Yuga CLM920 Bedienungsanleitung
Product Name
4G Wireless Routing DTU User Manual
Number of Pages
20
Produce Version
V1.02
Date
2019/3/4
4G Wireless Routing
DTU User Manual
V1.02
Shang Hai YUGE Information Technology co., LTD
All rights reserved
4G Wireless Routing DTU User Manual
Shang Hai YUGE Information Technology co., LTD
Page
1
of
21
Update records
Version
Date
Author
Description
V1.01
2017/8/9
Yuge document group
Initial version
V1.02
2019/3/4
Yuge document group
The hardware revision is V1.3
webUI update
4G Wireless Routing DTU User Manual
Shang Hai YUGE Information Technology co., LTD
Page
2
of
21
Contents
Chapter 1. Overview................................................................................................................... 1
Chapter 2. WEBUI Management System................................................................................... 3
2.1 Login............................................................................................................................. 3
2.2 System Status................................................................................................................ 4
2.2.1 Network Status...................................................................................................4
2.2.2 LAN status......................................................................................................... 4
2.2.3 Device status...................................................................................................... 5
2.2.4 Traffic Statistics................................................................................................. 5
2.3 Basic settings.................................................................................................................6
2.3.1 LAN Setting....................................................................................................... 6
2.3.2 WI-FI Setting..................................................................................................... 7
2.3.4 Mobile network settings.....................................................................................7
2.3.5 PIN management................................................................................................8
2.4 Advanced settings......................................................................................................... 8
2.4.1 Data usage setting.............................................................................................. 8
2.4.2 MAC filter..........................................................................................................9
2.4.3 Port forward....................................................................................................... 9
2.4.4 Port Map...........................................................................................................10
2.4.5 DMZ.................................................................................................................10
2.4.6 VPN..................................................................................................................11
2.4.7 APN.................................................................................................................. 11
2.4.8 Network Mode................................................................................................. 12
2.4.9 WIFI Enable..................................................................................................... 12
2.4.10 Ethernet Enable.............................................................................................. 13
2.4.11 USB debug..................................................................................................... 13
2.5 Application setting...................................................................................................... 14
2.5.1 RS232...............................................................................................................14
2.5.2 RS485...............................................................................................................14
2.5.3 PING check...................................................................................................... 15
2.5.4 Reboot when disconnect.................................................................................. 15
2.5.5 Auto reboot setting........................................................................................... 16
2.6 System setting............................................................................................................. 16
2.6.1 Update Firmware..............................................................................................16
4G Wireless Routing DTU User Manual
Shang Hai YUGE Information Technology co., LTD
Page
3
of
21
2.6.2 User management.............................................................................................17
2.6.3 Telnet service....................................................................................................17
2.6.4 Reboot.............................................................................................................. 17
4G Wireless Routing DTU User Manual
Shang Hai YUGE Information Technology co., LTD
Page
1
of
21
Chapter 1. Overview
The 920_DTU is a DTU device based on the Qualcomm MDM9x07 platform. Support
4G full Netcom (depending on the configuration, some versions may not support CDMA or
some frequency bands), support Wi-Fi AP function, support Ethernet interface, support RS232
and RS485 interface.
The device provides a 10M/100M1000M adaptive Ethernet interface. The IP address is
automatically assigned by default. After the network cable is plugged in, the PC can use this
device to bring 4G network functions.
The device provides Wi-Fi AP functionality and supports 802.11b/g/n. The default name
of Wi-Fi SSID is DTU_AP_xxxx, and the default password is 12345678.
The device provides RS232 serial port and RS485 serial port, which can be used for
DTU transparent transmission data. After RS232 transparent transmission is configured in
WEBUI, the data received by the RS232 serial port can be transmitted to the server.
The default address of the device is 192.168.100.1. You can log in to the
http://192.168.100.1 WEBUI management page to set various settings. The login account is
admin:admin.
The following is the appearance of the device and the motherboard:
4G Wireless Routing DTU User Manual
Shang Hai YUGE Information Technology co., LTD
Page
2
of
21
Note:
The DC power supply voltage range is 5V to 36V. It is recommended to use the power
adapter.
The 4G indicator is green, and the 4G will always be on when connected to the network.
The power indicator is red and is constant after the power is connected.
The Ethernet indicator is green. It is always on after the RJ45 interface is connected to the
network cable, and blinks during communication.
The RS232 jumper cap must be connected, and the AT serial jumper cap cannot be
connected.
The Restore Factory button is used to delete user data. The reset button only resets the
system and reboots.
4G Wireless Routing DTU User Manual
Shang Hai YUGE Information Technology co., LTD
Page
3
of
21
Chapter 2. WEBUI Management System
The device default settings can work, or you can modify the default settings through the
WEBUI management page. The WEBUI management page supports Internet Explorer 11 and
higher, Firefox, Chrome, Safari and other major browsers.
2.1 Login
Open the browser, enter the address 192.168.100.1 and press Enter. The browser will
display the login interface of the web management system, enter the username admin,
password admin, and click Login to enter the management system.
Note:
If you enter the wrong username/password three times in a while, the login function will
be locked. You will not be able to log in to the web management system during the lockout
period. You can try to enter the password again after the lockout time has elapsed.
The default username/password is simple. For security reasons, users should change to a
more secure username/password after logging in to the system. For details on how to change
the username/password, see the "Login Account" section.
4G Wireless Routing DTU User Manual
Shang Hai YUGE Information Technology co., LTD
Page
4
of
21
2.2 System Status
2.2.1 Network Status
This page displays the current 4G network status and related information, such as the
connected network type (LTE, WCDMA, TD-SCDMA, etc.), signal strength value,
MCC/MNC, etc.
Note:
If you cannot register the network or cannot access the Internet, you can check the status
of this page to check whether the SIM card recognizes the normal, current network type and
signal strength.
This page will be refreshed automatically, so it may not match the 4G network indicator
or status bar. After the page is automatically refreshed, it can be refreshed manually.
If there is a problem with the network, you can modify the settings by referring to the
Mobile Network Settings page.
2.2.2 LAN status
The device functions as a router, Wi-Fi AP and Ethernet are a local area network. This
page displays information about the LAN related settings status and the LAN client list.
4G Wireless Routing DTU User Manual
Shang Hai YUGE Information Technology co., LTD
Page
5
of
21
2.2.3 Device status
This page shows the status of the device, such as system time, boot time, device version
number, etc.
Note:
The current time displayed is the time the device is synchronized from the network. If
there is a problem with the network connection, the time may be incorrect. The functions of
data flow statistics of this system need to be strictly in accordance with time.
This page can view the version number of WEBUI. You can view this page by general
device information.
2.2.4 Traffic Statistics
This page shows 4G traffic statistics
4G Wireless Routing DTU User Manual
Shang Hai YUGE Information Technology co., LTD
Page
6
of
21
Note:
The data traffic on the device side may be inconsistent with the carrier.
The traffic statistics function depends on the system time. Traffic statistics are not
available until the device time is synchronized to the network time.
In addition, if the device is often interrupted during use, it may cause inaccurate traffic
data.
2.3 Basic settings
2.3.1 LAN Setting
This page can set the LAN gateway address, gateway name, and enable the DHCP service
in the LAN. It is recommended to keep the default settings. Modify this setting only if it
conflicts with other network segments.
After setting the gateway name, you can log in to the WEBUI management page directly
using the gateway name. For example, you can use http://mydtu.com to log in to the WEBUI
management page without entering an IP address. The gateway name must be a valid domain
name
Andere Handbücher für CLM920
1
Inhaltsverzeichnis
Andere Yuga Drahtlosmodul Handbücher
Beliebte Drahtlosmodul Handbücher anderer Marken
Cooper Wiring Devices
Cooper Wiring Devices ESPIRE RF RFAPM Bedienungsanleitung
Waldmann
Waldmann TALK Bluetooth Bedienungsanleitung
Telit Wireless Solutions
Telit Wireless Solutions UC864-G Installationshandbuch
Ebyte
Ebyte E07-900M10S Bedienungsanleitung
Quectel
Quectel SC690A Series Beilage
Panasonic
Panasonic INDUSTRY PAN9028 Kurzanleitung zur Einrichtung
Ebyte
Ebyte E70-433NW30S Bedienungsanleitung
LongSung Technology
LongSung Technology U9507E Bedienungsanleitung
Wistron NeWeb
Wistron NeWeb DNUR-S2 Bedienungsanleitung
Ebyte
Ebyte E49-400M20S4 Bedienungsanleitung
RF-Star
RF-Star SimpleLink RF-BM-2652P1 CC2652P Bedienungsanleitung
Ebyte
Ebyte E18-TBH-27 Bedienungsanleitung