Ebyte E18 Series Bedienungsanleitung

E18 series ZigBee wireless module

Firmware Update Operation Instructions

Chengdu Ebyte Electronic Technology Co,;Ltd

AN2022001

Step 1 Hardware preparation .................................................................................. 3

Step 2 Install tools and drivers .................................................................................. 3

Step 3 Connect debugger/programmer to target module/test kit ........................................................3

Step 4 Connect USB cable .................................................................................... 4

Step 5 Associate a USB device with a USB driver .................................................................. 4

Step 6 Check LED status ...................................................................................... 4

Step 7 Flash firmware .........................................................................................5

Revision history ............................................................................................. 6

Chengdu Ebyte Electronic Technology Co,;Ltd

AN2022001

Step 1 Hardware preparation

Prepare the following items：

Debugger/Programmer CC Debugger https://www.ebyte.com/en/product-view-news.html?id=947

Ebyte E18 seires module or E18 series test kits https://www.cdebyte.com/product_serch/E18-/1/

Step 2 Install tools and drivers

To obtain the USB drivers required by the tools, it is recommended to download and install the tools listed below:

SmartRF™ Flash Programmer https://www.ti.com/tool/FLASH-PROGRAMMER

After the tool is installed, the driver will be stored in the following default path:

C:\Program Files\Texas Instruments\SmartRF Tools\Drivers\cebal

Step 3 Connect debugger/programmer to target module/test kit

Connect debugger/programmer to target module/test kit，The minimum connections required for SOC debugging and

programming are shown in the below:

CC Debugger

connecting

E18 modules/test kit

GND

Target Voltage Sense

VCC

DC(Debug Clock)

P2.2

DD(Debug Data)

P2.1

RESETn

RESET

For the pin definitions of E18 series modules/test kits, please refer to the relevant product manuals.

Chengdu Ebyte Electronic Technology Co,;Ltd

AN2022001

Step 4 Connect USB cable

Connect the USB cable to the debugger and then to the PC.

Step 5 Associate a USB device with a USB driver

When the debugger/programmer is connected to the PC, the PC will detect the new USB device. Windows will automatically handle the

installation and association of the relevant drivers.

If Windows does not automatically recognize the device driver, please disconnect the target module/test kit and reconnect the USB cable to try.

Or install the driver manually, the driver path：

C:\Program Files\Texas Instruments\SmartRF Tools\Drivers\cebal

Step 6 Check LED status

The debugger/programmer is respectively connected to the target module/test kit and PC, and it supplies power to the target module/test kit.

Then check the status of the LEDs on the Debugger/programmer.

If the light is Green, the debugger/programmer has successfully detected the chip on the target.

If the light is Red, the debugger/programmer failed to detect the chip on the target.

Please ensure that all required wires are properly connected and the target board is powered. Or please press the reset button of the

debugger/programmer to retry the chip detection.

Chengdu Ebyte Electronic Technology Co,;Ltd

AN2022001

Step 7 Flash firmware

Opent SmartRF™ Flash Programmer：

○

1Select “Program CCxxxx SoC or MSP430”；

○

2 Displays the successfully recognized SoC chip, it can be considered that the connection is successful;

○

3Select the firmware file "*.Hex" file;

○

4It is recommended to select “Erase,program and verify”；

○

5 Click“Perform action”, start to flash the firmware and waiting for the progress bar is to complete.

○

Chengdu Ebyte Electronic Technology Co,;Ltd

AN2022001

Revision history

Version

Date

Description

Issued by

1.0

2022-9-1

Initial version

Ning

About us

Technical support: support@cdebyte.com

Documents and RF Setting download link: https://www.ru-ebyte.com

Thank you for using Ebyte products! Please contact us with any questions or suggestions: in[email protected]

------------------------------------------------------------------------------------------------------------

Fax: 028-61543675 ext. 821

Web: https://www.ru-ebyte.com

Address: Innovation Center D347, 4# XI-XIN Road,Chengdu, Sichuan, China

Andere Handbücher für E18 Series

Inhaltsverzeichnis

Andere Ebyte Drahtlosmodul Handbücher

Ebyte

Ebyte E22-900T22S Bedienungsanleitung

Ebyte

Ebyte E70-433T30S Bedienungsanleitung

Ebyte

Ebyte E610-433T30S Bedienungsanleitung

Ebyte

Ebyte ASR6601 Bedienungsanleitung

Ebyte

Ebyte E70-915T30S Bedienungsanleitung

Ebyte

Ebyte E22 Series Bedienungsanleitung

Ebyte

Ebyte E22-400M22S Bedienungsanleitung

Ebyte

Ebyte E22-230T22D Bedienungsanleitung

Ebyte

Ebyte E106-868G27P2 Bedienungsanleitung

Ebyte

Ebyte E32 Series Bedienungsanleitung

Ebyte

Ebyte E30-900M30S Bedienungsanleitung

Ebyte

Ebyte E10-433MD-SMA Bedienungsanleitung

Ebyte

Ebyte E220-400R30D Bedienungsanleitung

Ebyte

Ebyte E70-433T14S2 Bedienungsanleitung

Ebyte

Ebyte E43-433T13S3 Bedienungsanleitung

Ebyte

Ebyte E22-230T30D Bedienungsanleitung

Ebyte

Ebyte E32-433T20DT Bedienungsanleitung

Ebyte

Ebyte E49-400T20S Bedienungsanleitung

Ebyte

Ebyte E78 Series Bedienungsanleitung

Ebyte

Ebyte E01C-ML01SP2 Bedienungsanleitung

Ebyte

Ebyte E10-915MS30 Bedienungsanleitung

Ebyte

Ebyte E64 Series Bedienungsanleitung

Ebyte

Ebyte ESP32-S3-WROOM-1 Bedienungsanleitung

Ebyte

Ebyte E01C-ML01SP4 Bedienungsanleitung

Beliebte Drahtlosmodul Handbücher anderer Marken

Laird

Laird RM024 Bedienungsanleitung

Laird

Laird BT830-SA Kurzanleitung zur Einrichtung

Fibocom

Fibocom FM101-NA-20 Montageanleitung

Waldmann

Waldmann EnOcean TALK MODUL G2 Bedienungsanleitung

Smartech

Smartech LBT-1.DO4 Bedienungsanleitung

Cooper Wiring Devices

Cooper Wiring Devices ESPIRE RF RFAPM Bedienungsanleitung

Yuga

Yuga CLM920 Bedienungsanleitung

Waldmann

Waldmann TALK Bluetooth Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions UC864-G Installationshandbuch

Quectel

Quectel SC690A Series Beilage

Panasonic

Panasonic INDUSTRY PAN9028 Kurzanleitung zur Einrichtung

LongSung Technology

LongSung Technology U9507E Bedienungsanleitung

Wistron NeWeb

Wistron NeWeb DNUR-S2 Bedienungsanleitung

RF-Star

RF-Star SimpleLink RF-BM-2652P1 CC2652P Bedienungsanleitung

CHIEF

CHIEF AVMW Bedienungsanleitung

Huawei

Huawei EM701 Bedienungsanleitung

SIYI

SIYI FTM30 Bedienungsanleitung

RF-Star

RF-Star RF-BM-4055B1L Bedienungsanleitung