IBC-L Bedienungsanleitung

Eaton

Eaton 93PM IBC-L Handbuch

Eaton

Eaton 9EHD-33-40/20 Betriebsanleitung

Eaton

Eaton DX 10000LXL Bedienungsanleitung

Eaton

Eaton 9PX2000RT-L Montageanleitung

Eaton

Eaton 9PX1000IRTANZ-L Bedienungsanleitung

Eaton

Eaton E Series DX Bedienungsanleitung

Eaton

Eaton 5S 1000 Bedienungsanleitung

Eaton

Eaton 550VA 3S Bedienungsanleitung

Eaton

Eaton EX 2200 RT 2U Bedienungsanleitung

Eaton

Eaton Power Xpert 9395 UPS Plus 1 Bedienungsanleitung

Eaton

Eaton 5E Montageanleitung

Eaton

Eaton 5E650iUSB-AU Bedienungsanleitung

Eaton

Eaton 9395 UPS and Plus 1 UPS 650825 kVA Bedienungsanleitung

Eaton

Eaton 5PX 1500i RT2U Bedienungsanleitung

Eaton

Eaton Power Xpert 9395 550 Bedienungsanleitung

Eaton

Eaton 93PR Series Handbuch

Eaton

Eaton 9PX5KP1 Montage- und Bedienungsanleitung

Beliebte UPS Handbücher anderer Marken

Pylontech

Pylontech Victron & Pylontech US5000 Bedienungsanleitung

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Bedienungsanleitung

Mecer

Mecer ME-1000-WTU Bedienungsanleitung

Mustek

Mustek PowerMust 530(B) Plus Installations- und Betriebshandbuch

Emerson

Emerson Liebert NXL series Bedienungsanleitung

MAKELSAN

MAKELSAN BOXER SERIES Bedienungsanleitung

Block

Block PC-0524-400-0 Bedienungsanleitung

CyberPower

CyberPower CP585LCD Bedienungsanleitung

CyberPower

CyberPower Office Tower Series UPS 1000 Bedienungsanleitung

CyberPower

CyberPower BM100 Bedienungsanleitung

Best Power

Best Power 610 Bedienungsanleitung

Best Power

Best Power Unity/I UT3K Bedienungsanleitung

Mustek

Mustek PowerMust 400 Offline Bedienungsanleitung

Xantrex

Xantrex Trace 512 UR-UPS Bedienungsanleitung

Forza

Forza SL-1501UL Bedienungsanleitung

LEGRAND

LEGRAND keor 310081 Bedienungsanleitung

ABB

ABB Conceptpower DPA 500 Bedienungsanleitung

ZincFive

ZincFive BC Series Bedienungsanleitung