Ebode IPV38 Bedienungsanleitung
www.ebodeelectronics.eu
Pan & Tilt IP Camera
IPV38 & IPV38WE
User guide 2
Bedienungsanleitung -
Gebruikershandleiding -
Användarmanual -
Guide utilisateur 42
Guía del usuario -
Manual do utilizador -
Manuale per l’utente -
Before using our product, please read this document carefully.
Jul 2013 IPV38 / IPV38WE
2
Index
1.0 Introduction
1.1 Features
1.2 Packing List
1.3 Product Views
1.3.1 Front View
1.3.2 Rear Panel
1.3.3 Bottom View
1.4 PC System Requirements
1.5 Hardware Installation
1.6 Software Installation
1.7 IP Camera Tool
1.7.1 Six Options Available
1.7.2 Basic Properties
1.7.3 Network Configuration
1.7.4 Firmware Upgrade
1.7.5 Refresh Camera List
1.7.6 Flush Arp Buffer
1.7.7 About IP Camera Tool
1.8 Camera Login
1.8.1 For IE Browser
1.8.2 For Safari, Firefox, Google Browser
1.8.3 For Mobile Phone
1.9 Network Settings
1.9.1 Basic Network Settings
1.9.2 Wireless LAN Settings
1.9.3 ADSL Settings
1.9.4 UPnP Settings
1.9.5 DDNS Service Settings
1.9.6 To change the camera’s port.
2.0 Set Port Forwarding in the router
2.1 Belgian Customers with Telenet Modem/Routers
3.0 System Settings
3.1 Device Info
3.2 Alias Settings
4.0 Sign in mobile phone
4.1 Compatible Apps for mobile devices
5.0 Obtaining Technical Support
Jul 2013 IPV38 / IPV38WE
3
1.0 Introduction
This is an integrated wireless IP Camera solution. It combines a high quality digital Video Camera with network
connectivity and a powerful web server to bring clear pictures to your Desktop from anywhere on your local network or
over the Internet.
The main function of the camera is to transmit remote video over IP network. The high quality video image can be
transmitted with 30fps speed on the LAN/WAN by using MJPEG hardware compression technology.
It is based on the TCP/IP standard, build-in WEB server which supports Internet Explorer. Therefore the management and
maintenance of your camera becomes simple by using the network to achieve the remote configuration, start-up and to
upgrade firmware.
You can use your IP Camera to monitor your home or your office. Also, controlling and managing images are simple by
visiting the web site.
1.1 Features
☆Powerful high-speed video protocol processor
☆High-sensitivity 1/4’’ CMOS sensor
☆Picture total 300K pixels
☆Supports Pan and Tilt (PT) control, Pan 270°, Tilt 120°
☆Optimized MJPEG video compression for transmission
☆Multi-level user management and passwords definition
☆Embedded Web Server for users to visit by IE
☆Supports wireless network (WI-FI/802.11/b/g)
☆Supports Dynamic IP (DDNS) and UPNP LAN and Internet (ADSL, Cable Modem)
☆Gives an alarm in case of motion detection
☆Supports image snapshot
☆Supports multiple protocols：HTTP/TCP/IP/UDP/SMTP/DDNS/SNTP/DHCP/FTP
☆Supports WEP/WPA/WPA2 encryption
☆Supports 3G phone, Smart phone control and surveillance
☆Supports IE, Firefox, Safari, and Google chrome browsers
1.2 Packing List
Please check that the following items are included:
● IP Camera - 6.0mm Lens (IPV38) or 3.6mm Lens (IPV38WE)
● Power Supply
● Wi-Fi Antenna
● Network Cable
● Mounting bracket
● Quick Setup Guide
● CD with software and manual
Jul 2013 IPV38 / IPV38WE
4
1.3 Product Views
1.3.1 Front View
Figure 1.1
1 Light Sensitive Hole: For light sensitive photocell
2 Infrared LED: 10 LEDs
3 LENS: CMOS sensor with fixed focus lens. (IPV38 has 6.0mm Lens, and the IPV38WE has 3.6mm Lens)
4 Network Indicator LED: If there is network activity, the LED will blink
5 Microphone: Build-in microphone
6 Speaker: Build-in speaker
7 Wireless Antenna: Wi-Fi Antenna
1.3.2 Rear Panel
Figure 1.2
Jul 2013 IPV38 / IPV38WE
5
LAN: RJ-45/10-100 base T
Power: DC 5V/2A power supply
Network Light: The green LED is on when connected to the network, the yellow LED blinks when data is transferred.
Audio Output: The jack is used to connect an external speaker
I/O PINS: 1: Output A 2: Output B 3: Alarm input 4: Input (GND)
1.3.3 Bottom View
Figure 1.3
Please note the unique MAC and DDNS addresses on the bottom of the camera (different for every camera).
RESET BUTTON: Press and hold the RESET BUTTON for 15 Seconds to reset the camera back to the factory default
settings. (Please keep the power on when doing a RESET)
1.4 PC System Requirements
System configuration requirements:
CPU: 2.06 GHZ or above.
Memory: 256M or above.
Network Card: 10M or above.
Display Card: 64M or above memory.
Recommended Operating system: Windows XP, Windows Vista, Windows 7.
Jul 2013 IPV38 / IPV38WE
6
1.5 Hardware Installation
You need to set up your camera using a network cable (wired) first, before you can use it wirelessly, so let’s start with
plugging in the network cable. Follow the steps below to set up your camera hardware.
1. Plug one end of the network cable into the camera, and the other end into an empty port of your
router/switch/modem.
2. Install the Wi-Fi antenna to the camera.
3. Plug the power adaptor into the camera and into an AC outlet. Please note that your power supply will fit both the AC
outlet and the Audio Output, please make sure you put it in the AC outlet, or your IP camera will not be powered.
4. It takes approximately 30 seconds to boot up the camera.
5. When the power is on and the network cable is connected, the green LED on the rear panel next to the network cable
will stay on, please make sure the Green light is on before we continue. The yellow LED will keep flashing, and the
Indicator LED on the front of the camera will flash when the connection is established. (The behavior of the front
indicator LED can be controlled by software).
Figure 1.4
1.6 Software Installation
1. IP Camera Tool: Insert the CD, a popup menu might appear like shown in the picture below.
2. Select “Open Map” and click “OK”
Jul 2013 IPV38 / IPV38WE
7
3. Open the “ebode IP Vision Software” folder and double click “IPCamSetup.exe” then click next to complete the software
installation. (Please note that on some computer systems it might take a few seconds before the “IPCamSetup” icon will
appear)
For Microsoft Windows users only:
In order to run smooth we will need to install the “ActiveX App” on each system we would like to use to visit the camera.
The “AppInstall” file is located in the same folder as the “IPCamSetup” file from the previous steps. Please take the
following steps:
Jul 2013 IPV38 / IPV38WE
8
4. ActiveX: Double click “Appinstall.exe”—“Next”—“Install”—“Finish”.
Figure 1.5
Figure 1.6
Jul 2013 IPV38 / IPV38WE
9
Figure 1.7
Figure 1.8
After the systems has been restarted, the icon “IP Camera Tool” will be displayed on your desktop.
Caution: Before installing and using the product, please read the following precautions carefully and make sure they are
fully understood.
Use only the power adaptor included with the product. Use of an unauthorized power adapter may cause damage to your
IP Camera and avoid warranty.
Jul 2013 IPV38 / IPV38WE
10
The IPV38 is designed as an Indoor Camera should be installed indoors only.
Do not touch the lens of the IP Camera. The optimum focus range has been set for you. If you turn the lens, it may cause
incorrect focus and blurry images.
Do not turn the Pan/Tilt by force, it may cause damage to internal components of the Pan/Tilt mechanism. Only when the
Pan / Tilt system is not working properly anymore you are allowed to carefully move the camera left or right until a loud
click is heard.
For firmware upgrading or connection with an external device, refer to detailed instructions contained in the CD.
Caution: On the first run of the program “IP Camera Tool” you might get a Windows Security Alert Popup. It will ask you
to choose a setting for the firewall. Please make sure you choose the ‘UNBLOCK’ option. Your IP camera will not work
without unblocking the firewall settings.
1.7 IP Camera Tool
When the Device has been installed properly, you can double-click the Icon “IP Camera Tool”
and a dialog box shown in Figure 1.9 will pop up.
Figure 1.9
Note: The software searches IP Servers automatically over your LAN. It may take a few minutes before the IP address
appears in the list. There are 3 cases:
Andere Handbücher für IPV38
4
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Sprachen:
Andere Ebode IP-Kamera Handbücher
Ebode
Ebode IPV68P2P Bedienungsanleitung
Ebode
Ebode IPV38 Bedienungsanleitung
Ebode
Ebode IPV38P2P Bedienungsanleitung
Ebode
Ebode IPV58P2P Bedienungsanleitung
Ebode
Ebode IPV38 Bedienungsanleitung
Ebode
Ebode IP Vision 38 Bedienungsanleitung
Ebode
Ebode IPV38 Bedienungsanleitung
Ebode
Ebode IPV58 Bedienungsanleitung
Ebode
Ebode IPV38 Bedienungsanleitung
Ebode
Ebode IPV68P2P Bedienungsanleitung
