Ecoer ECT01 Bedienungsanleitung

ECT Install and User Guide

Feb 2023

0of 61 ECOER INC.

Manufacturer reserves the right to change specifications or designs without notice.

Appearance of the product may vary.

ECT01 Wi-Fi

Programmable Thermostat

Install and User Guide

1. Safety precaution --------------------------------------------

2. Installation accessory ---------------------------------------

3. Installation method -----------------------------------------

4. Specification ---------------------------------------------------

5. Feature and function of the wired controller ----------

6. Name on the LCD of the wired controller -------------

7. Name of button on the wired controller ----------------

8. Preparatory operation ----------------------------------------

9. Operation -----------------------------------------------------------

10. Timer functions --------------------------------------------------

11. Weekly Timer 1 --------------------------------------------------

12. Weekly Timer 2 -------------------------------------------------

13. Fault alarm handing -------------------------------------------

14. Technical indication and requirement -----------------

15. Queries and settings ------------------------------------------

16. Wireless control connection --------------------------------

ECT Install and User Guide

Feb 2023

1of 61 ECOER INC.

Manufacturer reserves the right to change specifications or designs without notice.

This manual gives detailed description of the

precautions that should be brought to your attention

during operation.

In order to ensure correct service of the wired

controller please read this manual carefully before

using the unit.

For convenience of future reference, keep this manual

after reading it.

All the pictures in this manual are for explanation

purpose only. There may be slightly different from the

wired remote controller you purchased (depend on

model). The actual shape shall prevail.

ECT Install and User Guide

Feb 2023

2of 61 ECOER INC.

Manufacturer reserves the right to change specifications or designs without notice.

NOTE

•Please entrust the distributor or professionals to install the unit.

•Installation by other persons may lead to imperfect installation,

electric shock or fire.

•Adhere to this installation manual.

•Improper installation may lead to electric shock or fire.

•Reinstallation must be performed by professionals.

WARNING

Do not uninstall the unit randomly.

Random uninstalling may lead to abnormal operation, heating or

fire of the air condition.

•Do not install the unit in a place vulnerable to leakage of

flammable gases. Once flammable gases are leaked and left

around the wire controller, fire may occur.

•Do not operate with wet hands or let water enter the wire

controller. Otherwise, electric shock may occur.

•The wiring should adapt to the wire controller current. Otherwise,

electric leakage or heating may occur and result in fire.

1. Safety Precaution

ECT Install and User Guide

Feb 2023

3of 61 ECOER INC.

Manufacturer reserves the right to change specifications or designs without notice.

No. Name Qty. Remarks

1Wire controller 1

2Installation and owner’s manual 1

3Screws 3M3.9*25 (For Mounting on the Wall)

4Wall plugs 3For Mounting on the Wall

5Screws 2M4X25 (For Mounting on switch box)

6Plastic screw bars 2For fixing on switch box

7Battery 1CR2032 3V

8The connective wires group 1Standard signal wires group

9Screw 1M4X8(For Mounting the connective wire group)

NOTE

•The specified cables shall be applied in the wiring. No external

force may be applied to the terminal. Otherwise, wire cut and

heating may occur and result in fire.

2. Installation accessory

Select the installation location

Don’t install at the place where cover with heavy oil, vapor or

sulfureted gas, otherwise, this product would be deformed that

would lead to system malfunction.

Preparation before installation

2.1 Please confirm that all the following parts you have been

supply.

ECT Install and User Guide

Feb 2023

4of 61 ECOER INC.

Manufacturer reserves the right to change specifications or designs without notice.

No. Name Qty.(embeded

into wall)

Specification

(only for reference) Remarks

1Switch box 1

Wiring Tube(Insulating

Sleeve and Tightening

Screw)

Precaution of installing the wire controller

1. This manual provides the installation method of wired controller.

Please refer to the wiring diagram of this installation manual to

connect the wire controller with indoor unit.

2. The wired controller works in low voltage loop circuit.Forbid to

directly contact the cable of high voltage above, like

115V,220V,380V, and don’t wire this kind of wire in the said loop;

wiring clearance between configured tubes should be at the

range of 300~500mm or above.

3. The Shielded wire of the wired controller must be grounded

firmly.

4. Upon finish the wire controller connection, do not employed

tram egger to detect the insulation.

2. 2 Prepare the following assemblies on the site.

ECT Install and User Guide

Feb 2023

5of 61 ECOER INC.

Manufacturer reserves the right to change specifications or designs without notice.

Fig 3-2

Fig 3-1

19mm84mm

46mm

60mm

44mm

120mm

Back cover

20.6mm

Buckling

position

•Insert a slot screwdriver into the

slots in the lower part of the wired

controller (2 places), and remove

the upper part of the wire

controller. (Fig.3-2)

3.1 Wired remote controller structural dimensions

3. Installation method

3.2 Remove the upper part of wired controller

NOTE : Do not pry up and down, you can only rotate the screwdriver.

ECT Install and User Guide

Feb 2023

6of 61 ECOER INC.

Manufacturer reserves the right to change specifications or designs without notice.

Screw hole fixed on the wall,useone ST3.9*25mm

Fig 3-3

Back plate

Screws(ST3.9*25)

•For exposed mounting, fasten the back plate on the wall with the

3 screws (ST3.9*25) and plugs. (Fig.3-3)

3.3 Fasten the back plate of the wired

NOTE :The PCB is mounted in the upper part of the wired controller.

Be careful not to damage the board with the slot screwdriver.

•Use two M4X25 screws to install the back cover on the 86 switch

box, and use one ST3.9*25 screw to fix to the wall.

Screw hole installed on 86 switch box, use two M4*25mm

Fig 3-4

ECT Install and User Guide

Feb 2023

7of 61 ECOER INC.

Manufacturer reserves the right to change specifications or designs without notice.

3.4 Battery installation

NOTE :Put on aflat surface.Be careful not to distort the back

plate of the wire controller by overtightening the mounting screws.

•Put the battery into the installationsite and make sure the positive

side of the battery is in accordance with the positive side of

installationsite. (See Fig.3-5)

•Please set the time corrected on the first time operation. Batteries

in the wire controller can time under power failure which ensure

the time keep right. When the power restores, if the time

displayed is not correct, it means the battery is dead and replace

the battery.

Fig 3-5

ECT Install and User Guide

Feb 2023

8of 61 ECOER INC.

Manufacturer reserves the right to change specifications or designs without notice.

3.5 Wire with the indoor unit

44mm

60mm Wiring

hole

switch box

HA HB

Fig 3-6

Indoor unit

Notch the part for the wiring to pass through with nippers, etc.

Connect the terminals on the wired controller (HA ,HB), and the

terminals of the indoor unit (HA ,HB). (HA and HB do not have polarity.)

NOTE :

•DO NOT allow water to enter the wired control.Use the trap and

putty to seal the wires.

•Connecting wires must be fixed reliably and cannot be pulled.

•These signal wires are equipped on site.

ECT Install and User Guide

Feb 2023

9of 61 ECOER INC.

Manufacturer reserves the right to change specifications or designs without notice.

HA HB

Indoor Unit

Wired Controller Fig.3-7

For some units, the wired controller connects to the unit HA and HB

ports through the HA and HB ports. There is no polarity between HA

and HB. See Fig. 3-7

Inhaltsverzeichnis

Andere Ecoer Thermostat Handbücher

Ecoer

Ecoer EST01 Bedienungsanleitung

Ecoer

Ecoer EST01 Bedienungsanleitung

Ecoer

Ecoer EST02 Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Honeywell

Honeywell CM721 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

Honeywell

Honeywell RLV4305 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 THX9421 Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung