ECOSAFE DS24 Bedienungsanleitung

Range DL –DS24

Instruction manual

ECOSAFE | Date of the document : 30/04/2019 –Version : 01

Instruction manual

For safety shower

Model DS24

Range DL –DS24

Instruction manual

Série DL –DLP64

Manuel d’utilisation

ECOSAFE | Date of the document : 30/04/2019 –Version : 01

CONTENT

1. Description / Use Page 2

2. Technical features Page 2

3. Location Page 2

4. Installation Page 2

5. Safety controls Page 3

6. Spare parts Page 3

7. Warranty Page 4

8. Control sheet for the user Page 5

9. Annex –Schema Page 6

Range DL –DS24

Instruction manual

Série DL –DLP64

Manuel d’utilisation

ECOSAFE | Date of the document : 30/04/2019 –Version : 01

1. DESCRIPTION / USE

For people’s safety, the safety showers and eyewashers are essential in the premises where risks of chemicals projection exist. They

are recommended in the chemical and pharmaceutical industries, automobile and food-processing industries, hospitals, water-

treatment plants and swimming pools…

The first-aid equipments such as showers and eye-washers have to be installed near the zones of danger. They must remain easy to

access at all time and have clear normalized pictogram indications (supplied with our equipments).

2. TECHNICAL FEATURES

▪Safety shower for internal use

▪Compliance with the EN 15154-1 and NF X 15-221 standards

▪Wall fixation

▪Manual operation

▪Pipe in galvanized steel + grey epoxy paint RAL 7040

▪Shower head in ABS + green epoxy paint RAL 6032

▪Water supply : F 1”

▪Shower flow : 90 L /min

▪Weight : 4 KG

3. LOCATION

Safety showers have to be installed right next to the hazard zone. They have to be reachable within 10 seconds or 30 meters

maximum. We recommend having multiple sets of first-aid equipment in case of simultaneous risk of accidents.

First-aid equipments have to be visible and clearly identifiable through normalized pictograms it is supplied with.

The staff of the company has to be trained to the use of these equipments.

The safety shower has to be connected to a water supply.

The pressure has to be situated between 2 and 3 bars.

The staff of the company has to be trained to the use of these first-aid equipments.

4. INSTALLATION

Once your equipment has been delivered, please ensure that you received all the elements, thanks to the schema below.

Then, assemble the equipment, thanks to the outline, too.

Range DL –DS24

Instruction manual

Série DL –DLP64

Manuel d’utilisation

ECOSAFE | Date of the document : 30/04/2019 –Version : 01

We remind you that these equipments have to be mounted and installed by a qualified staff (plumber…).

5. SAFETY CONTROLS

As to guarantee the perfect efficiency of the equipment, we highly recommend checking it at least once a week.

Daily controls :

▪Check the efficiency of the valves

Monthly controls :

▪Check the efficiency of the valves

▪Check that the water flow works properly

▪Check that the pictograms are visible and in a good condition

These checks have to be done by your maintenance department.

You have to clean the equipment with soapy water, as not to deteriorate it.

We remind you that you must wear, for any intervention, appropriate individual protection equipment.

6. SPARE PARTS

Elements :

▪Shower head : P/N 9000

▪1” Valve : P/N 2634FF

▪Pictogram for safety shower : P/N V668

Range DL –DS24

Instruction manual

Série DL –DLP64

Manuel d’utilisation

ECOSAFE | Date of the document : 30/04/2019 –Version : 01

7. WARRANTY

Your equipment holds a 12 months warranty against every manufacturing defect (limited to ordinary conditions of use, from the date

indicated on the delivery note).

Our warranty can be applied only in case of manufacturing defects or hidden fault. The warranty covers only the replacement of the

faulty goods or pieces indicated by our quality or technical department, as they are the only one able to determine the condition. Repair

of the equipment must be performed in our warehouse.

The spare parts are under 3 months warranty upon their settlement.

The warranty cannot be applied in the following cases :

- The equipment has not been stored, used or maintained in accordance with the standards by the user

- In case of a damage of the equipment by the user or a third party

- The equipment had a modification or a repair by the user or a third party, without any prior written authorization by ECOSAFE

- In case of a bad use of the equipment

- In case of a normal attrition of the equipment

- In case of a bad installation of the equipment

- In case of damage caused by the corrosion

The activation of the warranty won’t extend the term. Our warranty stops if the customer has not notified us in a 7 days term after

seeing the fault ; date that the customer has to prove.

Range DL –DS24

Instruction manual

Série DL –DLP64

Manuel d’utilisation

ECOSAFE | Date of the document : 30/04/2019 –Version : 01

8. CONTROL SHEET FOR THE USER

YES

The valves work properly

The water flow works properly

The pictograms are visible and in good condition

Remarks :

Date :

By :

Signature

Range DL –DS24

Instruction manual

Série DL –DLP64

Manuel d’utilisation

ECOSAFE | Date of the document : 30/04/2019 –Version : 01

Annex - Schema

Inhaltsverzeichnis

Andere ECOSAFE Sicherheitsausrüstung Handbücher

ECOSAFE

ECOSAFE AMS20 Bedienungsanleitung

ECOSAFE

ECOSAFE LV14 Bedienungsanleitung

ECOSAFE

ECOSAFE DLP62 Bedienungsanleitung

ECOSAFE

ECOSAFE DLI92 Bedienungsanleitung

ECOSAFE

ECOSAFE DS32 Bedienungsanleitung

ECOSAFE

ECOSAFE S2004T Bedienungsanleitung

ECOSAFE

ECOSAFE AMS200 Bedienungsanleitung

ECOSAFE

ECOSAFE LV12 Bedienungsanleitung

ECOSAFE

ECOSAFE AMS10 Bedienungsanleitung

Beliebte Sicherheitsausrüstung Handbücher anderer Marken

Innova

Innova Xtirpa Bedienungsanleitung

bolle SAFETY

bolle SAFETY B810 Bedienungsanleitung

SHENZHEN FANHAI SANJIANG ELECTRONICS

SHENZHEN FANHAI SANJIANG ELECTRONICS A9060T Bedienungsanleitung

Hiltron security

Hiltron security POWER8E Leitfaden

Hatco

Hatco B-950P Bedienungsanleitung

Sitec

Sitec TX MATIC Bedienungsanleitung

TEUFELBERGER

TEUFELBERGER GRIP 12 Bedienungsanleitung

MSA

MSA PremAire System Bedienungsanleitung

AMC

AMC 1022M Series Bedienungsanleitung

Trinity

Trinity CASS S3 Bedienungsanleitung

CMC

CMC Helitack HotSeat Bedienungsanleitung

Force

Force P-35 Bedienungsanleitung

ACM

ACM SAFETY D200 Produkthandbuch

Honeywell

Honeywell Miller H-Design DuraFlex Bedienerhandbuch

ROCK

ROCK P-451 AS Bedienungsanleitung

Power first

Power first 2XYR7A Service-Handbuch

SCHUBERTH

SCHUBERTH SHP 28-C Bedienungsanleitung

Trango

Trango CINCH Bedienungsanleitung