ECS GQ Notebook Bedienungsanleitung
GQ Notebook
U
Us
se
er
r'
's
s
G
Gu
ui
id
de
e
P
Pr
re
ef
fa
ac
ce
e
Copyright 2003
All Rights Reserved.
Manual edition, August 2003
The information in this document is subject to change without prior notice in order
to improve reliability, design and function and does not represent a commitment
on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental,
or consequential damages arising out of the use or inability to use the product or
documentation, even if advised of the possibility of such damages.
This document contains proprietary information protected by copyright. All rights
are reserved. No part of this manual may be reproduced by any mechanical,
electronic, or other means in any form without prior written permission of the
manufacturer.
T
Tr
ra
ad
de
em
ma
ar
rk
ks
s
CardSoft is a trademark of SystemSoft Corporation. AutoCAD and Autoshade are
trademarks of Autodesk, Inc. IBM, OS/2, and VGA are trademarks of International
Business Machines Corp. Lotus, 1-2-3, and Symphony are trademarks of Lotus
Development Corp. Windows, Word, MS-DOS, and Microsoft are trademarks of
Microsoft Corp. VESA is a trademark of Video Electronics Standards Association.
Other product names mentioned herein are used for identification purposes only
and may be trademarks and/or registered trademarks of their respective
companies.
L
Li
im
mi
it
ta
at
ti
io
on
n
o
of
f
L
Li
ia
ab
bi
il
li
it
ty
y
While reasonable efforts have been made to ensure the accuracy of this manual,
the manufacturer and distributor assume no liability resulting from errors or
omissions in this manual, or from the use of the information contained herein.
N
No
ot
ti
ic
ce
es
s
F
Fe
ed
de
er
ra
al
l
C
Co
om
mm
mu
un
ni
ic
ca
at
ti
io
on
ns
s
C
Co
om
mm
mi
is
ss
si
io
on
n
R
Ra
ad
di
io
o
F
Fr
re
eq
qu
ue
en
nc
cy
y
I
In
nt
te
er
rf
fe
er
re
en
nc
ce
e
S
St
ta
at
te
em
me
en
nt
t
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and if not installed and used in
accordance with the instruction manual may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio TV technician for help.
ii
N
No
ot
ti
ic
ce
e:
:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. Shielded
interface cables and a non-shielded AC power cord must be used in order to
comply with emission limits.
This equipment is to be used with power supply:
I/P: 100-240 Vac, 50-60Hz, 1.6A max
O/P: 19Vdc, 3.16A
C
Ca
an
na
ad
di
ia
an
n
D
DO
OC
C
N
No
ot
ti
ic
ce
e
F
Fo
or
r
C
Cl
la
as
ss
s
B
B
C
Co
om
mp
pu
ut
ti
in
ng
g
D
De
ev
vi
ic
ce
es
s
This Class B digital apparatus meets all requirements of the Canadian
Interference - Causing Equipment Regulations.
Cet appareil numerique de la classe B repecte toutes les exigences du Règlement
sur le matèriel brouilleur du Canada.
S
Sa
af
fe
et
ty
y
P
Pr
re
ec
ca
au
ut
ti
io
on
ns
s
This section is designed to assist you in identifying potentially unsafe conditions
while working with this product. Required safety features have been installed in
the computer to protect you from injury. However, you should use good judgment
to identify potential safety hazards:
Please read these safety instructions carefully.
Please keep this User's Manual for later reference.
Please disconnect this equipment from AC outlet before cleaning. Don't use liquid or
sprayed detergent for cleaning. Use moisture sheet or cloth for cleaning.
- iii -
For pluggable equipment, that the socket-outlet shall be installed near the equipment and
shall be easily accessible.
Please keep this equipment from humidity.
Lay this equipment on a reliable surface when isntall. A drop or fall could cause injury.
Make sure to use the right voltage for the power source when connecting the equipment to
the power outlet.
Place the power cord in such a way that people can not setp on it. Do not place anything
on top of the power cord.
All cautions and warnings on the equipment should be noted.
If the equipment is not used for a long time, disconnect the equipment from the main
power outlet to avoid being damaged by transient overvoltage.
Never pour any liquid into the opening, this could cause fire or electrical shock.
Never open the equipment. For safety reason, the equipment should only be opened by a
qualified service personnel.
If on the following situations arises, get the equipment checked by a service personnel:
a
a.
.
b
b.
.
c
c.
.
d
d.
.
e
e.
.
f
f.
.
The Power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment has not work well or you cannot get it work according to the
user's manual.
The equipment has dropped and damaged.
If the equipment has obvious sign of breakage.
Do not leave this equipment in an environment unconditioned, storage temperature above
iv
60°C (140°f), it may damage the equipment.
The unit can be operated at an ambient temperature of max. 35°C.
The sound pressure level at the operators position according to IEC 704-1: 1982 is equal
or less than 70 dB(A).
Power Cord Requirements
The power cord set used with the AC adaptor must meet the requirements of the country
where you use the AC adaptor, whether it is 100-120 or 200-240 Vac. The following
information explains the requirements for power cord set selection.
• The cord set must be approved for the country in which it is used.
• The appliance coupler must have a configuration for mating with a
CEE22/EN6032/IEC 320 appliance inlet.
A. For U.S. and Canada:
• The cord set must be UL Listed and CSA Certified.
• The minimum specifications for the flexible cord are No. 18 AWG.
B. For Japan:
• All components of the cord set must bear a “ T ” mark and registration
number in accordance with the Japanese Dentori Law.
• The minimum specifications for the flexible cord are .75m ㎡conductors.
C. For Other Countries:
• The cord set fittings must bear the certification mark of the agency
responsible for evaluation in a specific country.
• The flexible cord must be of a HAR (harmonized) type H05VV-F.
• The cord set must have a current capacity of a least 2.5 Amperes and
voltage rating of 125 or 250 Vac.
When using your telephone equipment, basic safety precautions should always be
- v -
followed to reduce the risk of fire, electric shock and injury to persons. These precautions
includes the following:
1. Do not use this product near water, for example, near a bathtub,
washbowl, kitchen sink or laundry tub, in a wet basement or near a
swimming pool.
2. Avoid using a telephone (other than a cordless type) during an
electrical storm. There may be a remote risk of electric shock from
lightning.
3. Do not use the telephone to report a gas leak in the vicinity of the
leak.
4. Use only the power cord indicated in this manual.
Do not use the AC adapter near open water or other liquids. Never spill liquid into the AC
adapter.
Laser Warning: Laser Class I Product Caution - Invisible laser radiation when open avoid
exposure to beam.
Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type recommended by the manufacturer. Dispose of used batteries according
to the manufacturer's instructions. Never remove the battery pack while the power is on
as this may result in data loss when the system loses power.
vi
P
Pe
er
rs
so
on
na
al
l
I
In
nv
ve
en
nt
to
or
ry
y
This Mobile PC system is designed for years of productive and pleasurable
computing. Use this section to keep notes about details of your purchase.
Update this section when you add new options.
Date of Purchase:
Dealer’s Name:
Phone:
Address:
E-Mail Address:
WWW Site:
Serial Number:
CPU Type:
Hard Disk Capacity:
Memory Capacity:
Optional Equipment:
- vii -
Inhaltsverzeichnis
Andere ECS Laptop Handbücher
ECS
ECS ES10IS2 Bedienungsanleitung
ECS
ECS G733G Bedienungsanleitung
ECS
ECS EF20RA Bedienungsanleitung
ECS
ECS H41IA1 Bedienungsanleitung
ECS
ECS EC10II2 Bedienungsanleitung
ECS
ECS Intel-powered Convertible Classmate PC Bedienungsanleitung
ECS
ECS Notebook computer Bedienungsanleitung
ECS
ECS Intel-powered Classmate PC Bedienungsanleitung
ECS
ECS I41SI Bedienungsanleitung
ECS
ECS EG20BAX Bedienungsanleitung
ECS
ECS TL10IE2 Bedienungsanleitung
ECS
ECS BR40II7 Bedienungsanleitung
ECS
ECS ED20PA2 Bedienungsanleitung
ECS
ECS T30II Bedienungsanleitung
ECS
ECS G799 Standard Bedienungsanleitung
ECS
ECS Notebook computer Bedienungsanleitung
ECS
ECS MB40IAX Bedienungsanleitung
ECS
ECS T20IL1 Bedienungsanleitung
ECS
ECS O40 Series Bedienungsanleitung
ECS
ECS E10IL1 Bedienungsanleitung
