Eddyfi R-Scan Array Bedienungsanleitung

User’s

Manual

R-SCAN ARRAY

Semi-automated phased-array corrosion mapping solution.

Clos Llyn Cwm, Swansea Enterprise Park, Swansea,

SA6 8QY, Wales, UK.

R-Scan Array User Manual Version 2.0

The text, figures and programs have been worked out with the utmost care. However, we cannot accept either legal responsibility or any liability for any incorrect

Eddyfi reserves the right to continue developing the system and software without documenting each individual case. Eddyfi holds no responsibility for any damage or

destruction caused when following instructions within this manual.

This manual is part of the original documentation supplied with the R-Scan Array system.

July 2021.

Table of Contents

Precautions and Conventions.............................................................................................. 5

General Precautions.................................................................................................................6

Safety Precautions ...................................................................................................................6

Magnetic Field ......................................................................................................................6

Pacemakers or other Medical Devices and Mechanical Implants ..............................................6

Finger Trap ...........................................................................................................................6

Conventions ............................................................................................................................7

Safety Indications in This Document ......................................................................................7

Limited Warranty.....................................................................................................................7

Copyrights...............................................................................................................................9

R-Scan Array .................................................................................................................... 10

Introducing R-Scan Array ........................................................................................................ 11

Phased-Array Corrosion Mapping ......................................................................................... 11

R-Scan Array Operation Modes............................................................................................. 11

What’s in the Box................................................................................................................... 12

R-Scan Array ...................................................................................................................... 12

R-Scan Array Overview........................................................................................................... 13

Scanner Components.......................................................................................................... 13

Front Isometric View ........................................................................................................... 14

Rear Isometric View ............................................................................................................ 15

Magnetic Wheels ................................................................................................................ 16

Water box .......................................................................................................................... 17

R-Scan Array General Specifications ....................................................................................... 18

Inspection Surface Specifications ......................................................................................... 18

System Storage .................................................................................................................. 18

System Encoder Resolution.................................................................................................. 18

System Technical Specifications........................................................................................... 18

R-Scan Array Specifications.................................................................................................... 19

R-Scan Array Setup and Operation .........................................................................................20

Manual mode .....................................................................................................................20

Manual mode scanning pattern ....................................................................................... 21

Automatic mode ................................................................................................................ 22

R-Scan Array Maintenance ................................................................................................23

Technical Support ..................................................................................................................24

Troubleshooting .....................................................................................................................24

Maintenance ......................................................................................................................... 25

Handle replacement ........................................................................................................... 25

Probe lock cam lever and plunger replacement ....................................................................26

Rear probe lock cam lever................................................................................................26

Side Probe lock cam lever ................................................................................................ 27

Wheel Brake Shoe replacement ...........................................................................................28

Wheel Replacement............................................................................................................29

O-ring replacement for high friction wheels..........................................................................30

Precautions and

Conventions

General Precautions

The following precautions are to be observed at all times when using the R-Scan Array scanner.

Please ensure that you review them before utilizing the system:

• Keep this document in a safe place for future reference.

• Carefully follow the installation and operation procedures detailed herein.

• Observe all warnings, notes and instructions as marked on the packaging, the scanner, and

detailed in the user manual.

• When transporting, it is your responsibility to follow all safety precautions as dictated by

the relevant local governing bodies.

• The equipment must not be used for purposes other than those intended. Eddyfi assumes

no responsibility for any damage resulting from such improper usage.

• Do not use substitute parts or perform unauthorized modifications to the system.

• If the system does not operate normally, please contact Eddyfi for assistance.

Safety Precautions

During operation of the R-Scan Array system please observe the safety warning and precautions.

Magnetic Field

The wheels of the R-Scan Array scanner contain magnets that produce an extremely strong

magnetic field which may cause failure or permanent damage to items such as watches, memory

devices, CRT monitors, and medical or other electronics devices.

Any form of credit card, security pass, computer or programmed equipment may be permanently

affected if exposed to the magnetic field of the system.

Pacemakers or other Medical Devices and Mechanical Implants

Powerful magnets may interfere with medical electronics such as pacemakers, defibrillators, or

other internal and external medical devices. The interference can be severe and cause malfunctions.

Individuals wearing such devices should not handle strong magnets. If any user has any type of

electronic, mechanical, implanted, or external medical device, they should consult a physician and

the manufacturer of the medical device to determine its susceptibility to static magnetic fields prior

to allowing them to handle the R-Scan Array system. All magnetic products should be kept at a

safe distance from individuals with such devices.

Finger Trap

Due to the powerful magnets involved care must always be taken when handling and using the R-

Scan Array system, especially when deploying and removing the scanner from the inspection surface

as the system will exhibit a strong attractive force and present a finger trap.

Loose ferrous material such as tools, metal objects or magnets will be attracted to the systems

magnetic wheels and may cause injury as they move towards them. Always ensure to work in a

clean area, carefully follow handling instructions and be vigilant.

Conventions

Safety Indications in This Document

The safety indications in this document are intended to ensure operator safety and the integrity of

the system.

DANGER!

Danger statements are a description of an imminent hazardous procedure or a practice (or the like)

that, if performed incorrectly, can result in severe injury or death if not avoided and should be

limited to the most extreme situations. Do not ignore danger indications, ensure the condition is

understood before proceeding.

WARNING!

Warning statements are a description of a potentially hazardous procedure or a practice (or the

like) that, if not avoided or if performed incorrectly, could result in injury. Do not ignore warning

indications, ensure the condition is understood before proceeding.

CAUTION!

Caution statements are a description of a potentially hazardous procedure or a practice (or the

like) that, if not avoided or if performed incorrectly, could result in material damage, loss of data,

or both. Do not ignore caution indications, ensure the condition is understood before proceeding.

TETHER LINE

A suitable safety line must be attached to the handle of the R-Scan Array scanner during manual

operation. Attach the tether line BEFORE placing the R-Scan Array scanner onto the inspection

surface.

IMPORTANT

Calls the attention to information important to completing tasks.

NOTE

Calls the attention to an operating procedure, a practice, or the like that requires special attention.

Limited Warranty

LIMITED PRODUCT WARRANTY: Except as otherwise agreed to by EDDYFI in writing, products such

as instruments, mechanical products, spare parts, probes and cables are warranted, to the original

Customer only, for use solely by Customer or direct affiliate, against defects in material and

workmanship for a period of twelve (12) months from the date of delivery. Additional coverage may

be provided under any Hardware Maintenance Plan (HMP) purchased by the Customer. Probes and

cables are considered consumables and require periodic replacement due to wear. EDDYFI does not

warrant the service life of probes, cables and other consumables. EDDYFI does not warrant any

products against damages or defects caused by wear and tear, negligence, misuse, abnormal

operating conditions, alterations or damage caused by events beyond the control of EDDYFI. EDDYFI

shall not be liable for product defects caused by or resulting from any inaccuracies in any drawing,

description or specification supplied by the Customer. Upon Customers written request during the

warranty period, EDDYFI, at its choice, will repair or replace defective products within a reasonable

time. The original term of warranty applies, without extension, for repaired or replacement

products. All defective product shall be sent to EDDYFI freight prepaid by Customer in packaging

appropriate to prevent damage in transit. The Limited Product Warranty does not apply to periodic

calibration or minor maintenance as described in products operating manuals. All Customer paid

repairs performed by EDDYFI are warranted against defects in materials and workmanship for

ninety (90) days from the completion of repair. Upon Customer’s written notice of defect within

the ninety (90) day period, EDDYFI will replace the defective part(s) and/or re-perform the service.

This warranty is limited to failures in areas directly related to the repair performed. EDDYFI does not

warrant any non-EDDYFI products.

SOFTWARE: Any software related to the products is subject to specific Software License Agreement

or Software Subscription Agreement. The software is not sold but granted under a non-exclusive

and restrictive license. The software must be used with the software-enable hardware or software

key supplied by EDDYFI.

TECHNICAL SUPPORT: Eddyfi shall have no obligations to provide technical support and expertise

for i) Hardware Product that are not under a valid calibration certificate or under a valid Hardware

Maintenance Plan (HMP), and ii) Software that has not been updated to the latest version available

under a Software Subscription or a Software Maintenance Plan.

LIMITED SERVICE WARRANTY: EDDYFI agrees to perform service for Customer on the expressed

condition that EDDYFI’s sole obligation will be that the service will be performed in a professional

and competent manner and will be of the kind and quality described in the EDDYFI quotation.

EDDYFI does not warrant the fitness, suitability, or condition of Customer’s equipment upon which

EDDYFI services are performed. If there is a specific problem with the quality of the service

performed, Customer shall inform EDDYFI in writing and, if feasible, the service will be re-performed

at no additional charge. In the event corrective services are performed by EDDYFI, Customer must

provide adequate access to the equipment to allow EDDYFI to perform these services. Any additional

costs incurred to provide access to the equipment will be the responsibility of the Customer. If re-

performance of the service is not feasible, EDDYFI and Customer shall negotiate in good faith to

arrive at an equitable solution.

REGARDLESS OF WHETHER UNDER CONTRACT OR TORT, NEGLIGENCE, OR ANY OTHER LEGAL

THEORY, THE LIMITED PRODUCT AND SERVICES WARRANTIES SET FORTH HEREIN ARE EXCLUSIVE

AND NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE

IMPLIED WARRANTIES OF MERCHANTIBILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE SHALL

APPLY. THE LIMITED PRODUCT WARRANTY AND THE LIMITED SERVICE WARRANY ARE THE SOLE

LIABILITY OF EDDYFI WITH REGARD TO ITS PRODUCTS AND SERVICES.

LIMITATION OF LIABILITY: EDDYFI’s total liability for any and all losses and damages arising out of

any and all causes whatsoever including, without limitation, defects in the products, services,

software, documentation, or sitework supplied, shall in no event exceed the purchase price of the

applicable item(s). In no case shall EDDYFI be liable for any special, incidental or consequential

damages based upon breach of warranty, breach of contract, negligence, direct liability or any

other legal theory. Excluded damages include, but are not limited to; loss of profit, loss of savings

or revenue or other commercial or economics losses, loss of use of the product or any associated

equipment, downtime, the claims of third parties, including Customer, damage to property or injury

to personnel. Nothing in these conditions shall however limit or exclude EDDYFI’s liability for any

matter in respect of which it would be unlawful for EDDYFI to exclude or restrict liability.

Copyrights

This document and the product and programs it describes are protected by copyright laws in the UK,

by laws of other countries, and by international treaties, therefore may not be reproduced, in whole

or in part, whether for sale or not, without prior written consent from Eddyfi UK Ltd. Under copyright

law, copying includes translation in other languages and formats.

This document was prepared with particular attention to usage to ensure the accuracy of the

information it contains. It corresponds to the version of the product manufactured prior to the date

appearing on the inside front cover. There may, however, be some differences between this

document and the product, if the product was modified after publication.

The information contained in this document is subject to change without notice.

R-Scan Array

Inhaltsverzeichnis

Andere eddyfi Diagnosegeräte Handbücher

eddyfi

eddyfi PIPESCAN HD Bedienungsanleitung

Beliebte Diagnosegeräte Handbücher anderer Marken

Mindray

Mindray M7Vet Kurzanleitung

Autel

Autel MaxiProgrammer 201 Bedienungsanleitung

TEXA

TEXA TMD2 Bedienungsanleitung

Autel

Autel MaxiIM IM608 Bedienungsanleitung

Sealey

Sealey BT2012 Bedienungsanleitung

Diagnoptics

Diagnoptics Age Reader Bedienungsanleitung

LAUNCH TECH

LAUNCH TECH X-431 PRO5 Bedienungsanleitung

Hella Gutmann

Hella Gutmann Mega macs X Bedienungsanleitung

Foxwell

Foxwell I80TS Bedienungsanleitung

KaVo

KaVo 3D eXam Bedienungsanleitung

ATEQ

ATEQ VT46 Bedienungsanleitung

Hella Gutmann

Hella Gutmann mega macs X Bedienungsanleitung

Autel

Autel MaxiFlash VCMI Bedienungsanleitung

Qiagen

Qiagen QIAcube Connect MDx Bedienungsanleitung

Alber

Alber BDSU Bedienungsanleitung

St. Jude Medical

St. Jude Medical QUANTIEN Bedienungsanleitung

Bosch

Bosch DCU 100 Bedienungsanleitung

Launch

Launch CNC-602A Bedienungsanleitung

eddyfi R-Scan Array Bedienungsanleitung

Beliebte Diagnosegeräte Handbücher anderer Marken