Eaton 93PM IBC-L Konfigurationshandbuch

Eaton 93PM UPS (400kW Frame) Seismic Mounting Bracket Install Instructions P-1 4000774—Rev 01 1

SSeeiissmmiicc BBrraacckkeett IInnssttaallll IInnssttrruuccttiioonnss

EEaattoonn 9933PPMM UUPPSS ((440000kkWW FFrraammee)) SSeeiissmmiicc MMoouunnttiinngg BBrraacckkeett IInnssttaallllaattiioonn IInnssttrruuccttiioonnss

Use these instructions to install front and rear seismic mounting brackets to secure the Uninterruptible Power

Supply (UPS) to the facility floor.

NOTE Refer to the applicable installation and operation manual supplied with UPS for

dimensions and required clearances.

Seismic Mounting Bracket Kit Contents

Front Mounting Bracket 2

Rear Mounting Bracket 2

Hex Bolts 1

To install the brackets:

. Unload and mechanically install the UPS according to the instructions in the applicable installation and

operation manual.

2. Drill holes in the floor for the mounting brackets. Size the holes for the type of customer-supplied hardware

being used to secure the brackets to the floor. See Figure for the bracket mounting hole locations.

3. Remove the front seismic mounting brackets from the kit and secure to the UPS cabinet base using the

bolts supplied with the kit. See Figure 2 for mounting bracket installation location.

4. Remove the rear seismic mounting brackets from the kit and secure to the UPS cabinet base using the

bolts supplied with the kit. See Figure 3 for mounting bracket installation location.

5. Secure the cabinet to the floor with customer-supplied hardware.

FFoorr MMoorree IInnffoorrmmaattiioonn

Refer to the Eaton 93PM UPS (400 kW Frame) Installation and Operation Manual for the following additional

information:

• Installation instructions, including site preparation, planning for installation, wiring and safety information,

and detailed illustrations of cabinets with dimensional and connection point drawings

Visit www.eaton.com/powerquality or contact an Eaton service representative for information on how to obtain

copies of these manuals.

2 Eaton 93PM UPS (400kW Frame) Seismic Mounting Bracket Install Instructions P-1 4000774—Rev 01

RReeffeerreennccee IImmaaggeess

Figure 1. Seismic Mounting Bracket Mounting Hole Locations

Eaton 93PM UPS (400kW Frame) Seismic Mounting Bracket Installation Instructions

Eaton 93PM UPS (400kW Frame) Seismic Mounting Bracket Install Instructions P-1 4000774—Rev 01 3

Figure 2. Front Seismic Mounting Bracket Installation

SeismicMounting

Front Seismic

Brackets (2)

Floor Mounting

Holes(4places per bracket) BracketBolts

(4 places per bracket)

Figure 3. Rear Seismic Mounting Bracket Installation

Rear Seismic

Brackets (2)

Rear Mounting

Holes (4 please per

bracket)

Bracket Bolts

(4 places per

bracket)

Eaton 93PM UPS (400kW Frame) Seismic Mounting Bracket Installation Instructions

4 Eaton 93PM UPS (400kW Frame) Seismic Mounting Bracket Install Instructions P-1 4000774—Rev 01

eettttiinngg HHeellpp

If help is needed with any of these instructions, please call the Customer Reliability Center at:

United States: 1-800-843-9433

Canada: 1-800-461-9166 ext 60

All other countries: Call your local service representative

Please use the following e-mail address for comments, suggestions, or to report an error in these instructions:

E-ESS [email protected]

Eaton is a registered trademark of Eaton or its subsidiaries and affiliates. All other trademarks are property of

their respective companies.

any way without the express written approval of Eaton.

Eaton 93PM UPS (400kW Frame) Seismic Mounting Bracket Installation Instructions

Andere Handbücher für 93PM IBC-L

Inhaltsverzeichnis

Andere Eaton UPS Handbücher

Eaton

Eaton Powerware 9395 Bedienungsanleitung

Eaton

Eaton Ellipse ASR 450 Bedienungsanleitung

Eaton

Eaton 9130 UPS Bedienungsanleitung

Eaton

Eaton Powerware 9155 Bedienungsanleitung

Eaton

Eaton Power Xpert Programmierhandbuch

Eaton

Eaton 3S850 Montageanleitung

Eaton

Eaton 93PM-L IAC-B Bedienungsanleitung

Eaton

Eaton DX-EMC34 Series Handbuch

Eaton

Eaton Evolution S 2500 RT 2U Bedienungsanleitung

Eaton

Eaton Ellipse ECO 500 Bedienungsanleitung

Eaton

Eaton 9PX Montageanleitung

Eaton

Eaton Powerware 9390 Bedienungsanleitung

Eaton

Eaton Powerware 9355 Parallel Bedienungsanleitung

Eaton

Eaton 40 kVA Handbuch

Eaton

Eaton Powerware 9155 Bedienungsanleitung

Eaton

Eaton 93E 30ITC Bedienungsanleitung

Eaton

Eaton 93PM UPS Bedienungsanleitung

Eaton

Eaton 3SMini Montageanleitung

Eaton

Eaton Ellipse ECO 500 Bedienungsanleitung

Eaton

Eaton 9E Bedienungsanleitung

Eaton

Eaton Powerware 9355 Bedienungsanleitung

Eaton

Eaton 9PX1000IRT2U-L Montageanleitung

Eaton

Eaton 5PX 1500i RT2U Bedienungsanleitung

Eaton

Eaton Ellipse ECO 500 Bedienungsanleitung

Beliebte UPS Handbücher anderer Marken

Pylontech

Pylontech Victron & Pylontech US5000 Bedienungsanleitung

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Bedienungsanleitung

Mecer

Mecer ME-1000-WTU Bedienungsanleitung

Mustek

Mustek PowerMust 530(B) Plus Installations- und Betriebshandbuch

Emerson

Emerson Liebert NXL series Bedienungsanleitung

MAKELSAN

MAKELSAN BOXER SERIES Bedienungsanleitung

Block

Block PC-0524-400-0 Bedienungsanleitung

CyberPower

CyberPower CP585LCD Bedienungsanleitung

CyberPower

CyberPower Office Tower Series UPS 1000 Bedienungsanleitung

CyberPower

CyberPower BM100 Bedienungsanleitung

Best Power

Best Power 610 Bedienungsanleitung

Best Power

Best Power Unity/I UT3K Bedienungsanleitung

Mustek

Mustek PowerMust 400 Offline Bedienungsanleitung

Xantrex

Xantrex Trace 512 UR-UPS Bedienungsanleitung

Forza

Forza SL-1501UL Bedienungsanleitung

LEGRAND

LEGRAND keor 310081 Bedienungsanleitung

ABB

ABB Conceptpower DPA 500 Bedienungsanleitung

ZincFive

ZincFive BC Series Bedienungsanleitung