5. Pedals:
• Assemble both pedals to the bike by screwing them to the Crank &
pedals leg.!!!!!!!!!!
Brake-sets adjustment
Make sure that the brake pads are not rubbing or locking the front /
rear disc, while you're not pressing the brake-levers.
• In case in which the disc rubs / locked into the brake pads. Release
a bit both of the caliper screws (the screws that connect the caliper
to the fork), tightly press on the brake - lever and re-screw back the
screws into their place while continuously pressing on the lever.
Warning!
In order to avoid damage to frame that can lead for frame
sudden breaking, always make sure that the safety line that
marked on the saddle's tube is hidden from the eye while
locking the saddle into its place.
Notice!
For safe and comfortable riding, there should be clearance of
no less than 1-2 inches between the rider and the top tube of
the bicycle frame, while the rider straddles the bicycle with
both feet on the ground.
