Eci Telecom B-FOCuS 312 Bedienungsanleitung
B-FOCuS
Router 312+
User Guide
http://www.ecitele.com/b-focus
B-FOCuS Router 312+ User Guide
ECI Telecom Ltd. Proprietary ii DWG# 458006-0833-010 A00
©Copyright by ECI Telecom 2005. All rights reserved worldwide.
The information contained in this document is proprietary and is subject to all relevant
copyright, patent, and other laws protecting intellectual property, as well as any specific
agreement protecting ECI rights in the aforesaid information. Neither this document nor the
information contained herein may be published, reproduced or disclosed to third parties, in
whole or in part, without the express, prior, written permission of ECI. In addition, any use of
this document or the information contained herein for any purposes other than those for which
it was disclosed is strictly forbidden.
ECI reserves the right, without prior notice or liability, to make changes in equipment design or
specifications.
Information supplied by ECI is believed to be accurate and reliable. However, no responsibility
is assumed by ECI for the use thereof nor for the rights of third parties, which may be affected
in any way by the use thereof.
Any representation(s) in this document concerning performance of ECI product(s) are for
informational purposes only and are not warranties of future performance, either express or
implied. ECI standard limited warranty, stated in its sales contract or order confirmation form,
is the only warranty offered by ECI in relation thereto.
This document may contain flaws, omissions, or typesetting errors; no warranty is granted nor
liability assumed in relation thereto unless specifically undertaken in ECI sales contract or
order confirmation. Information contained herein is periodically updated and changes will be
incorporated into subsequent editions. If you have encountered an error, please notify ECI. All
specifications are subject to change without prior notice.
B-FOCuS Router 312+ User Guide
ECI Telecom Ltd. Proprietary iii DWG# 458006-0833-010 A00
Table of Contents
1Introduction.......................................................................1
1.1 Package Contents .....................................................1
2Hardware Installation........................................................2
3Basic Software Configuration..........................................3
3.1 Logging In to Your Router..........................................3
3.2 Setting Up a Connection............................................5
4Safety Considerations......................................................7
5Buttons and LEDs.............................................................8
5.1 Buttons/Ports.............................................................8
5.2 LED Descriptions.......................................................9
5.3 LED Table................................................................10
6Troubleshooting..............................................................11
6.1 The Router is not Functional....................................11
6.2 The ADSL Link LED Blinks but Does Not Go Solid.12
6.3 The DSL Link LED is Always Off.............................12
B-FOCuS Router 312+ User Guide
ECI Telecom Ltd. Proprietary iv DWG# 458006-0833-010 A00
B-FOCuS Router 312+ User Guide
ECI Telecom Ltd. Proprietary 1 DWG# 458006-0833-010 A00
1 Introduction
Thank you for choosing ECI Telecom’s B-FOCuS 312+ Router as your gateway
to the world of fast Internet. Your new router is a state-of-the-art unit that
includes an ADSL router and an advanced router, enabling you to create and
connect a network of computers to a single ADSL line. Your router also
provides a powerful firewall that will secure your home network and computers
from unwelcome intrusions.
1.1 Package Contents
Please check that your package contains the following items.
Table 1. B-FOCuS 312+ Package Contents
Item Equipment Description Quantity
1 B-FOCuS 312+ router 1
2
AC power adaptor 12V,
1A 1
3
RJ-45 cable for
connecting router to
computer via 10/100
base-T Ethernet port
1
4
RJ-11 cable for
connecting to the ADSL
line 1
B-FOCuS Router 312+ User Guide
ECI Telecom Ltd. Proprietary 2 DWG# 458006-0833-010 A00
2 Hardware Installation
The following diagram and explanations will help you install your router.
Figure 1. B-FOCuS 312+ Router Connection Diagram
To connect your router
1. Connect one end of the RJ-45 Ethernet cable to a LAN port on your
router and the other end to the LAN port of one computer.
2. Connect one end of the RJ-11 telephone cable to the ADSL port on the
back of your router and connect the other end to the ADSL port on the
phone line splitter.
3. Connect the AC power adapter. Only use the power adapter supplied
with the router.
4. Turn on the power and proceed to Section 3, Basic Software
Configuration.
B-FOCuS Router 312+ User Guide
ECI Telecom Ltd. Proprietary 3 DWG# 458006-0833-010 A00
3 Basic Software Configuration
In order to connect to your service, you must set up your router as described in
this section.
3.1 Logging in to Your Router
To open the configuration options of your router, use your Internet browser.
To log in to your router
1. Open your Internet browser and type 10.0.0.138 in the address bar.
The Log In window is displayed.
2. Enter the username Admin and password Admin.
Note: The username and password are case-sensitive.
3. Click Log In. The Home Page window is displayed.
If you are unable to open the Configuration utility, perform the following
steps.
a. From the computer desktop, select Start > Settings > Network
and Dial-up Connections > Local Area Network. To restart
your network card, click Disable and then restart the network
card. Try again to log in to the configuration utility.
B-FOCuS Router 312+ User Guide
ECI Telecom Ltd. Proprietary 4 DWG# 458006-0833-010 A00
b. If you are still unable to connect to the configuration utility, then
from your Internet browser, select Tools > Internet Options and
click Delete Cookies, Delete Files, and Clear History. Try again
to log in to the configuration utility.
4. Click the Setup tab.
You have logged in to the configuration utility and are now ready to configure
your router.
B-FOCuS Router 312+ User Guide
ECI Telecom Ltd. Proprietary 5 DWG# 458006-0833-010 A00
3.2 Setting Up a Connection
To set up a new connection
1. From the Setup window, click New Connection. The Connection Setup
window is displayed.
2. Give your new connection a name.
Note: Any name is legal, for example, the name of your service
provider, but you may not use spaces or special
characters.
3. In the Options section, it is recommended to enable NAT and Firewall in
order to protect your network from intrusions.
4. Configure the parameters for the network.
B-FOCuS Router 312+ User Guide
ECI Telecom Ltd. Proprietary 6 DWG# 458006-0833-010 A00
For the connection Type, select according to your network type, for a
home network, choose PPPoE.
In the PVC Settings section, in the VPI box, type 8. In the VCI box, type
35.
5. Click Apply.
6. To save the changes, click the Tools button (at the top of the page) and
select System Commands. From the System Commands page, click
Save All.
7. To make the changes effective, click the Tools button (at the top of the
page) and select System Commands. From the System Commands
page, click Restart. The Restart Confirmation message box is displayed.
8. Click OK.
You have completed the basic software configuration for your router. The router
will restart after a few seconds and connect to the Internet. Open your browser
and enjoy surfing the net.
If you are unable to connect to the Internet, see Section 6, Troubleshooting.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Eci Telecom Netzwerk-Router Handbücher
Beliebte Netzwerk-Router Handbücher anderer Marken
NETGEAR
NETGEAR FS526T - Switch Bedienungsanleitung
Korenix
Korenix JetNet 5710G Series Bedienungsanleitung
Automated Logic
Automated Logic ZN551 Betriebsanleitung
Cisco
Cisco ASR 1000 Series Bedienerhandbuch
EnGenius
EnGenius ESR-9710 Bedienungsanleitung
Cisco
Cisco 805 Series Bedienungs- und Sicherheitshinweise